MOXA EDS-305 5-port unmanaged Ethernet switch
The EDS-305 Ethernet switches provide an economical solution for your industrial Ethernet connections. These 5-port switches come with a built-in relay warning function that alerts network engineers when power failures or port breaks occur. In addition, the switches are designed for harsh industrial environments, such as the hazardous locations defined by the Class 1 Div. 2 and ATEX Zone 2 standards.
The switches comply with FCC, UL, and CE standards and support either a standard operating temperature range of 0 to 60°C or a wide operating temperature range of -40 to 75°C. All switches in the series undergo a 100% burn-in test to ensure that they fulfill the special needs of industrial automation control applications. The EDS-305 switches can be installed easily on a DIN rail or in a distribution box.
Relay output warning for power failure and port break alarm
Broadcast storm protection
-40 to 75°C wide operating temperature range (-T models)
Related products
-
MOXA MGate MB3180 Modbus TCP Gateway
Features and Benefits FeaSupports Auto Device Routing for easy configuration Supports route by TCP port or IP address for flexible deployment Converts between Modbus TCP and Modbus RTU/ASCII protocols 1 Ethernet port and 1, 2, or 4 RS-232/422/485 ports 16 simultaneous TCP masters with up to 32 simultaneous requests per master Easy hardware setup and configurationtures and Benefits ...
-
MOXA IMC-21A-S-SC Industrial Media Converter
Features and Benefits Multi-mode or single-mode, with SC or ST fiber connector Link Fault Pass-Through (LFPT) -40 to 75°C operating temperature range (-T models) DIP switches to select FDX/HDX/10/100/Auto/Force Specifications Ethernet Interface 10/100BaseT(X) Ports (RJ45 connector) 1 100BaseFX Ports (multi-mode SC conne...
-
MOXA SFP-1FESLC-T 1-port Fast Ethernet SFP Module
Introduction Moxa's small form-factor pluggable transceiver (SFP) Ethernet fiber modules for Fast Ethernet provide coverage across a wide range of communication distances. The SFP-1FE Series 1-port Fast Ethernet SFP modules are available as optional accessories for a wide range of Moxa Ethernet switches. SFP module with 1 100Base multi-mode, LC connector for 2/4 km transmission, -40 to 85°C operating temperature. ...
-
MOXA NAT-102 Secure Router
Introduction The NAT-102 Series is an industrial NAT device that is designed to simplify the IP configuration of machines in existing network infrastructure in factory automation environments. The NAT-102 Series provides complete NAT functionality to adapt your machines to specific network scenarios without complicated, costly, and time-consuming configurations. These devices also protect the internal network from unauthorized access by outsi...
-
MOXA EDS-G205-1GTXSFP-T 5-port Full Gigabit Unm...
Features and Benefits Full Gigabit Ethernet portsIEEE 802.3af/at, PoE+ standards Up to 36 W output per PoE port 12/24/48 VDC redundant power inputs Supports 9.6 KB jumbo frames Intelligent power consumption detection and classification Smart PoE overcurrent and short-circuit protection -40 to 75°C operating temperature range (-T models) Specifications ...
-
MOXA PT-7828 Series Rackmount Ethernet switch
Introduction The PT-7828 switches are high-performance Layer 3 Ethernet switches that support Layer 3 routing functionality to facilitate the deployment of applications across networks. The PT-7828 switches are also designed to meet the strict demands of power substation automation systems (IEC 61850-3, IEEE 1613), and railway applications (EN 50121-4). The PT-7828 Series also features critical packet prioritization (GOOSE, SMVs, andPTP)....