MOXA IMC-101-M-SC Ethernet-to-Fiber Media Converter
10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X
Link Fault Pass-Through (LFPT)
Power failure, port break alarm by relay output
Redundant power inputs
-40 to 75°C operating temperature range (-T models)
Designed for hazardous locations (Class 1 Div. 2/Zone 2, IECEx)
Ethernet Interface
| 10/100BaseT(X) Ports (RJ45 connector) | 1 |
| 100BaseFX Ports (multi-mode SC connector) | IMC-101-M-SC/M-SC-IEX Models: 1 |
| 100BaseFX Ports (multi-mode ST connector) | IMC-101-M-ST/M-ST-IEX Models: 1 |
| 100BaseFX Ports (single-mode SC connector) | IMC-101-S-SC/S-SC-80/S-SC-IEX/S-SC-80-IEX Models: 1 |
Power Parameters
| Input Current | 200 mA@12to45 VDC |
| Input Voltage | 12to45 VDC |
| Overload Current Protection | Supported |
| Power Connector | Terminal block |
| Power Consumption | 200 mA@12to45 VDC |
Physical Characteristics
| IP Rating | IP30 |
| Housing | Metal |
| Dimensions | 53.6 x135x105 mm (2.11 x 5.31 x 4.13 in) |
| Weight | 630 g (1.39 lb) |
| Installation | DIN-rail mounting |
Environmental Limits
| Operating Temperature | Standard Models: 0 to 60°C (32 to 140°F)Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Storage Temperature (package included) | -40 to 85°C (-40 to185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
IMC-101-M-SC Series Available Models
| Model Name | OperatingTemp. | FiberModuleType | IECEx | Fiber Transmission Distance |
| IMC-101-M-SC | 0 to 60°C | Multi-modeSC | - | 5 km |
| IMC-101-M-SC-T | -40 to 75°C | Multi-modeSC | - | 5 km |
| IMC-101-M-SC-IEX | 0 to 60°C | Multi-modeSC | / | 5 km |
| IMC-101-M-SC-T-IEX | -40 to 75°C | Multi-modeSC | / | 5 km |
| IMC-101-M-ST | 0 to 60°C | Multi-mode ST | - | 5 km |
| IMC-101-M-ST-T | -40 to 75°C | Multi-mode ST | - | 5 km |
| IMC-101-M-ST-IEX | 0 to 60°C | Multi-modeST | / | 5 km |
| IMC-101-M-ST-T-IEX | -40 to 75°C | Multi-mode ST | / | 5 km |
| IMC-101-S-SC | 0 to 60°C | Single-mode SC | - | 40 km |
| IMC-101-S-SC-T | -40 to 75°C | Single-mode SC | - | 40 km |
| IMC-101-S-SC-IEX | 0 to 60°C | Single-mode SC | / | 40 km |
| IMC-101-S-SC-T-IEX | -40 to 75°C | Single-mode SC | / | 40 km |
| IMC-101-S-SC-80 | 0 to 60°C | Single-mode SC | - | 80 km |
| IMC-101-S-SC-80-T | -40 to 75°C | Single-mode SC | - | 80 km |
Related products
-
MOXA NPort 5150 Industrial General Device Server
Features and Benefits Small size for easy installation Real COM and TTY drivers for Windows, Linux, and macOS Standard TCP/IP interface and versatile operation modes Easy-to-use Windows utility for configuring multiple device servers SNMP MIB-II for network management Configure by Telnet, web browser, or Windows utility Adjustable pull high/low resistor for RS-485 ports ...
-
MOXA TCC-80 Serial-to-Serial Converter
Introduction The TCC-80/80I media converters provide complete signal conversion between RS-232 and RS-422/485, without requiring an external power source. The converters support both half-duplex 2-wire RS-485 and full-duplex 4-wire RS-422/485, either of which can be converted between RS-232’s TxD and RxD lines. Automatic data direction control is provided for RS-485. In this case, the RS-485 driver is enabled automatically whe...
-
Moxa NPort P5150A Industrial PoE Serial Device ...
Features and Benefits IEEE 802.3af-compliant PoE power device equipment Speedy 3-step web-based configuration Surge protection for serial, Ethernet, and power COM port grouping and UDP multicast applications Screw-type power connectors for secure installation Real COM and TTY drivers for Windows, Linux, and macOS Standard TCP/IP interface and versatile TCP and UDP operation modes ...
-
MOXA EDS-408A-3S-SC Industrial Ethernet Switch
Features and Benefits Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and RSTP/STP for network redundancy IGMP Snooping, QoS, IEEE 802.1Q VLAN, and port-based VLAN supported Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01 PROFINET or EtherNet/IP enabled by default (PN or EIP models) Supports MXstudio for easy, visualized industrial network mana...
-
MOXA MGate 4101I-MB-PBS Fieldbus Gateway
Introduction The MGate 4101-MB-PBS gateway provides a communication portal between PROFIBUS PLCs (e.g., Siemens S7-400 and S7-300 PLCs) and Modbus devices. With the QuickLink feature, I/O mapping can be accomplished within a matter of minutes. All models are protected with a rugged metallic casing, are DIN-rail mountable, and offer optional built-in optical isolation. Features and Benefits ...
-
MOXA 45MR-3800 Advanced Controllers & I/O
Introduction Moxa’s ioThinx 4500 Series (45MR) Modules are available with DI/Os, AIs, relays, RTDs, and other I/O types, giving users a wide variety of options to choose from and allowing them to select the I/O combination that best fits their target application. With its unique mechanical design, hardware installation and removal can be done easily without tools, greatly reducing the amount of time required to se...