MOXA ICF-1150I-S-SC Serial-to-Fiber Converter
3-way communication: RS-232, RS-422/485, and fiber
Rotary switch to change the pull high/low resistor value
Extends RS-232/422/485 transmission up to 40 km with single-mode or 5 km with multi-mode
-40 to 85°C wide-temperature range models available
C1D2, ATEX, and IECEx certified for harsh industrial environments
Serial Interface
| No. of Ports | 2 |
| Serial Standards | RS-232RS-422RS-485 |
| Baudrate | 50 bps to 921.6 kbps (supports non-standard baudrates) |
| Flow Control | ADDC (automatic data direction control) for RS-485 |
| Connector | DB9 female for RS-232 interface5-pin terminal block for RS-422/485 interfaceFiber ports for RS-232/422/485 interface |
| Isolation | 2 kV (I models) |
Serial Signals
| RS-232 | TxD, RxD, GND |
| RS-422 | Tx+, Tx-, Rx+, Rx-, GND |
| RS-485-4w | Tx+, Tx-, Rx+, Rx-, GND |
| RS-485-2w | Data+, Data-, GND |
Power Parameters
| Input Current | ICF-1150 Series: 264 mA@12to 48 VDC ICF-1150I Series: 300 mA@12to 48 VDC |
| Input Voltage | 12to48 VDC |
| No. of Power Inputs | 1 |
| Overload Current Protection | Supported |
| Power Connector | Terminal block |
| Power Consumption | ICF-1150 Series: 264 mA@12to 48 VDC ICF-1150I Series: 300 mA@12to 48 VDC |
Physical Characteristics
| Housing | Metal |
| IP Rating | IP30 |
| Dimensions | 30.3 x70 x115 mm (1.19x 2.76 x 4.53 in) |
| Weight | 330 g (0.73 lb) |
| Installation | DIN-rail mounting |
Environmental Limits
| Operating Temperature |
Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 85°C (-40 to 185°F) |
| Storage Temperature (package included) | -40 to 85°C (-40 to185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
MOXA ICF-1150I-S-SC Available Models
| Model Name | Isolation | Operating Temp. | Fiber Module Type | IECEx Supported |
| ICF-1150-M-ST | - | 0 to 60°C | Multi-mode ST | - |
| ICF-1150-M-SC | - | 0 to 60°C | Multi-mode SC | - |
| ICF-1150-S-ST | - | 0 to 60°C | Single-mode ST | - |
| ICF-1150-S-SC | - | 0 to 60°C | Single-mode SC | - |
| ICF-1150-M-ST-T | - | -40 to 85°C | Multi-mode ST | - |
| ICF-1150-M-SC-T | - | -40 to 85°C | Multi-mode SC | - |
| ICF-1150-S-ST-T | - | -40 to 85°C | Single-mode ST | - |
| ICF-1150-S-SC-T | - | -40 to 85°C | Single-mode SC | - |
| ICF-1150I-M-ST | 2kV | 0 to 60°C | Multi-mode ST | - |
| ICF-1150I-M-SC | 2kV | 0 to 60°C | Multi-mode SC | - |
| ICF-1150I-S-ST | 2kV | 0 to 60°C | Single-mode ST | - |
| ICF-1150I-S-SC | 2kV | 0 to 60°C | Single-mode SC | - |
| ICF-1150I-M-ST-T | 2kV | -40 to 85°C | Multi-mode ST | - |
| ICF-1150I-M-SC-T | 2kV | -40 to 85°C | Multi-mode SC | - |
| ICF-1150I-S-ST-T | 2kV | -40 to 85°C | Single-mode ST | - |
| ICF-1150I-S-SC-T | 2kV | -40 to 85°C | Single-mode SC | - |
| ICF-1150-M-ST-IEX | - | 0to 60°C | Multi-mode ST | / |
| ICF-1150-M-SC-IEX | - | 0to 60°C | Multi-mode SC | / |
| ICF-1150-S-ST-IEX | - | 0to 60°C | Single-mode ST | / |
| ICF-1150-S-SC-IEX | - | 0to 60°C | Single-mode SC | / |
| ICF-1150-M-ST-T-IEX | - | -40 to 85°C | Multi-mode ST | / |
| ICF-1150-M-SC-T-IEX | - | -40 to 85°C | Multi-mode SC | / |
| ICF-1150-S-ST-T-IEX | - | -40 to 85°C | Single-mode ST | / |
| ICF-1150-S-SC-T-IEX | - | -40 to 85°C | Single-mode SC | / |
| ICF-1150I-M-ST-IEX | 2kV | 0to 60°C | Multi-mode ST | / |
| ICF-1150I-M-SC-IEX | 2kV | 0to 60°C | Multi-mode SC | / |
| ICF-1150I-S-ST-IEX | 2kV | 0to 60°C | Single-mode ST | / |
| ICF-1150I-S-SC-IEX | 2kV | 0to 60°C | Single-mode SC | / |
| ICF-1150I-M-ST-T-IEX | 2kV | -40 to 85°C | Multi-mode ST | / |
| ICF-1150I-M-SC-T-IEX | 2kV | -40 to 85°C | Multi-mode SC | / |
| ICF-1150I-S-ST-T-IEX | 2kV | -40 to 85°C | Single-mode ST | / |
| ICF-1150I-S-SC-T-IEX | 2kV | -40 to 85°C | Single-mode SC | / |
Related products
-
MOXA EDS-2008-EL Industrial Ethernet Switch
Introduction The EDS-2008-EL series of industrial Ethernet switches have up to eight 10/100M copper ports, which are ideal for applications that require simple industrial Ethernet connections. To provide greater versatility for use with applications from different industries, the EDS-2008-EL Series also allows users to enable or disable the Quality of Service (QoS) function, and broadcast storm protection (BSP) wi...
-
MOXA TCF-142-M-SC-T Industrial Serial-to-Fiber ...
Features and Benefits Ring and point-to-point transmission Extends RS-232/422/485 transmission up to 40 km with single-mode (TCF- 142-S) or 5 km with multi-mode (TCF-142-M) Decreases signal interference Protects against electrical interference and chemical corrosion Supports baudrates up to 921.6 kbps Wide-temperature models available for -40 to 75°C environments ...
-
MOXA MGate 5118 Modbus TCP Gateway
Introduction The MGate 5118 industrial protocol gateways support the SAE J1939 protocol, which is based on CAN bus (Controller Area Network). SAE J1939 is used to implement communication and diagnostics among vehicle components, diesel engine generators, and compression engines, and is suitable for the heavy-duty truck industry and backup power systems. It is now common to use an engine control unit (ECU) to control these kinds of devic...
-
MOXA IKS-6726A-2GTXSFP-HV-T 24+2G-port Modular ...
Features and Benefits 2 Gigabit plus 24 Fast Ethernet ports for copper and fiber Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches) , and STP/RSTP/MSTP for network redundancy Modular design lets you choose from a variety of media combinations -40 to 75°C operating temperature range Supports MXstudio for easy, visualized industrial network management V-ON™ ensures millisecond-level multicast dat...
-
MOXA INJ-24A-T Gigabit high-power PoE+ injector
Introduction The INJ-24A is a Gigabit high-power PoE+ injector that combines power and data and delivers them to a powered device over one Ethernet cable. Designed for power-hungry devices, the INJ-24A injector provides up to 60 watts, which is twice as much power as conventional PoE+ injectors. The injector also includes features such as a DIP switch configurator and LED indicator for PoE management, and it can also support 2...
-
MOXA EDS-510A-3SFP-T Layer 2 Managed Industrial...
Features and Benefits 2 Gigabit Ethernet ports for redundant ring and 1 Gigabit Ethernet port for uplink solutionTurbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), RSTP/STP, and MSTP for network redundancy TACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network security Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01 ...