MOXA MGate 5119-T Modbus TCP Gateway
Supports IEC 61850 MMS server
Supports DNP3 serial/TCP master
Supports IEC 60870-5-101 master (balanced/unbalanced)
Supports IEC 60870-5-104 client
Supports Modbus RTU/ASCII/TCP master/client
Embedded traffic monitoring/diagnostic information for easy troubleshooting
Built-in Ethernet cascading for easy wiring
-40 to 75°C operating temperature range
Serial port with 2 kV isolation protection
Supports IEC 61850 MMS and DNP3 TCP protocol encryption
Security features based on IEC 62443/NERC CIP
Compliant with IEC 61850-3 and IEEE 1613
Built-in SCL file generator for easy configuration
Related products
-
MOXA MGate 5118 Modbus TCP Gateway
Introduction The MGate 5118 industrial protocol gateways support the SAE J1939 protocol, which is based on CAN bus (Controller Area Network). SAE J1939 is used to implement communication and diagnostics among vehicle components, diesel engine generators, and compression engines, and is suitable for the heavy-duty truck industry and backup power systems. It is now common to use an engine control unit (ECU) to control these kinds of devic...
-
MOXA EDS-405A-SS-SC-T Entry-level Managed Indus...
Features and Benefits Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and RSTP/STP for network redundancy IGMP Snooping, QoS, IEEE 802.1Q VLAN, and port-based VLAN supported Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01 PROFINET or EtherNet/IP enabled by default (PN or EIP models) Supports MXstudio for easy, visualized industrial net...
-
MOXA EDS-405A Entry-level Managed Industrial Et...
Features and Benefits Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and RSTP/STP for network redundancy IGMP Snooping, QoS, IEEE 802.1Q VLAN, and port-based VLAN supported Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01 PROFINET or EtherNet/IP enabled by default (PN or EIP models) Supports MXstudio for easy, visualized industrial net...
-
MOXA ICF-1150I-M-ST Serial-to-Fiber Converter
Features and Benefits 3-way communication: RS-232, RS-422/485, and fiber Rotary switch to change the pull high/low resistor value Extends RS-232/422/485 transmission up to 40 km with single-mode or 5 km with multi-mode -40 to 85°C wide-temperature range models available C1D2, ATEX, and IECEx certified for harsh industrial environments Specifications ...
-
MOXA EDS-208A 8-port Compact Unmanaged Industri...
Features and Benefits 10/100BaseT(X) (RJ45 connector), 100BaseFX (multi/single-mode, SC or ST connector) Redundant dual 12/24/48 VDC power inputs IP30 aluminum housing Rugged hardware design well suited for hazardous locations (Class 1 Div. 2/ATEX Zone 2), transportation (NEMA TS2/EN 50121-4/e-Mark), and maritime environments (DNV/GL/LR/ABS/NK) -40 to 75°C operating temperature range (-T models) ...
-
MOXA NAT-102 Secure Router
Introduction The NAT-102 Series is an industrial NAT device that is designed to simplify the IP configuration of machines in existing network infrastructure in factory automation environments. The NAT-102 Series provides complete NAT functionality to adapt your machines to specific network scenarios without complicated, costly, and time-consuming configurations. These devices also protect the internal network from unauthorized access by outsi...