MOXA EDS-309-3M-SC Unmanaged Ethernet switch
The EDS-309 Ethernet switches provide an economical solution for your industrial Ethernet connections. These 9-port switches come with a built-in relay warning function that alerts network engineers when power failures or port breaks occur. In addition, the switches are designed for harsh industrial environments, such as the hazardous locations defined by the Class 1 Div. 2 and ATEX Zone 2 standards.
The switches comply with FCC, UL, and CE standards and support either a standard operating temperature range of -10 to 60°C or a wide operating temperature range of -40 to 75°C. All switches in the series undergo a 100% burn-in test to ensure that they fulfill the special needs of industrial automation control applications. The EDS-309 switches can be installed easily on a DIN rail or in a distribution box.
Relay output warning for power failure and port break alarm
Broadcast storm protection
-40 to 75°C wide operating temperature range (-T models)
Related products
-
MOXA MGate 5109 1-port Modbus Gateway
Features and Benefits Supports Modbus RTU/ASCII/TCP master/client and slave/server Supports DNP3 serial/TCP/UDP master and outstation (Level 2) DNP3 master mode supports up to 26600 points Supports time-synchronization through DNP3 Effortless configuration via web-based wizard Built-in Ethernet cascading for easy wiring Embedded traffic monitoring/diagnostic information for easy troubleshooting microSD card for co...
-
MOXA EDR-G9010 Series industrial secure router
Introduction The EDR-G9010 Series is a set of highly integrated industrial multi-port secure routers with firewall/NAT/VPN and managed Layer 2 switch functions. These devices are designed for Ethernet-based security applications in critical remote control or monitoring networks. These secure routers provide an electronic security perimeter to protect critical cyber assets including substations in power applications, pump-and-t...
-
MOXA MGate MB3170-T Modbus TCP Gateway
Features and Benefits Supports Auto Device Routing for easy configuration Supports route by TCP port or IP address for flexible deployment Connects up to 32 Modbus TCP servers Connects up to 31 or 62 Modbus RTU/ASCII slaves Accessed by up to 32 Modbus TCP clients (retains 32 Modbus requests for each Master) Supports Modbus serial master to Modbus serial slave communications Built-in Ethernet cascading for easy wir...
-
MOXA EDS-G512E-4GSFP Layer 2 Managed Switch
Introduction The EDS-G512E Series is equipped with 12 Gigabit Ethernet ports and up to 4 fiber-optic ports, making it ideal for upgrading an existing network to Gigabit speed or building a new full Gigabit backbone. It also comes with 8 10/100/1000BaseT(X), 802.3af (PoE), and 802.3at (PoE+)-compliant Ethernet port options to connect high-bandwidth PoE devices. Gigabit transmission increases bandwidth for higher pe...
-
MOXA NPort 5230 Industrial General Serial Device
Features and Benefits Compact design for easy installation Socket modes: TCP server, TCP client, UDP Easy-to-use Windows utility for configuring multiple device servers ADDC (Automatic Data Direction Control) for 2-wire and 4-wire RS-485 SNMP MIB-II for network management Specifications Ethernet Interface 10/100BaseT(X) Ports (RJ45 connect...
-
MOXA EDS-518E-4GTXSFP Gigabit Managed Industria...
Features and Benefits 4 Gigabit plus 14 fast Ethernet ports for copper and fiberTurbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), RSTP/STP, and MSTP for network redundancy RADIUS, TACACS+, MAB Authentication, SNMPv3, IEEE 802.1X, MAC ACL, HTTPS, SSH, and sticky MAC-addresses to enhance network security Security features based on IEC 62443 EtherNet/IP, PROFINET, and Modbus TCP protocols support...