English
  • head_banner_01

MOXA NPort 5650I-8-DT Device Server

  • MOXA NPort 5650I-8-DT Device Server
  • MOXA NPort 5650I-8-DT Device Server
  • MOXA NPort 5650I-8-DT Device Server
  • MOXA NPort 5650I-8-DT Device Server
  • MOXA NPort 5650I-8-DT Device Server
  • MOXA NPort 5650I-8-DT Device Server
  • MOXA NPort 5650I-8-DT Device Server

Short Description:

MOXA NPort 5650I-8-DT is NPort 5600-DT Series

8-port RS-232/422/485 desktop device server with DB9 male connectors, 48 VDC power input, and 2 kV optical isolation


Product Detail

Product Tags

Introduction

 

MOXA NPort 5600-8-DTL device servers can conveniently and transparently connect 8 serial devices to an Ethernet network, allowing you to network your existing serial devices with basic configurations. You can both centralize management of your serial devices and distribute management hosts over the network. The NPort® 5600-8-DTL device servers have a smaller form factor than our 19-inch models, making them a great choice for applications that need additional serial ports when mounting rails are not available. Convenient Design for RS-485 Applications The NPort 5650-8-DTL device servers support selectable 1 kilo-ohm and 150 kilo-ohms pull high/low resistors and a 120-ohm terminator. In some critical environments, termination resistors may be needed to prevent the reflection of serial signals. When using termination resistors, it is also important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible with all environments, NPort® 5600-8-DTL device servers use DIP switches to allow users to adjust termination and pull high/low resistor values manually for each serial port.

Datasheet

 

Physical Characteristics

Housing

Metal

Installation

Desktop

DIN-rail mounting (with optional kit) Wall mounting (with optional kit)

Dimensions (with ears)

229 x 46 x 125 mm (9.01 x 1.81 x 4.92 in)

Dimensions (without ears)

197 x 44 x 125 mm (7.76 x 1.73 x 4.92 in)

Dimensions (with DIN-rail kit on bottom panel)

197 x 53 x 125 mm (7.76 x 2.09 x 4.92 in)

Weight

NPort 5610-8-DT: 1,570 g (3.46 lb)

NPort 5610-8-DT-J: 1,520 g (3.35 lb) NPort 5610-8-DT-T: 1,320 g (2.91 lb) NPort 5650-8-DT: 1,590 g (3.51 lb)

NPort 5650-8-DT-J: 1,540 g (3.40 lb)  NPort 5650-8-DT-T: 1,340 g (2.95 lb)  NPort 5650I-8-DT: 1,660 g (3.66 lb)     NPort 5650I-8-DT-T: 1,410 g (3.11 lb)

Interactive Interface

LCD panel display (standard temp. models only)

Push buttons for configuration (standard temp. models only)

Environmental Limits

Operating Temperature

Standard Models: 0 to 55°C (32 to 140°F)

Wide Temp. Models: -40 to 75°C (-40 to 167°F)

Storage Temperature (package included)

-40 to 75°C (-40 to 167°F)

Ambient Relative Humidity

5 to 95% (non-condensing)

MOXA NPort 5650I-8-DT Related models

Model Name

Serial Interface

Serial Interface Connector

Serial Interface Isolation

Operating Temp.

Power Adapter

Included in

Package

Input Voltage

NPort 5610-8-DT

RS-232

DB9

–

0 to 55°C

Yes

12 to 48 VDC

NPort 5610-8-DT-T

RS-232

DB9

–

-40 to 75°C

No

12 to 48 VDC

NPort 5610-8-DT-J

RS-232

8-pin RJ45

–

0 to 55°C

Yes

12 to 48 VDC

NPort 5650-8-DT

RS-232/422/485

DB9

–

0 to 55°C

Yes

12 to 48 VDC

NPort 5650-8-DT-T

RS-232/422/485

DB9

–

-40 to 75°C

No

12 to 48 VDC

NPort 5650-8-DT-J

RS-232/422/485

8-pin RJ45

–

0 to 55°C

Yes

12 to 48 VDC

NPort 5650I-8-DT

RS-232/422/485

DB9

2 kV

0 to 55°C

Yes

12 to 48 VDC

NPort 5650I-8-DT-T

RS-232/422/485

DB9

2 kV

-40 to 75°C

No

12 to 48 VDC
  • Previous:
  • Next:
    • Write your message here and send it to us

    Related products

    • MOXA EDS-408A-PN Managed Industrial Ethernet Switch

      MOXA EDS-408A-PN Managed Industrial Ethernet Sw...

      Features and Benefits Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and RSTP/STP for network redundancy IGMP Snooping, QoS, IEEE 802.1Q VLAN, and port-based VLAN supported Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01 PROFINET or EtherNet/IP enabled by default (PN or EIP models) Supports MXstudio for easy, visualized industrial network mana...

      See more products >
    • MOXA ioLogik E2210 Universal Controller Smart Ethernet Remote I/O

      MOXA ioLogik E2210 Universal Controller Smart E...

      Features and Benefits Front-end intelligence with Click&Go control logic, up to 24 rules Active communication with MX-AOPC UA Server Saves time and wiring costs with peer-to-peer communications Supports SNMP v1/v2c/v3 Friendly configuration via web browser Simplifies I/O management with MXIO library for Windows or Linux Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments ...

      See more products >
    • MOXA IKS-6726A-2GTXSFP-HV-HV-T Managed Industrial Ethernet Rackmount Switch

      MOXA IKS-6726A-2GTXSFP-HV-HV-T Managed Industri...

      Features and Benefits   2 Gigabit plus 24 Fast Ethernet ports for copper and fiber Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches)  , and STP/RSTP/MSTP for network redundancy  Modular design lets you choose from a variety of media combinations  -40 to 75°C operating temperature range  Supports MXstudio for easy, visualized industrial network management  V-ON™ ensures millisecond-level multicast data and video network ...

      See more products >
    • MOXA MGate MB3170I Modbus TCP Gateway

      MOXA MGate MB3170I Modbus TCP Gateway

      Features and Benefits Supports Auto Device Routing for easy configuration Supports route by TCP port or IP address for flexible deployment Connects up to 32 Modbus TCP servers Connects up to 31 or 62 Modbus RTU/ASCII slaves Accessed by up to 32 Modbus TCP clients (retains 32 Modbus requests for each Master) Supports Modbus serial master to Modbus serial slave communications Built-in Ethernet cascading for easy wir...

      See more products >
    • MOXA ioLogik E1260 Universal Controllers Ethernet Remote I/O

      MOXA ioLogik E1260 Universal Controllers Ethern...

      Features and Benefits User-definable Modbus TCP Slave addressing Supports RESTful API for IIoT applications Supports EtherNet/IP Adapter 2-port Ethernet switch for daisy-chain topologies Saves time and wiring costs with peer-to-peer communications Active communication with MX-AOPC UA Server Supports SNMP v1/v2c Easy mass deployment and configuration with ioSearch utility Friendly configuration via web browser Simp...

      See more products >
    • MOXA CP-104EL-A-DB9M RS-232 low-profile PCI Express board

      MOXA CP-104EL-A-DB9M RS-232 low-profile PCI Ex...

      Introduction   The CP-104EL-A is a smart, 4-port PCI Express board designed for POS and ATM applications. It is a top choice of industrial automation engineers and system integrators, and supports many different operating systems, including Windows, Linux, and even UNIX. In addition, each of the board’s 4 RS-232 serial ports supports a fast 921.6 kbps baudrate. The CP-104EL-A provides full modem control signals to ensure compatibility wit...

      See more products >
    Hit enter to search or ESC to close