MOXA ICF-1150-S-SC-T Serial-to-Fiber Converter
3-way communication: RS-232, RS-422/485, and fiber
Rotary switch to change the pull high/low resistor value
Extends RS-232/422/485 transmission up to 40 km with single-mode or 5 km with multi-mode
-40 to 85°C wide-temperature range models available
C1D2, ATEX, and IECEx certified for harsh industrial environments
Serial Interface
| No. of Ports | 2 |
| Serial Standards | RS-232RS-422RS-485 |
| Baudrate | 50 bps to 921.6 kbps (supports non-standard baudrates) |
| Flow Control | ADDC (automatic data direction control) for RS-485 |
| Connector | DB9 female for RS-232 interface5-pin terminal block for RS-422/485 interfaceFiber ports for RS-232/422/485 interface |
| Isolation | 2 kV (I models) |
Serial Signals
| RS-232 | TxD, RxD, GND |
| RS-422 | Tx+, Tx-, Rx+, Rx-, GND |
| RS-485-4w | Tx+, Tx-, Rx+, Rx-, GND |
| RS-485-2w | Data+, Data-, GND |
Power Parameters
| Input Current | ICF-1150 Series: 264 mA@12to 48 VDC ICF-1150I Series: 300 mA@12to 48 VDC |
| Input Voltage | 12to48 VDC |
| No. of Power Inputs | 1 |
| Overload Current Protection | Supported |
| Power Connector | Terminal block |
| Power Consumption | ICF-1150 Series: 264 mA@12to 48 VDC ICF-1150I Series: 300 mA@12to 48 VDC |
Physical Characteristics
| Housing | Metal |
| IP Rating | IP30 |
| Dimensions | 30.3 x70 x115 mm (1.19x 2.76 x 4.53 in) |
| Weight | 330 g (0.73 lb) |
| Installation | DIN-rail mounting |
Environmental Limits
| Operating Temperature | Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 85°C (-40 to 185°F) |
| Storage Temperature (package included) | -40 to 85°C (-40 to185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
MOXA ICF-1150-S-SC-T Available Models
| Model Name | Isolation | Operating Temp. | Fiber Module Type | IECEx Supported |
| ICF-1150-M-ST | - | 0 to 60°C | Multi-mode ST | - |
| ICF-1150-M-SC | - | 0 to 60°C | Multi-mode SC | - |
| ICF-1150-S-ST | - | 0 to 60°C | Single-mode ST | - |
| ICF-1150-S-SC | - | 0 to 60°C | Single-mode SC | - |
| ICF-1150-M-ST-T | - | -40 to 85°C | Multi-mode ST | - |
| ICF-1150-M-SC-T | - | -40 to 85°C | Multi-mode SC | - |
| ICF-1150-S-ST-T | - | -40 to 85°C | Single-mode ST | - |
| ICF-1150-S-SC-T | - | -40 to 85°C | Single-mode SC | - |
| ICF-1150I-M-ST | 2kV | 0 to 60°C | Multi-mode ST | - |
| ICF-1150I-M-SC | 2kV | 0 to 60°C | Multi-mode SC | - |
| ICF-1150I-S-ST | 2kV | 0 to 60°C | Single-mode ST | - |
| ICF-1150I-S-SC | 2kV | 0 to 60°C | Single-mode SC | - |
| ICF-1150I-M-ST-T | 2kV | -40 to 85°C | Multi-mode ST | - |
| ICF-1150I-M-SC-T | 2kV | -40 to 85°C | Multi-mode SC | - |
| ICF-1150I-S-ST-T | 2kV | -40 to 85°C | Single-mode ST | - |
| ICF-1150I-S-SC-T | 2kV | -40 to 85°C | Single-mode SC | - |
| ICF-1150-M-ST-IEX | - | 0to 60°C | Multi-mode ST | / |
| ICF-1150-M-SC-IEX | - | 0to 60°C | Multi-mode SC | / |
| ICF-1150-S-ST-IEX | - | 0to 60°C | Single-mode ST | / |
| ICF-1150-S-SC-IEX | - | 0to 60°C | Single-mode SC | / |
| ICF-1150-M-ST-T-IEX | - | -40 to 85°C | Multi-mode ST | / |
| ICF-1150-M-SC-T-IEX | - | -40 to 85°C | Multi-mode SC | / |
| ICF-1150-S-ST-T-IEX | - | -40 to 85°C | Single-mode ST | / |
| ICF-1150-S-SC-T-IEX | - | -40 to 85°C | Single-mode SC | / |
| ICF-1150I-M-ST-IEX | 2kV | 0to 60°C | Multi-mode ST | / |
| ICF-1150I-M-SC-IEX | 2kV | 0to 60°C | Multi-mode SC | / |
| ICF-1150I-S-ST-IEX | 2kV | 0to 60°C | Single-mode ST | / |
| ICF-1150I-S-SC-IEX | 2kV | 0to 60°C | Single-mode SC | / |
| ICF-1150I-M-ST-T-IEX | 2kV | -40 to 85°C | Multi-mode ST | / |
| ICF-1150I-M-SC-T-IEX | 2kV | -40 to 85°C | Multi-mode SC | / |
| ICF-1150I-S-ST-T-IEX | 2kV | -40 to 85°C | Single-mode ST | / |
| ICF-1150I-S-SC-T-IEX | 2kV | -40 to 85°C | Single-mode SC | / |
Related products
-
MOXA NPort 5650I-8-DT Device Server
Introduction MOXA NPort 5600-8-DTL device servers can conveniently and transparently connect 8 serial devices to an Ethernet network, allowing you to network your existing serial devices with basic configurations. You can both centralize management of your serial devices and distribute management hosts over the network. The NPort® 5600-8-DTL device servers have a smaller form factor than our 19-inch models, making them a great choice fo...
-
MOXA EDS-316 16-port unmanaged Ethernet switch
Introduction The EDS-316 Ethernet switches provide an economical solution for your industrial Ethernet connections. These 16-port switches come with a built-in relay warning function that alerts network engineers when power failures or port breaks occur. In addition, the switches are designed for harsh industrial environments, such as the hazardous locations defined by the Class 1 Div. 2 and ATEX Zone 2 standards....
-
MOXA UPort1650-16 USB to 16-port RS-232/422/485...
Features and Benefits Hi-Speed USB 2.0 for up to 480 Mbps USB data transmission rates 921.6 kbps maximum baudrate for fast data transmission Real COM and TTY drivers for Windows, Linux, and macOS Mini-DB9-female-to-terminal-block adapter for easy wiring LEDs for indicating USB and TxD/RxD activity 2 kV isolation protection (for “V' models) Specifications ...
-
MOXA EDS-308 Unmanaged Industrial Ethernet Switch
Features and Benefits Relay output warning for power failure and port break alarm Broadcast storm protection -40 to 75°C operating temperature range (-T models) Specifications Ethernet Interface 10/100BaseT(X) Ports (RJ45 connector) EDS-308/308-T: 8EDS-308-M-SC/308-M-SC-T/308-S-SC/308-S-SC-T/308-S-SC-80:7 EDS-308-MM-SC/30...
-
MOXA NPort 5232 2-port RS-422/485 Industrial Ge...
Features and Benefits Compact design for easy installation Socket modes: TCP server, TCP client, UDP Easy-to-use Windows utility for configuring multiple device servers ADDC (Automatic Data Direction Control) for 2-wire and 4-wire RS-485 SNMP MIB-II for network management Specifications Ethernet Interface 10/100BaseT(X) Ports (RJ45 connect...
-
MOXA EDS-P506E-4PoE-2GTXSFP Gigabit POE+ Manage...
Features and Benefits Built-in 4 PoE+ ports support up to 60 W output per portWide-range 12/24/48 VDC power inputs for flexible deployment Smart PoE functions for remote power device diagnosis and failure recovery 2 Gigabit combo ports for high-bandwidth communication Supports MXstudio for easy, visualized industrial network management Specifications ...