English
  • head_banner_01

Weidmuller ACT20M-2CI-2CO-ILP-S 1176080000 Passive Isolator

  • Weidmuller ACT20M-2CI-2CO-ILP-S 1176080000 Passive Isolator
  • Weidmuller ACT20M-2CI-2CO-ILP-S 1176080000 Passive Isolator
  • Weidmuller ACT20M-2CI-2CO-ILP-S 1176080000 Passive Isolator

Short Description:

Weidmuller ACT20M-2CI-2CO-ILP-S 1176080000  is Passive isolator, Input current loop feed, 2-channel, Input : 2 x 0(4) – 20 mA, Output : 2 x 0(4) – 20 mA

 

Item No.1176080000

 

 

 

 

 

 

 


  • :

    • Product Detail

    Product Tags

    Weidmuller ACT20M-2CI-2CO-ILP-S 1176080000

     

    ACT20M: The slim solution

    • Safe and space-saving (6 mm) isolation and conversion

    • Quick installation of the power supply unit using the

    CH20M mounting rail bus

    • Easy configuration via DIP switch or FDT/DTM software

    • Extensive approvals such as ATEX, IECEX, GL, DNV

    • High interference resistance

    General ordering data

     

    Version

    Passive isolator, Input current loop feed, 2-channel,

    Input : 2 x 0(4) - 20 mA, Output : 2 x 0(4) - 20 mA
    Order No. 1176080000
    Type ACT20M-2CI-2CO-ILP-S
    GTIN (EAN) 4032248970001
    Qty. 1 items

    Dimensions and weights

     

    Depth 114.3 mm Depth (inches) 4.5 inch
    Height 112.5 mm Height (inches) 4.4291 inch
    Width 6.1 mm Width (inches) 0.2402 inch
    Net weight 97 g

    Data

     

    Step response time ≤ 5 ms Mounting rail TS 35
    Power consumption 30 mW per channel Temperature coefficient ≤ 0.01 % / °C
    Nominal power consumption 1.2 VA Configuration none
    Operating altitude ≤ 2000 m
    Insulation coordination
    EMC standards EN 61326-122.5 kVeff /1 min. Surge voltage category II
    Pollution severity Galvanic isolation 2-way isolator
    Insulation voltage Rated voltage 300 Veff
    Data for Ex applications (ATEX)
    Marking II 3 G Ex nA IIC T4 Gc      IECEx - gas labelling Ex nA IIC T4 Gc, Standard:
    IEC 60079-0-15
    Installation location Device installed in safe
    area, zone 2
    Connection data
    Type of connection Screw connection Tightening torque, min. 0.4 Nm
    Tightening torque, max. 0.6 Nm Clamping range, rated connection 2.5 mm²
    Clamping range, min. 0.5 mm² Clamping range, max. 2.5 mm²
    Wire connection cross section AWG, AWG 30 Wire connection cross section AWG, AWG 14
    min. max.
    EMC conformity and approvals
    EMC standards                     EN 61326-1               Standards                      IEC 61010-1
    Part description
    Product description               The ACT20M-CI-CO-ILP-S passive isolator isolates standard analogue current signals. An analogueinput current signal is linearly converted to an analogue output current signal and is galvanically isolated.

    Power is supplied through the input measuring circuit (input loop-powered).

    The passive isolator ACT20M-2CI-2CO-ILP-S offers the same functionality, but has two galvanically isolated channels.
    Classifications
    ETIM 8.0 EC002653 ETIM 9.0 EC002653
    ETIM 10.0 EC002653 ECLASS 14.0 27-21-01-20
    ECLASS 15.0 27-21-01-20
    Tender specification sheets
    Long specification                Standard signal passiveisolator2-channel passive isolator in 6.1 mm width input-

    loop powered,

    for transmitting and

    isolating analogue DC current signals 0/4...20 mA.

    Add-on housing for TS35

    rail mounting

    Dimensions: L/W/H

    114.3/ 6.1/ 112.5 mm

    		 Short specification Standard signal passiveisolator2-channel signal passive

    isolator in 6.1 mm width

    with input current loop

    feed,

    for transmitting and

    isolating analogue DC

    current signals from 0/4 to

    20 mA

    Related models

     

    ACT20M-CI-CO-ILP-S 1176070000
    ACT20M-2CI-2CO-ILP-S 1176080000

    ACT20M-CI-CO-OLP-S 1176040000

    ACT20M-2CI-2CO-OLP-S 1176050000

  • Previous:
  • Next:
    • Write your message here and send it to us

    Related products

    • WAGO 283-101 2-conductor Through Terminal Block

      WAGO 283-101 2-conductor Through Terminal Block

      Date Sheet   Connection data Connection points 2 Total number of potentials 1 Number of levels 1   Physical data Width 12 mm / 0.472 inches Height 58 mm / 2.283 inches Depth from upper-edge of DIN-rail 45.5 mm / 1.791 inches     Wago Terminal Blocks   Wago terminals, also known as Wago connectors or clamps, represent a groundbreaki...

      See more products >
    • WAGO 750-8212 Controller

      WAGO 750-8212 Controller

      Commerial Date   Connection data Connection technology: communication/fieldbus Modbus (TCP, UDP): 2 x RJ-45; Modbus RTU: 1 x D-sub 9 socket; RS-232 serial interface: 1 x D-sub 9 socket; RS-485 interface: 1 x D-sub 9 socket Connection technology: system supply 2 x CAGE CLAMP® Connection technology: field supply 6 x CAGE CLAMP® Connectable conductor materials Copper Connection type System/field supply Solid conductor 0.08 … 2.5...

      See more products >
    • Hirschmann RSP35-08033O6TT-EK9Y9HPE2SXX.X.XX Compact Managed Industrial DIN Rail Switch

      Hirschmann RSP35-08033O6TT-EK9Y9HPE2SXX.X.XX Co...

      Product description Description Managed Industrial Switch for DIN Rail, fanless design Fast Ethernet, Gigabit uplink type - Enhanced (PRP, Fast MRP, HSR, NAT (-FE only) with L3 type) Port type and quantity 11 Ports in total: 3 x SFP slots (100/1000 Mbit/s); 8x 10/100BASE TX / RJ45 More Interfaces Power supp...

      See more products >
    • Hirschmann BAT450-FUS599CW9M9AT699AB9D9H Industrial Wireless

      Hirschmann BAT450-FUS599CW9M9AT699AB9D9H Indust...

      Product description   Product: BAT450-FUS599CW9M9AT699AB9D9HXX.XX.XXXX Configurator: BAT450-F configurator   Product description Description Dual Band Ruggedized (IP65/67) Industrial Wireless LAN Access Point/Client for installation in harsh environment. Port type and quantity First Ethernet: 8-pin, X-coded M12 Radio protocol IEEE 802.11a/b/g/n/ac WLAN interface as per IEEE 802.11ac, up to 1300 Mbit/s gross bandwidth Countr...

      See more products >
    • MOXA A52-DB9F w/o Adapter converter with DB9F cable

      MOXA A52-DB9F w/o Adapter converter with DB9F c...

      Introduction   The A52 and A53 are general RS-232 to RS-422/485 converters designed for users who need to extend RS-232 transmission distance and increase networking capability. Features and Benefits Automatic Data Direction Control (ADDC) RS-485 data control Automatic baudrate detection RS-422 hardware flow control: CTS, RTS signals LED indicators for power and signal...

      See more products >
    • WAGO 750-559 Analog Ouput Module

      WAGO 750-559 Analog Ouput Module

      WAGO I/O System 750/753 Controller   Decentralized peripherals for a variety of applications: WAGO's remote I/O system has more than 500 I/O modules, programmable controllers and communication modules to provide automation needs and all communication buses required. All features.   Advantage: Supports the most communication buses – compatible with all standard open communication protocols and ETHERNET standards Wide range of I/O modules ...

      See more products >
    Hit enter to search or ESC to close