MOXA EDS-505A 5-port Managed Industrial Ethernet Switch
- Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and STP/RSTP/MSTP for network redundancy
TACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network security
Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01
Supports MXstudio for easy, visualized industrial network management
Input/Output Interface
| Alarm Contact Channels | 2, Relay output with current carrying capacity of 1 A @ 24 VDC |
| Digital Input Channels | 2 |
| Digital Inputs | +13 to +30 V for state 1 -30 to +3 V for state 0 Max. input current: 8 mA |
| Buttons | Reset button |
Ethernet Interface
| 10/100BaseT(X) Ports (RJ45 connector) | EDS-505A/505A-T: 5EDS-505A-MM-SC/MM-ST/SS-SC Series: 3All models support:
Auto negotiation speed Full/Half duplex mode Auto MDI/MDI-X connection |
| 100BaseFX Ports (multi-mode SC connector) | EDS-505A-MM-SC Series: 2 |
| 100BaseFX Ports (multi-mode ST connector) | EDS-505A-MM-ST Series: 2 |
| 100BaseFX Ports (single-mode SC connector) | EDS-505A-SS-SC Series: 2 |
| Standars |
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX IEEE 802.1X for authentication IEEE 802.1D-2004 for Spanning Tree Protocol IEEE 802.1w for Rapid Spanning Tree Protocol IEEE 802.1s for Multiple Spanning Tree Protocol IEEE 802.1Q for VLAN Tagging IEEE 802.1p for Class of Service IEEE 802.3x for flow control IEEE 802.3ad for Port Trunk with LACP |
Power Parameters
| Connection | 2 removable 6-contact terminal block(s) |
| Input Voltage | 12/24/48 VDC, Redundantdual inputs |
| Operating Voltage | 9.6 to 60 VDC |
| Input Current | EDS-505A/EDS-505A-T: 0.21 A@24 VDC EDS-505A-MM-SC/MM-ST/SS-SC Series: 0.29 A@24 VDC |
| Overload Current Protection | Supported |
| Reverse Polarity Protection | Supported |
Physical Characteristics
| Housing | Metal |
| IP Rating | IP30 |
| Dimensions | 80.2 x135x105 mm (3.16 x 5.31 x 4.13 in) |
| Weight | 1040g(2.3lb) |
| Installation | DIN-rail mounting, Wall mounting (with optional kit) |
Environmental Limits
| Operating Temperature | Standard Models: -10 to 60°C (14to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Storage Temperature (package included) | -40 to 85°C (-40 to185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
MOXA EDS-505A Available Models
| Model 1 | MOXA EDS-505A |
| Model 2 | MOXA EDS-505A-MM-SC |
| Model 3 | MOXA EDS-505A-MM-ST |
| Model 4 | MOXA EDS-505A-SS-SC |
| Model 5 | MOXA EDS-505A-MM-SC-T |
| Model 6 | MOXA EDS-505A-MM-ST-T |
| Model 7 | MOXA EDS-505A-SS-SC-T |
| Model 8 | MOXA EDS-505A-T |
Related products
-
MOXA NPort 5130 Industrial General Device Server
Features and Benefits Small size for easy installation Real COM and TTY drivers for Windows, Linux, and macOS Standard TCP/IP interface and versatile operation modes Easy-to-use Windows utility for configuring multiple device servers SNMP MIB-II for network management Configure by Telnet, web browser, or Windows utility Adjustable pull high/low resistor for RS-485 ports ...
-
MOXA NAT-102 Secure Router
Introduction The NAT-102 Series is an industrial NAT device that is designed to simplify the IP configuration of machines in existing network infrastructure in factory automation environments. The NAT-102 Series provides complete NAT functionality to adapt your machines to specific network scenarios without complicated, costly, and time-consuming configurations. These devices also protect the internal network from unauthorized access by outsi...
-
MOXA EDS-316-MM-SC 16-port Unmanaged Industrial...
Features and Benefits Relay output warning for power failure and port break alarm Broadcast storm protection -40 to 75°C operating temperature range (-T models) Specifications Ethernet Interface 10/100BaseT(X) Ports (RJ45 connector) EDS-316 Series: 16 EDS-316-MM-SC/MM-ST/MS-SC/SS-SC Series, EDS-316-SS-SC-80: 14 EDS-316-M-...
-
MOXA MGate 5119-T Modbus TCP Gateway
Introduction The MGate 5119 is an industrial Ethernet gateway with 2 Ethernet ports and 1 RS-232/422/485 serial port. To integrate Modbus, IEC 60870-5-101, and IEC 60870-5-104 devices with an IEC 61850 MMS network, use the MGate 5119 as a Modbus master/client, IEC 60870-5-101/104 master, and DNP3 serial/TCP master to collect and exchange data with IEC 61850 MMS systems. Easy Configuration via SCL Generator The MGate 5119 as an IEC 61850...
-
MOXA EDS-408A-SS-SC-T Layer 2 Managed Industria...
Features and Benefits Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and RSTP/STP for network redundancy IGMP Snooping, QoS, IEEE 802.1Q VLAN, and port-based VLAN supported Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01 PROFINET or EtherNet/IP enabled by default (PN or EIP models) Supports MXstudio for easy, visualized industrial network mana...
-
MOXA EDS-205 Entry-level Unmanaged Industrial E...
Features and Benefits 10/100BaseT(X) (RJ45 connector) IEEE802.3/802.3u/802.3x support Broadcast storm protection DIN-rail mounting ability -10 to 60°C operating temperature range Specifications Ethernet Interface Standards IEEE 802.3 for10BaseTIEEE 802.3u for 100BaseT(X)IEEE 802.3x for flow control 10/100BaseT(X) Ports ...