• head_banner_01

Weidmuller ACT20M-2CI-2CO-OLP-S 1176050000 Passive Isolator

Short Description:

Weidmuller ACT20M-2CI-2CO-OLP-S 1176050000 is Passive isolator, Output current loop powered, 2-channel, Input : 2 x 4-20 mA, Output : 2 x 4-20 mA

Item No.1176050000

 

 

 

 

 

 

 

 


  • :
  • Product Detail

    Product Tags

    Weidmuller ACT20M-2CI-2CO-OLP-S 1176050000

     

    ACT20M: The slim solution

    • Safe and space-saving (6 mm) isolation and conversion

    • Quick installation of the power supply unit using the

    CH20M mounting rail bus

    • Easy configuration via DIP switch or FDT/DTM software

    • Extensive approvals such as ATEX, IECEX, GL, DNV

    • High interference resistance

    General ordering data

     

    Version Passive isolator, Output current loop powered, 2-channel, Input : 2 x 4-20 mA, Output : 2 x 4-20

    mA

    Order No. 1176050000
    Type ACT20M-2CI-2CO-OLP-S
    GTIN (EAN) 4032248969999
    Qty. 1 items

    Dimensions and weights

     

    Depth 114.3 mm Depth (inches) 4.5 inch
    Height 112.5 mm Height (inches) 4.4291 inch
    Width 6.1 mm Width (inches) 0.2402 inch
    Net weight 96 g

    Data

     

    Temperatures
     
    Storage temperature -40 °C...85 °C

    0...95 % (no condensation)

    Operating temperature -25 °C...70 °C
    Humidity at operating temperature   Humidity

    40 °C / 93 % rel. humidity,

    no condensation

    Probability of failure
     
    SIL in compliance with IEC 61508           None
    Environmental Product Compliance
     
    RoHS Compliance Status Compliant with exemption
    RoHS Exemption (if applicable/known) 7a, 7cI
    REACH SVHC Lead 7439-92-1
    SCIP 2f6dd957-421a-46db-a0c2-cf1609156924
    Input
     
    Sensor 2-wire transmitter (without

    own power supply)

    6…35 V (@ 20 mA)

    Typical 2.5 V

    Number inputs 2
    Sensor supply   Input current 4...20 mA
    Voltage drop, current input    
    General data
     
    Accuracy <0.05 % of measuring

    range

    Protection degree IP20
    Supply voltage Output loop powered Step response time  5 ms
    Mounting rail TS 35 Temperature coefficient ≤± 0.07 µA x (Δ °C x V supply) @ Tamb <25 °C
    Nominal power consumption 0.05 VA Configuration none
    Operating altitude  2000 m Power consumption, max. 0.1 mW
    Power consumption, typ. 0.05 W    
    Insulation coordination
     
    EMC standards EN 61326-1, EN Surge voltage category II
      61326-3-1    
    Pollution severity 2 Galvanic isolation 2-way isolator
    Insulation voltage 2.5 kVeff /1 min. Rated voltage 300 Veff
    Data for Ex applications (ATEX)
     
    Marking II 3 G Ex nA IIC T4 Gc               IECEx - gas labelling Ex nA IIC T4 Gc, Standard:
        IEC 60079-0-15
    Installation location Device installed in safe  
      area, zone 2  
    Connection data
     
    Type of connection Screw connection Tightening torque, min. 0.4 Nm
    Tightening torque, max. 0.6 Nm Clamping range, rated connection 2.5 mm²
    Clamping range, min. 0.5 mm² Clamping range, max. 2.5 mm²
    Wire connection cross section AWG, AWG 30 Wire connection cross section AWG, AWG 14
    min.   max.  
    EMC conformity and approvals
     
    EMC standards EN 61326-1, EN

    61326-3-1

    Standards IEC 61010-1

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • MOXA MGate MB3170-T Modbus TCP Gateway

      MOXA MGate MB3170-T Modbus TCP Gateway

      Features and Benefits Supports Auto Device Routing for easy configuration Supports route by TCP port or IP address for flexible deployment Connects up to 32 Modbus TCP servers Connects up to 31 or 62 Modbus RTU/ASCII slaves Accessed by up to 32 Modbus TCP clients (retains 32 Modbus requests for each Master) Supports Modbus serial master to Modbus serial slave communications Built-in Ethernet cascading for easy wir...

    • WAGO  750-493/000-001 Power Measurement Module

      WAGO  750-493/000-001 Power Measurement Module

      WAGO I/O System 750/753 Controller   Decentralized peripherals for a variety of applications: WAGO's remote I/O system has more than 500 I/O modules, programmable controllers and communication modules to provide automation needs and all communication buses required. All features.   Advantage: Supports the most communication buses – compatible with all standard open communication protocols and ETHERNET standards Wide range of I/O modules ...

    • Weidmuller WPE 95N/120N 1846030000 PE Earth Terminal

      Weidmuller WPE 95N/120N 1846030000 PE Earth Ter...

      Weidmuller Earth terminal blocks characters The safety and availability of plants must be guaranteed at all times.Careful planning and installation of safety functions play a particularly important role. For personnel protection, we offer a wide range of PE terminal blocks in different connection technologies. With our wide range of KLBU shield connections, you can achieve flexible and self-adjusting shield contac...

    • Weidmuller WDTR 2.5 2456000000 Test-disconnect Terminal

      Weidmuller WDTR 2.5 2456000000 Test-disconnect ...

      General ordering data   Version Test-disconnect terminal, Screw connection, dark beige, 2.5 mm², 17 A, 500 V, Number of connec- tions: 4, Number of levels: 2 Order No. 2456000000 Type WDTR 2.5 GTIN (EAN) 4050118515275 Qty. 25 items Dimensions and weights   Depth 65 mm Depth (inches) 2.5591 inch Height 94 mm Height (inches) 3.7008 inch Width 6....

    • WAGO 750-414 4-channel digital input

      WAGO 750-414 4-channel digital input

      Physical data   Width 12 mm / 0.472 inches Height 100 mm / 3.937 inches Depth 69.8 mm / 2.748 inches Depth from upper-edge of DIN-rail 62.6 mm / 2.465 inches     WAGO I/O System 750/753 Controller   Decentralized peripherals for a variety of applications: WAGO's remote I/O system has more than 500 I/O modules, programmable controllers and communication modules to provide ...

    • WAGO 750-450 Analog Input Module

      WAGO 750-450 Analog Input Module

      WAGO I/O System 750/753 Controller   Decentralized peripherals for a variety of applications: WAGO's remote I/O system has more than 500 I/O modules, programmable controllers and communication modules to provide automation needs and all communication buses required. All features.   Advantage: Supports the most communication buses – compatible with all standard open communication protocols and ETHERNET standards Wide range of I/O modules ...