MOXA ICF-1150I-M-SC Serial-to-Fiber Converter
3-way communication: RS-232, RS-422/485, and fiber
Rotary switch to change the pull high/low resistor value
Extends RS-232/422/485 transmission up to 40 km with single-mode or 5 km with multi-mode
-40 to 85°C wide-temperature range models available
C1D2, ATEX, and IECEx certified for harsh industrial environments
Serial Interface
| No. of Ports | 2 |
| Serial Standards | RS-232RS-422RS-485 |
| Baudrate | 50 bps to 921.6 kbps (supports non-standard baudrates) |
| Flow Control | ADDC (automatic data direction control) for RS-485 |
| Connector | DB9 female for RS-232 interface5-pin terminal block for RS-422/485 interfaceFiber ports for RS-232/422/485 interface |
| Isolation | 2 kV (I models) |
Serial Signals
| RS-232 | TxD, RxD, GND |
| RS-422 | Tx+, Tx-, Rx+, Rx-, GND |
| RS-485-4w | Tx+, Tx-, Rx+, Rx-, GND |
| RS-485-2w | Data+, Data-, GND |
Power Parameters
| Input Current | ICF-1150 Series: 264 mA@12to 48 VDC ICF-1150I Series: 300 mA@12to 48 VDC |
| Input Voltage | 12to48 VDC |
| No. of Power Inputs | 1 |
| Overload Current Protection | Supported |
| Power Connector | Terminal block |
| Power Consumption | ICF-1150 Series: 264 mA@12to 48 VDC ICF-1150I Series: 300 mA@12to 48 VDC |
Physical Characteristics
| Housing | Metal |
| IP Rating | IP30 |
| Dimensions | 30.3 x70 x115 mm (1.19x 2.76 x 4.53 in) |
| Weight | 330 g (0.73 lb) |
| Installation | DIN-rail mounting |
Environmental Limits
| Operating Temperature | Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 85°C (-40 to 185°F) |
| Storage Temperature (package included) | -40 to 85°C (-40 to185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
MOXA ICF-1150I-M-SC Available Models
| Model Name | Isolation | Operating Temp. | Fiber Module Type | IECEx Supported |
| ICF-1150-M-ST | - | 0 to 60°C | Multi-mode ST | - |
| ICF-1150-M-SC | - | 0 to 60°C | Multi-mode SC | - |
| ICF-1150-S-ST | - | 0 to 60°C | Single-mode ST | - |
| ICF-1150-S-SC | - | 0 to 60°C | Single-mode SC | - |
| ICF-1150-M-ST-T | - | -40 to 85°C | Multi-mode ST | - |
| ICF-1150-M-SC-T | - | -40 to 85°C | Multi-mode SC | - |
| ICF-1150-S-ST-T | - | -40 to 85°C | Single-mode ST | - |
| ICF-1150-S-SC-T | - | -40 to 85°C | Single-mode SC | - |
| ICF-1150I-M-ST | 2kV | 0 to 60°C | Multi-mode ST | - |
| ICF-1150I-M-SC | 2kV | 0 to 60°C | Multi-mode SC | - |
| ICF-1150I-S-ST | 2kV | 0 to 60°C | Single-mode ST | - |
| ICF-1150I-S-SC | 2kV | 0 to 60°C | Single-mode SC | - |
| ICF-1150I-M-ST-T | 2kV | -40 to 85°C | Multi-mode ST | - |
| ICF-1150I-M-SC-T | 2kV | -40 to 85°C | Multi-mode SC | - |
| ICF-1150I-S-ST-T | 2kV | -40 to 85°C | Single-mode ST | - |
| ICF-1150I-S-SC-T | 2kV | -40 to 85°C | Single-mode SC | - |
| ICF-1150-M-ST-IEX | - | 0to 60°C | Multi-mode ST | / |
| ICF-1150-M-SC-IEX | - | 0to 60°C | Multi-mode SC | / |
| ICF-1150-S-ST-IEX | - | 0to 60°C | Single-mode ST | / |
| ICF-1150-S-SC-IEX | - | 0to 60°C | Single-mode SC | / |
| ICF-1150-M-ST-T-IEX | - | -40 to 85°C | Multi-mode ST | / |
| ICF-1150-M-SC-T-IEX | - | -40 to 85°C | Multi-mode SC | / |
| ICF-1150-S-ST-T-IEX | - | -40 to 85°C | Single-mode ST | / |
| ICF-1150-S-SC-T-IEX | - | -40 to 85°C | Single-mode SC | / |
| ICF-1150I-M-ST-IEX | 2kV | 0to 60°C | Multi-mode ST | / |
| ICF-1150I-M-SC-IEX | 2kV | 0to 60°C | Multi-mode SC | / |
| ICF-1150I-S-ST-IEX | 2kV | 0to 60°C | Single-mode ST | / |
| ICF-1150I-S-SC-IEX | 2kV | 0to 60°C | Single-mode SC | / |
| ICF-1150I-M-ST-T-IEX | 2kV | -40 to 85°C | Multi-mode ST | / |
| ICF-1150I-M-SC-T-IEX | 2kV | -40 to 85°C | Multi-mode SC | / |
| ICF-1150I-S-ST-T-IEX | 2kV | -40 to 85°C | Single-mode ST | / |
| ICF-1150I-S-SC-T-IEX | 2kV | -40 to 85°C | Single-mode SC | / |
Related products
-
MOXA NPort 5250AI-M12 2-port RS-232/422/485 dev...
Introduction The NPort® 5000AI-M12 serial device servers are designed to make serial devices network-ready in an instant, and provide direct access to serial devices from anywhere on the network. Moreover, the NPort 5000AI-M12 is compliant with EN 50121-4 and all mandatory sections of EN 50155, covering operating temperature, power input voltage, surge, ESD, and vibration, making them suitable for rolling stock and wayside app...
-
MOXA MGate 5101-PBM-MN Modbus TCP Gateway
Introduction The MGate 5101-PBM-MN gateway provides a communication portal between PROFIBUS devices (e.g. PROFIBUS drives or instruments) and Modbus TCP hosts. All models are protected with a rugged metallic casing, DIN-rail mountable, and offer optional built-in optical isolation. The PROFIBUS and Ethernet status LED indicators are provided for easy maintenance. The rugged design is suitable for industrial applications such as oil/gas, power...
-
MOXA EDS-205A 5-port compact unmanaged Ethernet...
Introduction The EDS-205A Series 5-port industrial Ethernet switches support IEEE 802.3 and IEEE 802.3u/x with 10/100M full/half-duplex, MDI/MDI-X auto-sensing. The EDS-205A Series has 12/24/48 VDC (9.6 to 60 VDC) redundant power inputs that can be connected simultaneously to live DC power sources. These switches have been designed for harsh industrial environments, such as in maritime (DNV/GL/LR/ABS/NK), rail way...
-
MOXA TB-F25 Connector
Moxa's cables Moxa's cables come in a variety of lengths with multiple pin options to ensure compatibility for a wide range of applications. Moxa's connectors include a selection of pin and code types with high IP ratings to ensure suitability for industrial environments. Specifications Physical Characteristics Description TB-M9: DB9 ...
-
MOXA NPort 5650-16 Industrial Rackmount Serial ...
Features and Benefits Standard 19-inch rackmount size Easy IP address configuration with LCD panel (excluding wide-temperature models) Configure by Telnet, web browser, or Windows utility Socket modes: TCP server, TCP client, UDP SNMP MIB-II for network management Universal high-voltage range: 100 to 240 VAC or 88 to 300 VDC Popular low-voltage ranges: ±48 VDC (20 to 72 VDC, -20 to -72 VDC) ...
-
MOXA ioMirror E3210 Universal Controller I/O
Introduction The ioMirror E3200 Series, which is designed as a cable-replacement solution to connect remote digital input signals to output signals over an IP network, provides 8 digital input channels, 8 digital output channels, and a 10/100M Ethernet interface. Up to 8 pairs of digital input and output signals can be exchanged over Ethernet with another ioMirror E3200 Series device, or can be sent to a local PLC or DCS controller. Ove...