MOXA EDS-G205A-4PoE-1GSFP 5-port POE Industrial Ethernet Switch

Short Description:

The EDS-G205A-4PoE switches are smart, 5-port, unmanaged full Gigabit Ethernet switches supporting Power-over-Ethernet on ports 2 to 5. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-G205A-4PoE switches enable centralization of the power supply, providing up to 36 watts of power per port and reducing the effort needed for installing power.

The switches can be used to power IEEE 802.3af/at standard devices (power devices), eliminating the need for additional wiring, and they support IEEE 802.3/802.3u/802.3x with 10/100/1000M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical high-bandwidth solution for your industrial Ethernet network.

Send email to us

Product Detail

Product Tags

Features and Benefits

Full Gigabit Ethernet ports
IEEE 802.3af/at, PoE+ standards

Up to 36 W output per PoE port

12/24/48 VDC redundant power inputs

Supports 9.6 KB jumbo frames

Intelligent power consumption detection and classification

Smart PoE overcurrent and short-circuit protection

-40 to 75°C operating temperature range (-T models)

Specifications

Input/Output Interface

Alarm Contact Channels

1 relay output with current carrying capacity of 1 A @ 24 VDC

Ethernet Interface

10/100/1000BaseT(X) Ports (RJ45 connector)

4Auto negotiation speed Full/Half duplex mode

Auto MDI/MDI-X connection

Combo Ports (10/100/1000BaseT(X) or 100/1000BaseSFP+)

Standards

IEEE 802.3 for10BaseTIEEE 802.3ab for 1000BaseT(X)

IEEE 802.3u for 100BaseT(X) and 100BaseFX

IEEE 802.3x for flow control

IEEE 802.3z for 1000BaseX

IEEE 802.3az for Energy-Efficient Ethernet

Power Parameters

Connection	1 removable 6-contact terminal block(s)
Input Voltage	12/24/48 VDC, Redundantdual inputs
Operating Voltage	9.6 to 60 VDC
Reverse Polarity Protection	Supported
Input Current	0.14A@24 VDC

Physical Characteristics

Housing	Metal
IP Rating	IP30
Dimensions	29x135x105 mm (1.14x5.31 x4.13 in)
Weight	290 g (0.64 lb)
Installation	DIN-rail mounting, Wall mounting (with optional kit)

Environmental Limits

Operating Temperature	EDS-G205-1GTXSFP: -10 to 60°C (14to140°F)EDS-G205-1GTXSFP-T: -40 to 75°C (-40 to 167°F)
Storage Temperature (package included)	-40 to 85°C (-40 to185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)

MOXA EDS-G205A-4PoE-1GSFP Available Models

Model 1	MOXA EDS-G205-1GTXSFP
Model 2	MOXA EDS-G205-1GTXSFP-T

Previous: MOXA EDS-G205-1GTXSFP 5-port Full Gigabit Unmanaged POE Industrial Ethernet Switch

Next: MOXA EDS-G308 8G-port Full Gigabit Unmanaged Industrial Ethernet Switch

eds g205a

eds g205a 4poe

eds g205a 4poe 1gsfp

eds g205a 4poe t

Moxa Poe

Write your message here and send it to us

Related products

MOXA TCF-142-M-SC-T Industrial Serial-to-Fiber ...

Features and Benefits Ring and point-to-point transmission Extends RS-232/422/485 transmission up to 40 km with single-mode (TCF- 142-S) or 5 km with multi-mode (TCF-142-M) Decreases signal interference Protects against electrical interference and chemical corrosion Supports baudrates up to 921.6 kbps Wide-temperature models available for -40 to 75°C environments ...

See more products >
MOXA EDS-408A-PN Managed Industrial Ethernet Sw...

Features and Benefits Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and RSTP/STP for network redundancy IGMP Snooping, QoS, IEEE 802.1Q VLAN, and port-based VLAN supported Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01 PROFINET or EtherNet/IP enabled by default (PN or EIP models) Supports MXstudio for easy, visualized industrial network mana...

See more products >
MOXA AWK-3252A Series Wireless AP/bridge/client

Introduction The AWK-3252A Series 3-in-1 industrial wireless AP/bridge/client is designed to meet the growing need for faster data transmission speeds through IEEE 802.11ac technology for aggregated data rates of up to 1.267 Gbps. The AWK-3252A is compliant with industrial standards and approvals covering operating temperature, power input voltage, surge, ESD, and vibration. The two redundant DC power inputs increase the reliability of the po...

See more products >
MOXA NAT-102 Secure Router

Introduction The NAT-102 Series is an industrial NAT device that is designed to simplify the IP configuration of machines in existing network infrastructure in factory automation environments. The NAT-102 Series provides complete NAT functionality to adapt your machines to specific network scenarios without complicated, costly, and time-consuming configurations. These devices also protect the internal network from unauthorized access by outsi...

See more products >
MOXA EDS-408A-SS-SC Layer 2 Managed Industrial ...

Features and Benefits Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and RSTP/STP for network redundancy IGMP Snooping, QoS, IEEE 802.1Q VLAN, and port-based VLAN supported Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01 PROFINET or EtherNet/IP enabled by default (PN or EIP models) Supports MXstudio for easy, visualized industrial network mana...

See more products >
MOXA MGate MB3660-16-2AC Modbus TCP Gateway

Features and Benefits Supports Auto Device Routing for easy configuration Supports route by TCP port or IP address for flexible deployment Innovative Command Learning for improving system performance Supports agent mode for high performance through active and parallel polling of serial devices Supports Modbus serial master to Modbus serial slave communications 2 Ethernet ports with the same IP or dual IP addresses...

See more products >