Weidmuller WQV 2.5/15 1059660000 Terminals Cross-connector
Weidmüller offers plug-in and screwed cross-connection systems for screw-connection
terminal blocks. The plug-in cross-connections feature easy handling and quick installation.
This saves a great deal of time during installation in comparison with screwed solutions. This also ensures that all poles always contact reliably.
Fitting and changing cross connections
The fitting and changing of cross-connections is a trouble-free and fast operation:
– Insert the cross-connection into the cross connection channel in the terminal...and press it fully home. (The cross-connection may not project from the channel.) Remove a cross-connection by simply prising it out with a screwdriver.
Shortening cross-connections
Cross-connections can be shortened in length using a suitable cutting tool, However, three contact elements must always be retained.
Breaking out contact elements
If one or more (max. 60 % for reasons of stability and temperature rise) of the contact elements are broken out of the cross-connections, terminals may be bypassed to suit the application.
Caution:
Contact elements must not be deformed!
Note: By using manually cut ZQV and crossconnections with blank cut edges (> 10 poles) the voltage reduces to 25 V.
Related products
-
Weidmuller ZPE 10 1746770000 PE Terminal Block
Weidmuller Z series terminal block characters: Time saving 1.Integrated test point 2.Simple handling thanks to parallel alignment of conductor entry 3.Can be wired without special tools Space saving 1.Compact design 2.Length reduced by up to 36 percent in roof style Safety 1.Shock and vibration proof• 2.Separation of electrical and mechanical functions 3.No-maintenance connection for a safe, gas-tight contacting...
-
MOXA TSN-G5008-2GTXSFP Full Gigabit Managed Ind...
Features and Benefits Compact and flexible housing design to fit into confined spaces Web-based GUI for easy device configuration and management Security features based on IEC 62443 IP40-rated metal housing Ethernet Interface Standards IEEE 802.3 for10BaseTIEEE 802.3u for 100BaseT(X) IEEE 802.3ab for 1000BaseT(X) IEEE 802.3z for 1000B...
-
MOXA ioMirror E3210 Universal Controller I/O
Introduction The ioMirror E3200 Series, which is designed as a cable-replacement solution to connect remote digital input signals to output signals over an IP network, provides 8 digital input channels, 8 digital output channels, and a 10/100M Ethernet interface. Up to 8 pairs of digital input and output signals can be exchanged over Ethernet with another ioMirror E3200 Series device, or can be sent to a local PLC or DCS controller. Ove...
-
MOXA ioLogik R1240 Universal Controller I/O
Introduction The ioLogik R1200 Series RS-485 serial remote I/O devices are perfect for establishing a cost-effective, dependable, and easy-to-maintain remote process control I/O system. Remote serial I/O products offer process engineers the benefit of simple wiring, as they only require two wires to communicate with the controller and other RS-485 devices while adopting the EIA/TIA RS-485 communication protocol to transmit and receive d...
-
Harting 09 67 009 5601 D-Sub crimp 9-pole male ...
Product Details Identification Category Connectors Series D-Sub Identification Standard Element Connector Version Termination method Crimp termination Gender Male Size D-Sub 1 Connection type PCB to cable Cable to cable Number of contacts 9 Locking type Fixing flange with feed through hole Ø 3.1 mm Details Please order crimp contacts separately. Technical char...
-
Hirschmann RS30-0802O6O6SDAE Compact Managed In...
Product description Description Managed Gigabit / Fast Ethernet industrial switch for DIN rail, store-and-forward-switching, fanless design ; Software Layer 2 Enhanced Part Number 943434031 Port type and quantity 10 ports in total: 8 x standard 10/100 BASE TX, RJ45 ; Uplink 1: 1 x Gigabit SFP-slot ; Uplink 2: 1 x Gigabit SFP-Slot More Int...