English
  • head_banner_01

MOXA TCF-142-M-SC-T Industrial Serial-to-Fiber Converter

  • MOXA TCF-142-M-SC-T Industrial Serial-to-Fiber Converter
  • MOXA TCF-142-M-SC-T Industrial Serial-to-Fiber Converter
  • MOXA TCF-142-M-SC-T Industrial Serial-to-Fiber Converter
  • MOXA TCF-142-M-SC-T Industrial Serial-to-Fiber Converter
  • MOXA TCF-142-M-SC-T Industrial Serial-to-Fiber Converter
  • MOXA TCF-142-M-SC-T Industrial Serial-to-Fiber Converter
  • MOXA TCF-142-M-SC-T Industrial Serial-to-Fiber Converter

Short Description:

The TCF-142 media converters are equipped with a multiple interface circuit that can handle RS-232 or RS-422/485 serial interfaces and multimode or single-mode fiber. TCF-142 converters are used to extend serial transmission up to 5 km (TCF-142-M with multi-mode fiber) or up to 40 km (TCF-142-S with single-mode fiber). The TCF-142 converters can be configured to convert either RS-232 signals, or RS-422/485 signals, but not both at the same time.


Product Detail

Product Tags

Features and Benefits

Ring and point-to-point transmission

Extends RS-232/422/485 transmission up to 40 km with single-mode (TCF- 142-S) or 5 km with multi-mode (TCF-142-M)

Decreases signal interference

Protects against electrical interference and chemical corrosion

Supports baudrates up to 921.6 kbps

Wide-temperature models available for -40 to 75°C environments

Specifications

 

Serial Signals

RS-232 TxD, RxD, GND
RS-422 Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w Data+, Data-, GND

 

Power Parameters

No. of Power Inputs 1
Input Current 70to140 mA@12to 48 VDC
Input Voltage 12to48 VDC
Overload Current Protection Supported
Power Connector Terminal block
Power Consumption 70to140 mA@12to 48 VDC
Reverse Polarity Protection Supported

 

Physical Characteristics

IP Rating IP30
Housing Metal
Dimensions (with ears) 90x100x22 mm (3.54 x 3.94 x 0.87 in)
Dimensions (without ears) 67x100x22 mm (2.64 x 3.94 x 0.87 in)
Weight 320 g (0.71 lb)
Installation Wall mounting

 

Environmental Limits

Operating Temperature Standard Models: 0 to 60°C (32 to 140°F)Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature (package included) -40 to 85°C (-40 to185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)

 

MOXA TCF-142-M-SC-T  Available Models

Model Name

OperatingTemp.

FiberModule Type
TCF-142-M-ST

0 to 60°C

Multi-mode ST
TCF-142-M-SC

0 to 60°C

Multi-mode SC
TCF-142-S-ST

0 to 60°C

Single-mode ST
TCF-142-S-SC

0 to 60°C

Single-mode SC
TCF-142-M-ST-T

-40 to 75°C

Multi-mode ST
TCF-142-M-SC-T

-40 to 75°C

Multi-mode SC
TCF-142-S-ST-T

-40 to 75°C

Single-mode ST
TCF-142-S-SC-T

-40 to 75°C

Single-mode SC

 

 

  • Previous:
  • Next:
    • Write your message here and send it to us

    Related products

    • MOXA NPort 5130A Industrial General Device Server

      MOXA NPort 5130A Industrial General Device Server

      Features and Benefits Power consumption of only 1 W  Fast 3-step web-based configuration  Surge protection for serial, Ethernet, and power  COM port grouping and UDP multicast applications  Screw-type power connectors for secure installation  Real COM and TTY drivers for Windows, Linux, and macOS  Standard TCP/IP interface and versatile TCP and UDP operation modes  Connects up to 8 TCP hosts ...

      See more products >
    • MOXA MGate 5109 1-port Modbus Gateway

      MOXA MGate 5109 1-port Modbus Gateway

      Features and Benefits Supports Modbus RTU/ASCII/TCP master/client and slave/server Supports DNP3 serial/TCP/UDP master and outstation (Level 2) DNP3 master mode supports up to 26600 points Supports time-synchronization through DNP3 Effortless configuration via web-based wizard Built-in Ethernet cascading for easy wiring Embedded traffic monitoring/diagnostic information for easy troubleshooting microSD card for co...

      See more products >
    • MOXA NPort 5450I Industrial General Serial Device Server

      MOXA NPort 5450I Industrial General Serial Devi...

      Features and Benefits User-friendly LCD panel for easy installation Adjustable termination and pull high/low resistors Socket modes: TCP server, TCP client, UDP Configure by Telnet, web browser, or Windows utility SNMP MIB-II for network management 2 kV isolation protection for NPort 5430I/5450I/5450I-T -40 to 75°C operating temperature range (-T model) Speci...

      See more products >
    • MOXA CP-104EL-A w/o Cable RS-232 low-profile PCI Express board

      MOXA CP-104EL-A w/o Cable RS-232 low-profile P...

      Introduction   The CP-104EL-A is a smart, 4-port PCI Express board designed for POS and ATM applications. It is a top choice of industrial automation engineers and system integrators, and supports many different operating systems, including Windows, Linux, and even UNIX. In addition, each of the board’s 4 RS-232 serial ports supports a fast 921.6 kbps baudrate. The CP-104EL-A provides full modem control signals to ensure compatibility wit...

      See more products >
    • Moxa NPort P5150A Industrial PoE Serial Device Server

      Moxa NPort P5150A Industrial PoE Serial Device ...

      Features and Benefits IEEE 802.3af-compliant PoE power device equipment Speedy 3-step web-based configuration Surge protection for serial, Ethernet, and power COM port grouping and UDP multicast applications Screw-type power connectors for secure installation Real COM and TTY drivers for Windows, Linux, and macOS Standard TCP/IP interface and versatile TCP and UDP operation modes ...

      See more products >
    • MOXA IMC-21A-M-ST-T Industrial Media Converter

      MOXA IMC-21A-M-ST-T Industrial Media Converter

      Features and Benefits Multi-mode or single-mode, with SC or ST fiber connector Link Fault Pass-Through (LFPT) -40 to 75°C operating temperature range (-T models) DIP switches to select FDX/HDX/10/100/Auto/Force Specifications Ethernet Interface 10/100BaseT(X) Ports (RJ45 connector) 1 100BaseFX Ports (multi-mode SC conne...

      See more products >
    Hit enter to search or ESC to close