MOXA TSN-G5008-2GTXSFP Full Gigabit Managed Industrial Ethernet Switch
| Standards |
IEEE 802.3 for10BaseTIEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT(X) IEEE 802.3z for 1000BaseX IEEE 802.1Q for VLAN Tagging IEEE 802.1p for Class of Service IEEE 802.1D-2004 for Spanning Tree Protocol IEEE 802.1wfor Rapid Spanning Tree Protocol |
| 10/100/1000BaseT(X) Ports (RJ45 connector) | 6Auto negotiation speed Full/Half duplex mode
Auto MDI/MDI-X connection |
| Combo Ports (10/100/1000BaseT(X) or 100/1000BaseSFP+) | 2Auto negotiation speed Full/Half duplex mode
Auto MDI/MDI-X connection |
| Alarm Contact Channels | 1, Relay output with current carrying capacity of1 A@24 VDC |
| Buttons | Reset button |
| Digital Input Channels | 1 |
| Digital Inputs | +13 to +30 V for state 1 -30 to +3 V for state 0 Max. input current: 8 mA |
| Connection | 2 removable 4-contact terminal block(s) |
| Input Voltage | 12to48 VDC, Redundant dual inputs |
| Operating Voltage | 9.6 to 60 VDC |
| Input Current | 1.72A@12 VDC |
| Overload Current Protection | Supported |
| Reverse Polarity Protection | Supported |
| Housing | Metal |
| IP Rating | IP40 |
| Dimensions | 36x135x115 mm (1.42 x 5.32 x 4.53 in) |
| Weight | 787g(1.74lb) |
| Installation | DIN-rail mounting, Wall mounting (with optional kit) |
| Operating Temperature | -10to 60°C (14to140°F) |
| Storage Temperature (package included) | -40 to 85°C (-40 to185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
Related products
-
MOXA MGate 5103 1-port Modbus RTU/ASCII/TCP/Eth...
Features and Benefits Converts Modbus, or EtherNet/IP to PROFINET Supports PROFINET IO device Supports Modbus RTU/ASCII/TCP master/client and slave/server Supports EtherNet/IP Adapter Effortless configuration via web-based wizard Built-in Ethernet cascading for easy wiring Embedded traffic monitoring/diagnostic information for easy troubleshooting microSD card for configuration backup/duplication and event logs St...
-
MOXA ICF-1180I-S-ST Industrial PROFIBUS-to-fibe...
Features and Benefits Fiber-cable test function validates fiber communication Auto baudrate detection and data speed of up to 12 Mbps PROFIBUS fail-safe prevents corrupted datagrams in functioning segments Fiber inverse feature Warnings and alerts by relay output 2 kV galvanic isolation protection Dual power inputs for redundancy (Reverse power protection) Extends PROFIBUS transmission distance up to 45 km Wide-te...
-
MOXA EDS-305-S-SC 5-port unmanaged Ethernet switch
Introduction The EDS-305 Ethernet switches provide an economical solution for your industrial Ethernet connections. These 5-port switches come with a built-in relay warning function that alerts network engineers when power failures or port breaks occur. In addition, the switches are designed for harsh industrial environments, such as the hazardous locations defined by the Class 1 Div. 2 and ATEX Zone 2 standards. The switches ...
-
MOXA EDS-205 Entry-level Unmanaged Industrial E...
Features and Benefits 10/100BaseT(X) (RJ45 connector) IEEE802.3/802.3u/802.3x support Broadcast storm protection DIN-rail mounting ability -10 to 60°C operating temperature range Specifications Ethernet Interface Standards IEEE 802.3 for10BaseTIEEE 802.3u for 100BaseT(X)IEEE 802.3x for flow control 10/100BaseT(X) Ports ...
-
MOXA EDS-P506E-4PoE-2GTXSFP-T Gigabit POE+ Mana...
Features and Benefits Built-in 4 PoE+ ports support up to 60 W output per portWide-range 12/24/48 VDC power inputs for flexible deployment Smart PoE functions for remote power device diagnosis and failure recovery 2 Gigabit combo ports for high-bandwidth communication Supports MXstudio for easy, visualized industrial network management Specifications ...
-
MOXA EDS-305 5-port unmanaged Ethernet switch
Introduction The EDS-305 Ethernet switches provide an economical solution for your industrial Ethernet connections. These 5-port switches come with a built-in relay warning function that alerts network engineers when power failures or port breaks occur. In addition, the switches are designed for harsh industrial environments, such as the hazardous locations defined by the Class 1 Div. 2 and ATEX Zone 2 standards. The switches ...