MOXA MGate 5101-PBM-MN Modbus TCP Gateway
Protocol conversion between PROFIBUS and Modbus TCP
Supports PROFIBUS DP V1 master
Supports Modbus TCP client/server
Automatic scan of PROFIBUS devices and easy configuration
Web-based GUI for I/O data visualization
Embedded traffic monitoring/diagnostic information for easy troubleshooting
Status monitoring and fault protection for easy maintenance
Supports redundant dual DC power inputs and 1 relay output
-40 to 75°C wide operating temperature models available
Serial port with 2 kV isolation protection
Security features based on IEC 62443
Related products
-
MOXA ICF-1150I-M-ST Serial-to-Fiber Converter
Features and Benefits 3-way communication: RS-232, RS-422/485, and fiber Rotary switch to change the pull high/low resistor value Extends RS-232/422/485 transmission up to 40 km with single-mode or 5 km with multi-mode -40 to 85°C wide-temperature range models available C1D2, ATEX, and IECEx certified for harsh industrial environments Specifications ...
-
MOXA EDS-309-3M-SC Unmanaged Ethernet switch
Introduction The EDS-309 Ethernet switches provide an economical solution for your industrial Ethernet connections. These 9-port switches come with a built-in relay warning function that alerts network engineers when power failures or port breaks occur. In addition, the switches are designed for harsh industrial environments, such as the hazardous locations defined by the Class 1 Div. 2 and ATEX Zone 2 standards. The switches ...
-
MOXA MGate 5119-T Modbus TCP Gateway
Introduction The MGate 5119 is an industrial Ethernet gateway with 2 Ethernet ports and 1 RS-232/422/485 serial port. To integrate Modbus, IEC 60870-5-101, and IEC 60870-5-104 devices with an IEC 61850 MMS network, use the MGate 5119 as a Modbus master/client, IEC 60870-5-101/104 master, and DNP3 serial/TCP master to collect and exchange data with IEC 61850 MMS systems. Easy Configuration via SCL Generator The MGate 5119 as an IEC 61850...
-
MOXA TCC-80 Serial-to-Serial Converter
Introduction The TCC-80/80I media converters provide complete signal conversion between RS-232 and RS-422/485, without requiring an external power source. The converters support both half-duplex 2-wire RS-485 and full-duplex 4-wire RS-422/485, either of which can be converted between RS-232’s TxD and RxD lines. Automatic data direction control is provided for RS-485. In this case, the RS-485 driver is enabled automatically whe...
-
MOXA EDS-518A Gigabit Managed Industrial Ethern...
Features and Benefits 2 Gigabit plus 16 Fast Ethernet ports for copper and fiberTurbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), RSTP/STP, and MSTP for network redundancy TACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network security Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01 ...
-
MOXA MGate 5217I-600-T Modbus TCP Gateway
Introduction The MGate 5217 Series comprise 2-port BACnet gateways that can convert Modbus RTU/ACSII/TCP Server (Slave) devices to BACnet/IP Client system or BACnet/IP Server devices to Modbus RTU/ACSII/TCP Client (Master) system. Depending on the size and scale of the network, you can use the 600-point or 1200-point gateway model. All models are rugged, DIN-rail mountable, operate in wide temperatures, and offer built-in 2-kV isolation...