English
  • head_banner_01

Weidmuller ACT20M-CI-CO-OLP-S 1176040000 Passive Isolator

  • Weidmuller ACT20M-CI-CO-OLP-S 1176040000 Passive Isolator
  • Weidmuller ACT20M-CI-CO-OLP-S 1176040000 Passive Isolator
  • Weidmuller ACT20M-CI-CO-OLP-S 1176040000 Passive Isolator

Short Description:

Weidmuller ACT20M-CI-CO-OLP-S 1176040000 Passive Isolator is Passive isolator, Output current loop powered, 1-channel, Input : 4-20 mA, Output : 4-20 mA

 

Item No.1176040000

 

 

 

 

 

 

 

 


  • :

    • Product Detail

    Product Tags

    Weidmuller ACT20M-CI-CO-OLP-S 1176040000

     

    ACT20M: The slim solution

    • Safe and space-saving (6 mm) isolation and conversion

    • Quick installation of the power supply unit using the

    CH20M mounting rail bus

    • Easy configuration via DIP switch or FDT/DTM software

    • Extensive approvals such as ATEX, IECEX, GL, DNV

    • High interference resistance

    General ordering data

     

    Version Passive isolator, Output current loop powered, 1-channel, Input : 4-20 mA, Output : 4-20 mA
    Order No. 1176040000
    Type ACT20M-CI-CO-OLP-S
    GTIN (EAN) 4032248970155
    Qty. 1 items

    Dimensions and weights

     

    Depth 114.3 mm Depth (inches) 4.5 inch
    Height 112.5 mm Height (inches) 4.4291 inch
    Width 6.1 mm Width (inches) 0.2402 inch
    Net weight 80 g

    Data

     

    Input
    Sensor 2-wire transmitter (withoutown power supply)

    6…35 V (@ 20 mA)

    Typical 2.5 V

    		 Number inputs 1
    Sensor supply Input current 4…20mA
    Voltage drop, current input
    Output
    Number of outputs 1passive, connected control

    must be active

    100 Hz

    		 Load impedance current ≤ 600 Ω, @ max 23mA
    Type Output current 4...20 mA
    Cut-off frequency (-3 dB) Supply voltage (output) 6…35 V
    General data
    Accuracy <0.05 % of measuring Protection degree IP20
    range
    Supply voltage Output loop powered Step response time ≤ 5 ms

     

     

    Insulation coordination
    EMC standards EN 61326-12

    2.5 kVeff /1 min.

    		 Surge voltage category II
    Pollution severity Galvanic isolation 2-way isolator
    Insulation voltage Rated voltage 300 Veff
    Data for Ex applications (ATEX)
    Marking II 3 G Ex nA IIC T4 Gc               IECEx - gas labelling Ex nA IIC T4 Gc, Standard:
    IEC 60079-0-15
    Installation location Device installed in safe
    area, zone 2
    Connection data
    Type of connection Screw connection Tightening torque, min. 0.4 Nm
    Tightening torque, max. 0.6 Nm Clamping range, rated connection 2.5 mm²
    Clamping range, min. 0.5 mm² Clamping range, max. 2.5 mm²
    Wire connection cross section AWG, AWG 30 Wire connection cross section AWG, AWG 14
    min. max.
    EMC conformity and approvals
    EMC standards                                     EN 61326-1                            Standards                                             IEC 61010-1
    Part description
    Product description The passive isolator ACT20M-CI-CO-OLP-S isolates standard analogue current signals. An analogue input current signal is linearly converted into an analogue output current signal and is galvanically  isolated. Power is supplied through the output measuring circuit (output loop-powered).

    Related models

     

    ACT20M-CI-CO-ILP-S 1176070000
    ACT20M-2CI-2CO-ILP-S 1176080000

    ACT20M-CI-CO-OLP-S 1176040000

    ACT20M-2CI-2CO-OLP-S 1176050000

  • Previous:
  • Next:
    • Write your message here and send it to us

    Related products

    • MOXA EDS-516A-MM-SC 16-port Managed Industrial Ethernet Switch

      MOXA EDS-516A-MM-SC 16-port Managed Industrial ...

      Features and Benefits Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and STP/RSTP/MSTP for network redundancyTACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network security Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01 Supports MXstudio for easy, visualized industrial network management ...

      See more products >
    • Weidmuller ZQV 2.5/9 1608930000 Cross-connector

      Weidmuller ZQV 2.5/9 1608930000 Cross-connector

      Weidmuller Z series terminal block characters: The distribution or multiplication of a potential to adjoining terminal blocks is realized via a cross-connection. Additional wiring effort can be easily avoided. Even if the poles are broken out, contact reliability in the terminal blocks is still ensured. Our portfolio offers pluggable and screwable cross-connection systems for modular terminal blocks.   2.5 m...

      See more products >
    • Weidmuller SAKDU 35 1257010000 Feed Through Terminal

      Weidmuller SAKDU 35 1257010000 Feed Through Ter...

      Description: To feed through power, signal, and data is the classical requirement in electrical engineering and panel building. The insulating material, the connection system and the design of the terminal blocks are the differentiating features. A feed-through terminal block is suitable for joining and/or connecting one or more conductors. They could have one or more connection levels that are on the same potenti...

      See more products >
    • Weidmuller WDU 4/ZZ 1905060000 Feed-through Terminal

      Weidmuller WDU 4/ZZ 1905060000 Feed-through Ter...

      Weidmuller W series terminal characters Whatever your requirements for the panel: our screw connection system with patented clamping yoke technology ensures the ultimate in contact safety. You can use both screw-in and plug-in cross-connections for potential distribution.Two conductors of the same diameter can also be connected in a single terminal point in accordance with UL1059.The screw connection has long bee...

      See more products >
    • Weidmuller PZ 6/5 9011460000 Pressing Tool

      Weidmuller PZ 6/5 9011460000 Pressing Tool

      Weidmuller Crimping tools   Crimping tools for wire end ferrules, with and without plastic collars Ratchet guarantees precise crimping Release option in the event of incorrect operation After stripping the insulation, a suitable contact or wire end ferrule can be crimped onto the end of the cable. Crimping forms a secure connection between conductor and contact and has largely replaced soldering. Crimping denotes the creation of a homogen...

      See more products >
    • MOXA A-ADP-RJ458P-DB9F-ABC01 Connector

      MOXA A-ADP-RJ458P-DB9F-ABC01 Connector

      Moxa's cables   Moxa's cables come in a variety of lengths with multiple pin options to ensure compatibility for a wide range of applications. Moxa's connectors include a selection of pin and code types with high IP ratings to ensure suitability for industrial environments.   Specifications   Physical Characteristics Description TB-M9: DB9 ...

      See more products >
    Hit enter to search or ESC to close