MOXA EDS-510E-3GTXSFP Layer 2 Managed Industrial Ethernet Switch
3 Gigabit Ethernet ports for redundant ring or uplink solutionsTurbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), RSTP/STP, and MSTP for network redundancyRADIUS, TACACS+, SNMPv3, IEEE 802.1x, HTTPS, SSH, and sticky MAC address to enhance network security
Security features based on IEC 62443
EtherNet/IP, PROFINET, and Modbus TCP protocols supported for device management and monitoring
Supports MXstudio for easy, visualized industrial network management
V-ON™ ensures millisecond-level multicast data and video network recovery
Input/Output Interface
| Alarm Contact Channels | 1, Relay output with current carrying capacity of 1 A @ 24 VDC |
| Buttons | Reset button |
| Digital Input Channels | 1 |
| Digital Inputs | +13 to +30 V for state 1 -30 to +3 V for state 0 Max. input current: 8 mA |
Ethernet Interface
| 10/100BaseT(X) Ports (RJ45 connector) | 7Auto negotiation speed Full/Half duplex mode
Auto MDI/MDI-Xconnection |
| Combo Ports (10/100/1000BaseT(X) or100/1000BaseSFP+) | 3 |
| 10/100/1000BaseT(X) Ports (RJ45 connector) | Auto negotiation speed Full/Half duplex modeAuto MDI/MDI-X connection |
| Standards | IEEE802.3for10BaseTIEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3ab for1000BaseT(X) IEEE 802.3z for1000BaseSX/LX/LHX/ZX IEEE 802.3x for flow control IEEE 802.1D-2004 for Spanning Tree Protocol IEEE 802.1wfor Rapid Spanning Tree Protocol IEEE 802.1s for Multiple Spanning Tree Protocol IEEE 802.1p for Class of Service IEEE 802.1Q for VLAN Tagging IEEE 802.1X for authentication IEEE 802.3ad for Port Trunkwith LACP |
Power Parameters
| Connection | 2 removable 4-contact terminal block(s) |
| Input Current | 0.68 A@24 VDC |
| Input Voltage | 12/24/48/-48 VDC, Redundantdual inputs |
| Operating Voltage | 9.6 to 60 VDC |
| Overload Current Protection | Supported |
| Reverse Polarity Protection | Supported |
Physical Characteristics
| Housing | Metal |
| IP Rating | IP30 |
| Dimensions | 79.2 x135x116mm(3.12x 5.31 x 4.57 in) |
| Weight | 1690g(3.73lb) |
| Installation | DIN-rail mounting, Wall mounting (with optional kit) |
Environmental Limits
| Operating Temperature | EDS-510E-3GTXSFP:-10 to 60°C (14to140°F)EDS-510E-3GTXSFP-T: -40 to 75°C (-40 to 167°F) |
| Storage Temperature (package included) | -40 to 85°C (-40 to185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
MOXA EDS-510E-3GTXSFP Available Models
| Model 1 | MOXA EDS-510E-3GTXSFP |
| Model 2 | MOXA EDS-510E-3GTXSFP-T |
Related products
-
MOXA IMC-101-M-SC Ethernet-to-Fiber Media Conve...
Features and Benefits 10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X Link Fault Pass-Through (LFPT) Power failure, port break alarm by relay output Redundant power inputs -40 to 75°C operating temperature range (-T models) Designed for hazardous locations (Class 1 Div. 2/Zone 2, IECEx) Specifications Ethernet Interface ...
-
MOXA NAT-102 Secure Router
Introduction The NAT-102 Series is an industrial NAT device that is designed to simplify the IP configuration of machines in existing network infrastructure in factory automation environments. The NAT-102 Series provides complete NAT functionality to adapt your machines to specific network scenarios without complicated, costly, and time-consuming configurations. These devices also protect the internal network from unauthorized access by outsi...
-
MOXA AWK-4131A-EU-T WLAN AP/Bridge/Client
Introduction The AWK-4131A IP68 outdoor industrial AP/bridge/client meets the growing need for faster data transmission speeds by supporting 802.11n technology and allowing 2X2 MIMO communication with a net data rate of up to 300 Mbps. The AWK-4131A is compliant with industrial standards and approvals covering operating temperature, power input voltage, surge, ESD, and vibration. The two redundant DC power inputs increase the ...
-
MOXA EDS-408A-PN-T Managed Industrial Ethernet ...
Features and Benefits Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and RSTP/STP for network redundancy IGMP Snooping, QoS, IEEE 802.1Q VLAN, and port-based VLAN supported Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01 PROFINET or EtherNet/IP enabled by default (PN or EIP models) Supports MXstudio for easy, visualized industrial network mana...
-
MOXA EDS-P206A-4PoE Unmanaged Ethernet switch
Introduction The EDS-P206A-4PoE switches are smart, 6-port, unmanaged Ethernet switches supporting PoE (Power-over-Ethernet) on ports 1 to 4. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-P206A-4PoE switches enable centralization of the power supply and provide up to 30 watts of power per port. The switches can be used to power IEEE 802.3af/at-compliant powered devices (PD), el...
-
MOXA NPort 5250A Industrial General Serial Devi...
Features and Benefits Fast 3-step web-based configuration Surge protection for serial, Ethernet, and power COM port grouping and UDP multicast applications Screw-type power connectors for secure installation Dual DC power inputs with power jack and terminal block Versatile TCP and UDP operation modes Specifications Ethernet Interface 10/100Bas...