MOXA EDS-316-MM-SC 16-port Unmanaged Industrial Ethernet Switch
Relay output warning for power failure and port break alarm
Broadcast storm protection
-40 to 75°C operating temperature range (-T models)
Ethernet Interface
| 10/100BaseT(X) Ports (RJ45 connector) | EDS-316 Series: 16 EDS-316-MM-SC/MM-ST/MS-SC/SS-SC Series, EDS-316-SS-SC-80: 14 EDS-316-M-SC/M-ST/S-SC Series: 15All models support: Auto negotiation speed Full/Half duplex mode Auto MDI/MDI-X connection |
| 100BaseFX Ports (multi-mode SC connector) | EDS-316-M-SC: 1 EDS-316-M-SC-T: 1 EDS-316-MM-SC: 2 EDS-316-MM-SC-T: 2 EDS-316-MS-SC: 1 |
| 100BaseFX Ports (multi-mode ST connector) | EDS-316-M-ST Series: 1 EDS-316-MM-ST Series: 2 |
| 100BaseFX Ports (single-mode SC connector) | EDS-316-MS-SC, EDS-316-S-SC Series: 1 EDS-316-SS-SC Series: 2 |
| 100BaseFX Ports (single-mode SC connector, 80 km | EDS-316-SS-SC-80: 2 |
| Standards | IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) and 100BaseFX IEEE 802.3x for flow control |
Physical characteristics
| Installation | DIN-rail mountingWall mounting (with optional kit) |
| IP Rating | IP30 |
| Weight | 1140 g (2.52 lb) |
| Housing | Metal |
| Dimensions | 80.1 x 135 x 105 mm (3.15 x 5.31 x 4.13 in) |
MOXA EDS-316-MM-SC Available Models
| Model 1 | MOXA EDS-316 |
| Model 2 | MOXA EDS-316-MM-SC |
| Model 3 | MOXA EDS-316-MM-ST |
| Model 4 | MOXA EDS-316-M-SC |
| Model 5 | MOXA EDS-316-MS-SC |
| Model 6 | MOXA EDS-316-M-ST |
| Model 7 | MOXA EDS-316-S-SC |
| Model 8 | MOXA EDS-316-SS-SC |
Related products
-
MOXA EDS-G508E Managed Ethernet Switch
Introduction The EDS-G508E switches are equipped with 8 Gigabit Ethernet ports, making them ideal for upgrading an existing network to Gigabit speed or building a new full Gigabit backbone. Gigabit transmission increases bandwidth for higher performance and transfers large amounts of triple-play services across a network quickly. Redundant Ethernet technologies such as Turbo Ring, Turbo Chain, RSTP/STP, and MSTP increase the reliability of yo...
-
MOXA DK35A DIN-rail Mounting Kit
Introduction The DIN-rail mounting kits make it easy to mount Moxa products on a DIN rail. Features and Benefits Detachable design for easy mounting DIN-rail mounting ability Specifications Physical Characteristics Dimensions DK-25-01: 25 x 48.3 mm (0.98 x 1.90 in) DK35A: 42.5 x 10 x 19.34...
-
MOXA TCF-142-S-SC Industrial Serial-to-Fiber Co...
Features and Benefits Ring and point-to-point transmission Extends RS-232/422/485 transmission up to 40 km with single-mode (TCF- 142-S) or 5 km with multi-mode (TCF-142-M) Decreases signal interference Protects against electrical interference and chemical corrosion Supports baudrates up to 921.6 kbps Wide-temperature models available for -40 to 75°C environments ...
-
MOXA NDR-120-24 Power Supply
Introduction The NDR Series of DIN rail power supplies is designed specifically for use in industrial applications. The 40 to 63 mm slim form-factor enables the power supplies to be easily installed in small and confined spaces such as cabinets. The broad operating temperature range of -20 to 70°C means they are capable of operating in harsh environments. The devices have a metal housing, an AC input range from 90...
-
MOXA MGate MB3180 Modbus TCP Gateway
Features and Benefits FeaSupports Auto Device Routing for easy configuration Supports route by TCP port or IP address for flexible deployment Converts between Modbus TCP and Modbus RTU/ASCII protocols 1 Ethernet port and 1, 2, or 4 RS-232/422/485 ports 16 simultaneous TCP masters with up to 32 simultaneous requests per master Easy hardware setup and configurationtures and Benefits ...
-
MOXA ICF-1150-S-SC-T Serial-to-Fiber Converter
Features and Benefits 3-way communication: RS-232, RS-422/485, and fiber Rotary switch to change the pull high/low resistor value Extends RS-232/422/485 transmission up to 40 km with single-mode or 5 km with multi-mode -40 to 85°C wide-temperature range models available C1D2, ATEX, and IECEx certified for harsh industrial environments Specifications ...