MOXA TCF-142-M-ST-T Industrial Serial-to-Fiber Converter

Short Description:

The TCF-142 media converters are equipped with a multiple interface circuit that can handle RS-232 or RS-422/485 serial interfaces and multimode or single-mode fiber. TCF-142 converters are used to extend serial transmission up to 5 km (TCF-142-M with multi-mode fiber) or up to 40 km (TCF-142-S with single-mode fiber). The TCF-142 converters can be configured to convert either RS-232 signals, or RS-422/485 signals, but not both at the same time.

Send email to us

Product Detail

Product Tags

Features and Benefits

Ring and point-to-point transmission

Extends RS-232/422/485 transmission up to 40 km with single-mode (TCF- 142-S) or 5 km with multi-mode (TCF-142-M)

Decreases signal interference

Protects against electrical interference and chemical corrosion

Supports baudrates up to 921.6 kbps

Wide-temperature models available for -40 to 75°C environments

Specifications

Serial Signals

RS-232	TxD, RxD, GND
RS-422	Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w	Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w	Data+, Data-, GND

Power Parameters

No. of Power Inputs	1
Input Current	70to140 mA@12to 48 VDC
Input Voltage	12to48 VDC
Overload Current Protection	Supported
Power Connector	Terminal block
Power Consumption	70to140 mA@12to 48 VDC
Reverse Polarity Protection	Supported

Physical Characteristics

IP Rating	IP30
Housing	Metal
Dimensions (with ears)	90x100x22 mm (3.54 x 3.94 x 0.87 in)
Dimensions (without ears)	67x100x22 mm (2.64 x 3.94 x 0.87 in)
Weight	320 g (0.71 lb)
Installation	Wall mounting

Environmental Limits

Operating Temperature	Standard Models: 0 to 60°C (32 to 140°F)Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature (package included)	-40 to 85°C (-40 to185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)

MOXA TCF-142-M-ST-T Available Models

Model Name	OperatingTemp.	FiberModule Type
TCF-142-M-ST	0 to 60°C	Multi-mode ST
TCF-142-M-SC	0 to 60°C	Multi-mode SC
TCF-142-S-ST	0 to 60°C	Single-mode ST
TCF-142-S-SC	0 to 60°C	Single-mode SC
TCF-142-M-ST-T	-40 to 75°C	Multi-mode ST
TCF-142-M-SC-T	-40 to 75°C	Multi-mode SC
TCF-142-S-ST-T	-40 to 75°C	Single-mode ST
TCF-142-S-SC-T	-40 to 75°C	Single-mode SC

Previous: MOXA TCF-142-S-ST Industrial Serial-to-Fiber Converter

Next: MOXA 45MR-1600 Advanced Controllers & I/O

Moxa Tcf 142

moxa tcf 142 m st t

tcf 142 m st t

tcf142

Write your message here and send it to us

Related products

MOXA EDS-2008-EL Industrial Ethernet Switch

Introduction The EDS-2008-EL series of industrial Ethernet switches have up to eight 10/100M copper ports, which are ideal for applications that require simple industrial Ethernet connections. To provide greater versatility for use with applications from different industries, the EDS-2008-EL Series also allows users to enable or disable the Quality of Service (QoS) function, and broadcast storm protection (BSP) wi...

See more products >
MOXA EDS-528E-4GTXSFP-LV Gigabit Managed Indust...

Features and Benefits 4 Gigabit plus 24 fast Ethernet ports for copper and fiberTurbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), RSTP/STP, and MSTP for network redundancyRADIUS, TACACS+, MAB Authentication, SNMPv3, IEEE 802.1X, MAC ACL, HTTPS, SSH, and sticky MAC-addresses to enhance network securitySecurity features based on IEC 62443 EtherNet/IP, PROFINET, and Modbus TCP protocols supported...

See more products >
MOXA CP-168U 8-port RS-232 Universal PCI serial...

Introduction The CP-168U is a smart, 8-port universal PCI board designed for POS and ATM applications. It is a top choice of industrial automation engineers and system integrators, and supports many different operating systems, including Windows, Linux, and even UNIX. In addition, each of the board’s eight RS-232 serial ports supports a fast 921.6 kbps baudrate. The CP-168U provides full modem control signals to ensure compatibility wit...

See more products >
MOXA NPort IA5450A industrial automation device...

Introduction The NPort IA5000A device servers are designed for connecting industrial automation serial devices, such as PLCs, sensors, meters, motors, drives, barcode readers, and operator displays. The device servers are solidly built, come in a metal housing and with screw connectors, and provide full surge protection. The NPort IA5000A device servers are extremely user-friendly, making simple and reliable serial-to-Ethernet solutions possi...

See more products >
MOXA EDS-508A-MM-SC-T Layer 2 Managed Industria...

Features and Benefits Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and STP/RSTP/MSTP for network redundancyTACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network security Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01 Supports MXstudio for easy, visualized industrial network management ...

See more products >
MOXA UPort1650-16 USB to 16-port RS-232/422/485...

Features and Benefits Hi-Speed USB 2.0 for up to 480 Mbps USB data transmission rates 921.6 kbps maximum baudrate for fast data transmission Real COM and TTY drivers for Windows, Linux, and macOS Mini-DB9-female-to-terminal-block adapter for easy wiring LEDs for indicating USB and TxD/RxD activity 2 kV isolation protection (for “V' models) Specifications ...

See more products >