English
  • head_banner_01

MOXA TCF-142-S-SC-T Industrial Serial-to-Fiber Converter

  • MOXA TCF-142-S-SC-T Industrial Serial-to-Fiber Converter
  • MOXA TCF-142-S-SC-T Industrial Serial-to-Fiber Converter
  • MOXA TCF-142-S-SC-T Industrial Serial-to-Fiber Converter
  • MOXA TCF-142-S-SC-T Industrial Serial-to-Fiber Converter
  • MOXA TCF-142-S-SC-T Industrial Serial-to-Fiber Converter
  • MOXA TCF-142-S-SC-T Industrial Serial-to-Fiber Converter
  • MOXA TCF-142-S-SC-T Industrial Serial-to-Fiber Converter

Short Description:

The TCF-142 media converters are equipped with a multiple interface circuit that can handle RS-232 or RS-422/485 serial interfaces and multimode or single-mode fiber. TCF-142 converters are used to extend serial transmission up to 5 km (TCF-142-M with multi-mode fiber) or up to 40 km (TCF-142-S with single-mode fiber). The TCF-142 converters can be configured to convert either RS-232 signals, or RS-422/485 signals, but not both at the same time.


Product Detail

Product Tags

Features and Benefits

Ring and point-to-point transmission

Extends RS-232/422/485 transmission up to 40 km with single-mode (TCF- 142-S) or 5 km with multi-mode (TCF-142-M)

Decreases signal interference

Protects against electrical interference and chemical corrosion

Supports baudrates up to 921.6 kbps

Wide-temperature models available for -40 to 75°C environments

Specifications

 

Serial Signals

RS-232 TxD, RxD, GND
RS-422 Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w Data+, Data-, GND

 

Power Parameters

No. of Power Inputs 1
Input Current 70to140 mA@12to 48 VDC
Input Voltage 12to48 VDC
Overload Current Protection Supported
Power Connector Terminal block
Power Consumption 70to140 mA@12to 48 VDC
Reverse Polarity Protection Supported

 

Physical Characteristics

IP Rating IP30
Housing Metal
Dimensions (with ears) 90x100x22 mm (3.54 x 3.94 x 0.87 in)
Dimensions (without ears) 67x100x22 mm (2.64 x 3.94 x 0.87 in)
Weight 320 g (0.71 lb)
Installation Wall mounting

 

Environmental Limits

Operating Temperature Standard Models: 0 to 60°C (32 to 140°F)Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature (package included) -40 to 85°C (-40 to185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)

 

MOXA TCF-142-S-SC-T  Available Models

Model Name

OperatingTemp.

FiberModule Type
TCF-142-M-ST

0 to 60°C

Multi-mode ST
TCF-142-M-SC

0 to 60°C

Multi-mode SC
TCF-142-S-ST

0 to 60°C

Single-mode ST
TCF-142-S-SC

0 to 60°C

Single-mode SC
TCF-142-M-ST-T

-40 to 75°C

Multi-mode ST
TCF-142-M-SC-T

-40 to 75°C

Multi-mode SC
TCF-142-S-ST-T

-40 to 75°C

Single-mode ST
TCF-142-S-SC-T

-40 to 75°C

Single-mode SC

 

 

  • Previous:
  • Next:
    • Write your message here and send it to us

    Related products

    • MOXA ANT-WSB-AHRM-05-1.5m Cable

      MOXA ANT-WSB-AHRM-05-1.5m Cable

      Introduction   The ANT-WSB-AHRM-05-1.5m is an omni-directional lightweight compact dual-band high-gain indoor antenna with a SMA (male) connector and magnetic mount. The antenna provides a gain of 5 dBi and is designed to operate in temperatures from -40 to 80°C. Features and Benefits High gain antenna Small size for easy installation Lightweight for portable deploymen...

      See more products >
    • MOXA IKS-6726A-2GTXSFP-24-24-T 24+2G-port Modular Managed Industrial Ethernet Rackmount Switch

      MOXA IKS-6726A-2GTXSFP-24-24-T 24+2G-port Modul...

      Features and Benefits   2 Gigabit plus 24 Fast Ethernet ports for copper and fiber Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches)  , and STP/RSTP/MSTP for network redundancy  Modular design lets you choose from a variety of media combinations  -40 to 75°C operating temperature range  Supports MXstudio for easy, visualized industrial network management  V-ON™ ensures millisecond-level multicast data and video network ...

      See more products >
    • MOXA MGate MB3180 Modbus TCP Gateway

      MOXA MGate MB3180 Modbus TCP Gateway

      Features and Benefits FeaSupports Auto Device Routing for easy configuration Supports route by TCP port or IP address for flexible deployment Converts between Modbus TCP and Modbus RTU/ASCII protocols 1 Ethernet port and 1, 2, or 4 RS-232/422/485 ports 16 simultaneous TCP masters with up to 32 simultaneous requests per master Easy hardware setup and configurationtures and Benefits ...

      See more products >
    • MOXA MGate 5118 Modbus TCP Gateway

      MOXA MGate 5118 Modbus TCP Gateway

      Introduction   The MGate 5118 industrial protocol gateways support the SAE J1939 protocol, which is based on CAN bus (Controller Area Network). SAE J1939 is used to implement communication and diagnostics among vehicle components, diesel engine generators, and compression engines, and is suitable for the heavy-duty truck industry and backup power systems. It is now common to use an engine control unit (ECU) to control these kinds of devic...

      See more products >
    • MOXA EDR-810-2GSFP Secure Router

      MOXA EDR-810-2GSFP Secure Router

      Features and Benefits MOXA EDR-810-2GSFP is 8 10/100BaseT(X) copper + 2 GbE SFP multiport industrial secure routers   Moxa's EDR Series industrial secure routers protect the control networks of critical facilities while maintaining fast data transmission. They are specifically designed for automation networks and are integrated cybersecurity solutions that combine an industrial firewall, VPN, router, and L2 s...

      See more products >
    • MOXA NPort 5650-8-DT-J Device Server

      MOXA NPort 5650-8-DT-J Device Server

      Introduction   NPort 5600-8-DT device servers can conveniently and transparently connect 8 serial devices to an Ethernet network, allowing you to network your existing serial devices with only basic configuration. You can both centralize management of your serial devices and distribute management hosts over the network. Since the NPort 5600-8-DT device servers have a smaller form factor compared to our 19-inch models, they are a great choice f...

      See more products >
    Hit enter to search or ESC to close