• head_banner_01

MOXA ioLogik E2240 Universal Controller Smart Ethernet Remote I/O

Short Description:

Moxa’s ioLogik E2200 Series Ethernet Remote I/O is a PC-based data acquisition and control device that uses proactive, event-based reporting to control I/O devices and features the Click&Go programming interface. Unlike traditional PLCs, which are passive and must poll for data, Moxa’s ioLogik E2200 Series will, when paired with our MX-AOPC UA Server, communicate with SCADA systems using active messaging that is pushed to the server only when state changes or configured events occur. Additionally, the ioLogik E2200 features SNMP for communications and control using an NMS (Network Management System), allowing IT professionals to configure the device to push I/O status reports according to configured specifications. This report-by-exception approach, which is new to PC-based monitoring, requires far less bandwidth than traditional polling methods.


Product Detail

Product Tags

Features and Benefits

Front-end intelligence with Click&Go control logic, up to 24 rules
Active communication with MX-AOPC UA Server
Saves time and wiring costs with peer-to-peer communications
Supports SNMP v1/v2c/v3
Friendly configuration via web browser
Simplifies I/O management with MXIO library for Windows or Linux
Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments

Specifications

Control Logic

Language Click&Go

Input/Output Interface

Digital Input Channels ioLogikE2210Series: 12 ioLogikE2212Series:8 ioLogikE2214Series:6
Digital Output Channels ioLogik E2210/E2212 Series: 8ioLogik E2260/E2262 Series: 4
Configurable DIO Channels (by software) ioLogik E2212 Series: 4ioLogik E2242 Series: 12
Relay Channels ioLogikE2214Series:6
Analog Input Channels ioLogik E2240 Series: 8ioLogik E2242 Series: 4
Analog Output Channels ioLogik E2240 Series: 2
RTD Channels ioLogik E2260 Series: 6
Thermocouple Channels ioLogik E2262 Series: 8
Buttons Reset button
Rotary Switch 0to9
Isolation 3kVDC or2kVrms

Digital Inputs

Connector Screw-fastened Euroblock terminal
Sensor Type ioLogik E2210 Series: Dry Contact and Wet Contact (NPN)ioLogik E2212/E2214/E2242 Series: Dry Contact and Wet Contact (NPN or PNP)
I/O Mode DI or event counter
Dry Contact On: short to GNDOff: open
Wet Contact (DI to GND) On: 0 to 3 VDC Off: 10 to 30 VDC
Counter Frequency 900 Hz
Digital Filtering Time Interval Software configurable
Points per COM ioLogik E2210 Series: 12 channels ioLogik E2212/E2242 Series: 6 channels ioLogik E2214 Series: 3 channels

Power Parameters

Power Connector Screw-fastened Euroblock terminal
No. of Power Inputs 1
Input Voltage 12to36 VDC
Power Consumption ioLogik E2210 Series: 202 mA @ 24 VDC ioLogik E2212 Series: 136 mA@ 24 VDC ioLogik E2214Series: 170 mA@ 24 VDC ioLogik E2240 Series: 198 mA@ 24 VDC ioLogik E2242 Series: 178 mA@ 24 VDC ioLogik E2260 Series: 95 mA @ 24 VDC ioLogik E2262 Series: 160 mA @ 24 VDC

Physical Characteristics

Dimensions 115x79x 45.6 mm (4.53 x3.11 x1.80 in)
Weight 250 g (0.55 lb)
Installation DIN-rail mounting, Wall mounting
Wiring I/O cable, 16to 26AWG Power cable, 16to26 AWG
Housing Plastic

Environmental Limits

Operating Temperature Standard Models: -10 to 60°C (14to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature (package included) -40 to 85°C (-40 to185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Altitude 2000 m

MOXA ioLogik E2240 Available Models

Model Name Input/Output Interface Digital Input Sensor Type Analog Input Range Operating Temp.
ioLogikE2210 12xDI,8xDO Wet Contact (NPN), Dry Contact - -10 to 60°C
ioLogikE2210-T 12xDI,8xDO Wet Contact (NPN), Dry Contact - -40 to 75°C
ioLogik E2212 8xDI,4xDIO,8xDO Wet Contact (NPN or PNP), Dry Contact - -10 to 60°C
ioLogikE2212-T 8 x DI, 4 x DIO, 8 x DO Wet Contact (NPN or PNP), Dry Contact - -40 to 75°C
ioLogikE2214 6x DI, 6x Relay Wet Contact (NPN or PNP), Dry Contact - -10 to 60°C
ioLogikE2214-T 6x DI, 6x Relay Wet Contact (NPN or PNP), Dry Contact - -40 to 75°C
ioLogik E2240 8xAI, 2xAO - ±150 mV, ±500 mV, ±5 V, ±10 V, 0-20 mA, 4-20 mA -10 to 60°C
ioLogik E2240-T 8xAI,2xAO - ±150 mV, ±500 mV, ±5 V, ±10 V, 0-20 mA, 4-20 mA -40 to 75°C
ioLogik E2242 12xDIO,4xAI Wet Contact (NPN or PNP), Dry Contact ±150 mV, 0-150 mV, ±500 mV, 0-500 mV, ±5 V, 0-5 V, ±10 V, 0-10 V, 0-20 mA, 4-20 mA -10 to 60°C
ioLogik E2242-T 12xDIO,4xAI Wet Contact (NPN or PNP), Dry Contact ±150 mV, 0-150 mV, ±500 mV, 0-500 mV, ±5 V, 0-5 V, ±10 V, 0-10 V, 0-20 mA, 4-20 mA -40 to 75°C
ioLogik E2260 4 x DO, 6 x RTD - - -10 to 60°C
ioLogik E2260-T 4 x DO, 6 x RTD - - -40 to 75°C
ioLogik E2262 4xDO,8xTC - - -10 to 60°C
ioLogik E2262-T 4xDO,8xTC - - -40 to 75°C

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • MOXA MDS-G4028 Managed Industrial Ethernet Switch

      MOXA MDS-G4028 Managed Industrial Ethernet Switch

      Features and Benefits Multiple interface type 4-port modules for greater versatility Tool-free design for effortlessly adding or replacing modules without shutting down the switch Ultra-compact size and multiple mounting options for flexible installation Passive backplane to minimize maintenance efforts Rugged die-cast design for use in harsh environments Intuitive, HTML5-based web interface for a seamless experie...

    • MOXA NPort 5450 Industrial General Serial Device Server

      MOXA NPort 5450 Industrial General Serial Devic...

      Features and Benefits User-friendly LCD panel for easy installation Adjustable termination and pull high/low resistors Socket modes: TCP server, TCP client, UDP Configure by Telnet, web browser, or Windows utility SNMP MIB-II for network management 2 kV isolation protection for NPort 5430I/5450I/5450I-T -40 to 75°C operating temperature range (-T model) Speci...

    • MOXA NPort 5230 Industrial General Serial Device

      MOXA NPort 5230 Industrial General Serial Device

      Features and Benefits Compact design for easy installation  Socket modes: TCP server, TCP client, UDP  Easy-to-use Windows utility for configuring multiple device servers  ADDC (Automatic Data Direction Control) for 2-wire and 4-wire RS-485  SNMP MIB-II for network management Specifications   Ethernet Interface 10/100BaseT(X) Ports (RJ45 connect...

    • MOXA EDS-510E-3GTXSFP-T Layer 2 Managed Industrial Ethernet Switch

      MOXA EDS-510E-3GTXSFP-T Layer 2 Managed Industr...

      Features and Benefits 3 Gigabit Ethernet ports for redundant ring or uplink solutionsTurbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), STP/STP, and MSTP for network redundancyRADIUS, TACACS+, SNMPv3, IEEE 802.1x, HTTPS, SSH, and sticky MAC address to enhance network security Security features based on IEC 62443 EtherNet/IP, PROFINET, and Modbus TCP protocols supported for device management and...

    • MOXA EDS-G509 Managed Switch

      MOXA EDS-G509 Managed Switch

      Introduction The EDS-G509 Series is equipped with 9 Gigabit Ethernet ports and up to 5 fiber-optic ports, making it ideal for upgrading an existing network to Gigabit speed or building a new full Gigabit backbone. Gigabit transmission increases bandwidth for higher performance and transfers large amounts of video, voice, and data across a network quickly. Redundant Ethernet technologies Turbo Ring, Turbo Chain, RSTP/STP, and M...

    • MOXA EDS-516A-MM-SC 16-port Managed Industrial Ethernet Switch

      MOXA EDS-516A-MM-SC 16-port Managed Industrial ...

      Features and Benefits Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and STP/RSTP/MSTP for network redundancyTACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network security Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01 Supports MXstudio for easy, visualized industrial network management ...