• head_banner_01

MOXA SFP-1GLXLC 1-port Gigabit Ethernet SFP Module

Short Description:

The SFP-1G Series 1-port Gigabit Ethernet SFP modules are available as optional accessories for a wide range of Moxa Ethernet switches.


Product Detail

Product Tags

Features and Benefits

Digital Diagnostic Monitor Function
-40 to 85°C operating temperature range (T models)
IEEE 802.3z compliant
Differential LVPECL inputs and outputs
TTL signal detect indicator
Hot pluggable LC duplex connector
Class 1 laser product, complies with EN 60825-1

Power Parameters

Power Consumption Max. 1 W

Environmental Limits

Operating Temperature Standard Models: 0 to 60°C (32 to 140°F)Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Storage Temperature (package included) -40 to 85°C (-40 to185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)

Standards and Certifications

Safety CEFCCEN 60825-1UL60950-1
Maritime DNVGL

Warranty

 

Warranty Period 5 years
Warranty Period 5 years

Package Contents

Device 1 x SFP-1G Series module
Documentation 1 x warranty card

MOXA SFP-1G Series Available Models

Model Name TransceiverType Typical Distance Operating Temp.
SFP-1GSXLC Multi-mode 300 m/550 m 0 to 60°C
SFP-1GSXLC-T Multi-mode 300 m/550 m -40 to 85°C
SFP-1GLSXLC Multi-mode 1 km/2 km 0 to 60°C
SFP-1GLSXLC-T Multi-mode 1 km/2 km -40 to 85°C
SFP-1G10ALC Single-mode 10 km 0 to 60°C
SFP-1G10ALC-T Single-mode 10 km -40 to 85°C
SFP-1G10BLC Single-mode 10 km 0 to 60°C
SFP-1G10BLC-T Single-mode 10 km -40 to 85°C
SFP-1GLXLC Single-mode 10 km 0 to 60°C
SFP-1GLXLC-T Single-mode 10 km -40 to 85°C
SFP-1G20ALC Single-mode 20 km 0 to 60°C
SFP-1G20ALC-T Single-mode 20 km -40 to 85°C
SFP-1G20BLC Single-mode 20 km 0 to 60°C
SFP-1G20BLC-T Single-mode 20 km -40 to 85°C
SFP-1GLHLC Single-mode 30 km 0 to 60°C
SFP-1GLHLC-T Single-mode 30 km -40 to 85°C
SFP-1G40ALC Single-mode 40 km 0 to 60°C
SFP-1G40ALC-T Single-mode 40 km -40 to 85°C
SFP-1G40BLC Single-mode 40 km 0 to 60°C
SFP-1G40BLC-T Single-mode 40 km -40 to 85°C
SFP-1GLHXLC Single-mode 40 km 0 to 60°C
SFP-1GLHXLC-T Single-mode 40 km -40 to 85°C
SFP-1GZXLC Single-mode 80 km 0 to 60°C
SFP-1GZXLC-T Single-mode 80 km -40 to 85°C

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • MOXA EDS-408A – MM-SC Layer 2 Managed Industrial Ethernet Switch

      MOXA EDS-408A – MM-SC Layer 2 Managed Ind...

      Features and Benefits Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and RSTP/STP for network redundancy IGMP Snooping, QoS, IEEE 802.1Q VLAN, and port-based VLAN supported Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01 PROFINET or EtherNet/IP enabled by default (PN or EIP models) Supports MXstudio for easy, visualized industrial network mana...

    • MOXA NPort 5110 Industrial General Device Server

      MOXA NPort 5110 Industrial General Device Server

      Features and Benefits Small size for easy installation  Real COM and TTY drivers for Windows, Linux, and macOS  Standard TCP/IP interface and versatile operation modes  Easy-to-use Windows utility for configuring multiple device servers  SNMP MIB-II for network management  Configure by Telnet, web browser, or Windows utility  Adjustable pull high/low resistor for RS-485 ports ...

    • MOXA EDS-G205-1GTXSFP-T 5-port Full Gigabit Unmanaged POE Industrial Ethernet Switch

      MOXA EDS-G205-1GTXSFP-T 5-port Full Gigabit Unm...

      Features and Benefits Full Gigabit Ethernet portsIEEE 802.3af/at, PoE+ standards Up to 36 W output per PoE port 12/24/48 VDC redundant power inputs Supports 9.6 KB jumbo frames Intelligent power consumption detection and classification Smart PoE overcurrent and short-circuit protection -40 to 75°C operating temperature range (-T models) Specifications ...

    • MOXA MGate 5118 Modbus TCP Gateway

      MOXA MGate 5118 Modbus TCP Gateway

      Introduction   The MGate 5118 industrial protocol gateways support the SAE J1939 protocol, which is based on CAN bus (Controller Area Network). SAE J1939 is used to implement communication and diagnostics among vehicle components, diesel engine generators, and compression engines, and is suitable for the heavy-duty truck industry and backup power systems. It is now common to use an engine control unit (ECU) to control these kinds of devic...

    • MOXA NPort 5230 Industrial General Serial Device

      MOXA NPort 5230 Industrial General Serial Device

      Features and Benefits Compact design for easy installation  Socket modes: TCP server, TCP client, UDP  Easy-to-use Windows utility for configuring multiple device servers  ADDC (Automatic Data Direction Control) for 2-wire and 4-wire RS-485  SNMP MIB-II for network management Specifications   Ethernet Interface 10/100BaseT(X) Ports (RJ45 connect...

    • MOXA UPort1650-8 USB to 16-port RS-232/422/485 Serial Hub Converter

      MOXA UPort1650-8 USB to 16-port RS-232/422/485 ...

      Features and Benefits Hi-Speed USB 2.0 for up to 480 Mbps USB data transmission rates 921.6 kbps maximum baudrate for fast data transmission Real COM and TTY drivers for Windows, Linux, and macOS Mini-DB9-female-to-terminal-block adapter for easy wiring LEDs for indicating USB and TxD/RxD activity 2 kV isolation protection (for “V' models) Specifications ...