English
  • head_banner_01

MOXA TCF-142-M-ST Industrial Serial-to-Fiber Converter

  • MOXA TCF-142-M-ST Industrial Serial-to-Fiber Converter
  • MOXA TCF-142-M-ST Industrial Serial-to-Fiber Converter
  • MOXA TCF-142-M-ST Industrial Serial-to-Fiber Converter
  • MOXA TCF-142-M-ST Industrial Serial-to-Fiber Converter
  • MOXA TCF-142-M-ST Industrial Serial-to-Fiber Converter
  • MOXA TCF-142-M-ST Industrial Serial-to-Fiber Converter
  • MOXA TCF-142-M-ST Industrial Serial-to-Fiber Converter

Short Description:

The TCF-142 media converters are equipped with a multiple interface circuit that can handle RS-232 or RS-422/485 serial interfaces and multimode or single-mode fiber. TCF-142 converters are used to extend serial transmission up to 5 km (TCF-142-M with multi-mode fiber) or up to 40 km (TCF-142-S with single-mode fiber). The TCF-142 converters can be configured to convert either RS-232 signals, or RS-422/485 signals, but not both at the same time.


Product Detail

Product Tags

Features and Benefits

Ring and point-to-point transmission

Extends RS-232/422/485 transmission up to 40 km with single-mode (TCF- 142-S) or 5 km with multi-mode (TCF-142-M)

Decreases signal interference

Protects against electrical interference and chemical corrosion

Supports baudrates up to 921.6 kbps

Wide-temperature models available for -40 to 75°C environments

Specifications

 

Serial Signals

RS-232 TxD, RxD, GND
RS-422 Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w Data+, Data-, GND

 

Power Parameters

No. of Power Inputs 1
Input Current 70to140 mA@12to 48 VDC
Input Voltage 12to48 VDC
Overload Current Protection Supported
Power Connector Terminal block
Power Consumption 70to140 mA@12to 48 VDC
Reverse Polarity Protection Supported

 

Physical Characteristics

IP Rating IP30
Housing Metal
Dimensions (with ears) 90x100x22 mm (3.54 x 3.94 x 0.87 in)
Dimensions (without ears) 67x100x22 mm (2.64 x 3.94 x 0.87 in)
Weight 320 g (0.71 lb)
Installation Wall mounting

 

Environmental Limits

Operating Temperature Standard Models: 0 to 60°C (32 to 140°F)Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature (package included) -40 to 85°C (-40 to185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)

 

MOXA TCF-142-M-ST  Available Models

Model Name

OperatingTemp.

FiberModule Type
TCF-142-M-ST

0 to 60°C

Multi-mode ST
TCF-142-M-SC

0 to 60°C

Multi-mode SC
TCF-142-S-ST

0 to 60°C

Single-mode ST
TCF-142-S-SC

0 to 60°C

Single-mode SC
TCF-142-M-ST-T

-40 to 75°C

Multi-mode ST
TCF-142-M-SC-T

-40 to 75°C

Multi-mode SC
TCF-142-S-ST-T

-40 to 75°C

Single-mode ST
TCF-142-S-SC-T

-40 to 75°C

Single-mode SC

 

 

  • Previous:
  • Next:
    • Write your message here and send it to us

    Related products

    • MOXA ICF-1150I-M-SC Serial-to-Fiber Converter

      MOXA ICF-1150I-M-SC Serial-to-Fiber Converter

      Features and Benefits 3-way communication: RS-232, RS-422/485, and fiber Rotary switch to change the pull high/low resistor value Extends RS-232/422/485 transmission up to 40 km with single-mode or 5 km with multi-mode -40 to 85°C wide-temperature range models available C1D2, ATEX, and IECEx certified for harsh industrial environments Specifications ...

      See more products >
    • MOXA EDS-405A-MM-SC Layer 2 Managed Industrial Ethernet Switch

      MOXA EDS-405A-MM-SC Layer 2 Managed Industrial ...

      Features and Benefits Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and RSTP/STP for network redundancy IGMP Snooping, QoS, IEEE 802.1Q VLAN, and port-based VLAN supported Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01 PROFINET or EtherNet/IP enabled by default (PN or EIP models) Supports MXstudio for easy, visualized industrial network mana...

      See more products >
    • MOXA IMC-21A-M-ST Industrial Media Converter

      MOXA IMC-21A-M-ST Industrial Media Converter

      Features and Benefits Multi-mode or single-mode, with SC or ST fiber connector Link Fault Pass-Through (LFPT) -40 to 75°C operating temperature range (-T models) DIP switches to select FDX/HDX/10/100/Auto/Force Specifications Ethernet Interface 10/100BaseT(X) Ports (RJ45 connector) 1 100BaseFX Ports (multi-mode SC conne...

      See more products >
    • MOXA EDS-2010-ML-2GTXSFP 8+2G-port Gigabit Unmanaged Ethernet Switch

      MOXA EDS-2010-ML-2GTXSFP 8+2G-port Gigabit Unma...

      Introduction The EDS-2010-ML series of industrial Ethernet switches have eight 10/100M copper ports and two 10/100/1000BaseT(X) or 100/1000BaseSFP combo ports, which are ideal for applications that require high-bandwidth data convergence. Moreover, to provide greater versatility for use with applications from different industries, the EDS-2010-ML Series also allows users to enable or disable the Quality of Service...

      See more products >
    • MOXA TCF-142-S-ST Industrial Serial-to-Fiber Converter

      MOXA TCF-142-S-ST Industrial Serial-to-Fiber Co...

      Features and Benefits Ring and point-to-point transmission Extends RS-232/422/485 transmission up to 40 km with single-mode (TCF- 142-S) or 5 km with multi-mode (TCF-142-M) Decreases signal interference Protects against electrical interference and chemical corrosion Supports baudrates up to 921.6 kbps Wide-temperature models available for -40 to 75°C environments ...

      See more products >
    • MOXA NPort 5130 Industrial General Device Server

      MOXA NPort 5130 Industrial General Device Server

      Features and Benefits Small size for easy installation  Real COM and TTY drivers for Windows, Linux, and macOS  Standard TCP/IP interface and versatile operation modes  Easy-to-use Windows utility for configuring multiple device servers  SNMP MIB-II for network management  Configure by Telnet, web browser, or Windows utility  Adjustable pull high/low resistor for RS-485 ports ...

      See more products >
    Hit enter to search or ESC to close