MOXA EDS-518E-4GTXSFP-T Gigabit Managed Industrial Ethernet Switch
4 Gigabit plus 14 fast Ethernet ports for copper and fiberTurbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), RSTP/STP, and MSTP for network redundancy
RADIUS, TACACS+, MAB Authentication, SNMPv3, IEEE 802.1X, MAC ACL, HTTPS, SSH, and sticky MAC-addresses to enhance network security
Security features based on IEC 62443
EtherNet/IP, PROFINET, and Modbus TCP protocols supported for device management and monitoring
Fiber Check™—comprehensive fiber status monitoring and warning on MST/MSC/SSC/SFP fiber ports
Supports MXstudio for easy, visualized industrial network management
V-ON™ ensures millisecond-level multicast data and video network recovery
Input/Output Interface
| Alarm Contact Channels | 1, Relay output with current carrying capacity of 1 A @ 24 VDC |
| Buttons | Reset button |
| Digital Input Channels | 1 |
| Digital Inputs | +13 to +30 V for state 1 -30 to +3 V for state 0 Max. input current: 8 mA |
Ethernet Interface
| 10/100BaseT(X) Ports (RJ45 connector) | EDS-518E-4GTXSFP:14EDS-518E-MM-SC-4GTXSFP/MM-ST-4GTXSFP/SS-SC-4GTXSFP: 12All models support:
Auto negotiation speed Full/Half duplex mode Auto MDI/MDI-Xconnection |
| Combo Ports (10/100/1000BaseT(X) or100/1000BaseSFP+) | 4 |
| 10/100/1000BaseT(X) Ports (RJ45 connector) | Auto negotiation speed Full/Half duplex modeAuto MDI/MDI-X connection |
| 100BaseFX Ports (multi-mode SC connector) | EDS-518E-MM-SC-4GTXSFP Series: 2 |
| 100BaseFX Ports (multi-mode ST connector) | EDS-518E-MM-ST-4GTXSFP Series: 2 |
| 100BaseFX Ports (single-mode SC connector) | EDS-518E-SS-SC-4GTXSFP Series: 2 |
Power Parameters
| Connection | 2 removable 4-contact terminal block(s) |
| Input Current | EDS-518E-4GTXSFP Series: 0.37 A@24 VDCEDS-518E-MM-SC-4GTXSFP/MM-ST-4GTXSFP/SS-SC-4GTXSFP: 0.41 A@24 VDC |
| Input Voltage | 12/24/48/-48 VDC, Redundantdual inputs |
| Operating Voltage | 9.6 to 60 VDC |
| Overload Current Protection | Supported |
| Reverse Polarity Protection | Supported |
Physical Characteristics
| Housing | Metal |
| IP Rating | IP30 |
| Dimensions | 94x135x137 mm (3.7 x 5.31 x 5.39 in) |
| Weight | 1518g(3.35 lb) |
| Installation | DIN-rail mounting, Wall mounting (with optional kit) |
Environmental Limits
| Operating Temperature | Standard Models: -10 to 60°C (14to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Storage Temperature (package included) | -40 to 85°C (-40 to185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
MOXA EDS-518E-4GTXSFP-T Available Models
| Model 1 | MOXA EDS-518E-4GTXSFP |
| Model 2 | MOXA EDS-518E-MM-SC-4GTXSFP |
| Model 3 | MOXA EDS-518E-MM-ST-4GTXSFP |
| Model 4 | MOXA EDS-518E-SS-SC-4GTXSFP |
| Model 5 | MOXA EDS-518E-4GTXSFP-T |
| Model 6 | MOXA EDS-518E-MM-SC-4GTXSFP-T |
| Model 7 | MOXA EDS-518E-MM-ST-4GTXSFP-T |
| Model 8 | MOXA EDS-518E-SS-SC-4GTXSFP-T |
Related products
-
MOXA MGate 5109 1-port Modbus Gateway
Features and Benefits Supports Modbus RTU/ASCII/TCP master/client and slave/server Supports DNP3 serial/TCP/UDP master and outstation (Level 2) DNP3 master mode supports up to 26600 points Supports time-synchronization through DNP3 Effortless configuration via web-based wizard Built-in Ethernet cascading for easy wiring Embedded traffic monitoring/diagnostic information for easy troubleshooting microSD card for co...
-
MOXA TCC 100 Serial-to-Serial Converters
Introduction The TCC-100/100I Series of RS-232 to RS-422/485 converters increases networking capability by extending the RS-232 transmission distance. Both converters have a superior industrial-grade design that includes DIN-rail mounting, terminal block wiring, an external terminal block for power, and optical isolation (TCC-100I and TCC-100I-T only). The TCC-100/100I Series converters are ideal solutions for converting RS-23...
-
MOXA EDS-2010-ML-2GTXSFP 8+2G-port Gigabit Unma...
Introduction The EDS-2010-ML series of industrial Ethernet switches have eight 10/100M copper ports and two 10/100/1000BaseT(X) or 100/1000BaseSFP combo ports, which are ideal for applications that require high-bandwidth data convergence. Moreover, to provide greater versatility for use with applications from different industries, the EDS-2010-ML Series also allows users to enable or disable the Quality of Service...
-
MOXA NPort 5130A Industrial General Device Server
Features and Benefits Power consumption of only 1 W Fast 3-step web-based configuration Surge protection for serial, Ethernet, and power COM port grouping and UDP multicast applications Screw-type power connectors for secure installation Real COM and TTY drivers for Windows, Linux, and macOS Standard TCP/IP interface and versatile TCP and UDP operation modes Connects up to 8 TCP hosts ...
-
MOXA IKS-6728A-4GTXSFP-HV-HV-T 24+4G-port Gigab...
Features and Benefits 8 built-in PoE+ ports compliant with IEEE 802.3af/at (IKS-6728A-8PoE) Up to 36 W output per PoE+ port (IKS-6728A-8PoE) Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches) , and STP/RSTP/MSTP for network redundancy 1 kV LAN surge protection for extreme outdoor environments PoE diagnostics for powered-device mode analysis 4 Gigabit combo ports for high-bandwidth communicatio...
-
MOXA EDS-G308 8G-port Full Gigabit Unmanaged I...
Features and Benefits Fiber-optic options for extending distance and improving electrical noise immunityRedundant dual 12/24/48 VDC power inputs Supports 9.6 KB jumbo frames Relay output warning for power failure and port break alarm Broadcast storm protection -40 to 75°C operating temperature range (-T models) Specifications ...