English
  • head_banner_01

MOXA NPort 5650-8-DT-J Device Server

  • MOXA NPort 5650-8-DT-J Device Server
  • MOXA NPort 5650-8-DT-J Device Server
  • MOXA NPort 5650-8-DT-J Device Server
  • MOXA NPort 5650-8-DT-J Device Server
  • MOXA NPort 5650-8-DT-J Device Server
  • MOXA NPort 5650-8-DT-J Device Server
  • MOXA NPort 5650-8-DT-J Device Server

Short Description:

MOXA NPort 5650-8-DT-J is NPort 5600-DT Series

8-port RS-232/422/485 desktop device server with RJ45 connectors and 48 VDC power input


Product Detail

Product Tags

Introduction

 

NPort 5600-8-DT device servers can conveniently and transparently connect 8 serial devices to an Ethernet network, allowing you to network your existing serial devices with only basic configuration. You can both centralize management of your serial devices and distribute management hosts over the network. Since the NPort 5600-8-DT device servers have a smaller form factor compared to our 19-inch models, they are a great choice for applications that need additional serial ports, but for which mounting rails are not available.

Convenient Design for RS-485 Applications

The NPort 5650-8-DT device servers support selectable 1 kilo-ohm and 150 kilo-ohms pull high/low resistors and a 120-ohm terminator. In some critical environments, termination resistors may be needed to prevent the reflection of serial signals. When using termination resistors, it is also important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible with all environments, NPort 5600-8-DT device servers use DIP switches to allow users to adjust termination and pull high/low resistor values manually for each serial port.

Convenient Power Inputs

The NPort 5650-8-DT device servers support both power terminal blocks and power jacks for ease of use and greater flexibility. Users can connect the terminal block directly to a DC power source, or use the power jack to connect to an AC circuit through an adapter.

Specifications

 

Physical Characteristics

Housing

Metal

Installation

Desktop

DIN-rail mounting (with optional kit) Wall mounting (with optional kit)

Dimensions (with ears)

229 x 46 x 125 mm (9.01 x 1.81 x 4.92 in)

Dimensions (without ears)

197 x 44 x 125 mm (7.76 x 1.73 x 4.92 in)

Dimensions (with DIN-rail kit on bottom panel)

197 x 53 x 125 mm (7.76 x 2.09 x 4.92 in)

Weight

NPort 5610-8-DT: 1,570 g (3.46 lb)

NPort 5610-8-DT-J: 1,520 g (3.35 lb) NPort 5610-8-DT-T: 1,320 g (2.91 lb) NPort 5650-8-DT: 1,590 g (3.51 lb)

NPort 5650-8-DT-J: 1,540 g (3.40 lb)  NPort 5650-8-DT-T: 1,340 g (2.95 lb)  NPort 5650I-8-DT: 1,660 g (3.66 lb)     NPort 5650I-8-DT-T: 1,410 g (3.11 lb)

Interactive Interface

LCD panel display (standard temp. models only)

Push buttons for configuration (standard temp. models only)

Environmental Limits

Operating Temperature

Standard Models: 0 to 55°C (32 to 140°F)

Wide Temp. Models: -40 to 75°C (-40 to 167°F)

Storage Temperature (package included)

-40 to 75°C (-40 to 167°F)

Ambient Relative Humidity

5 to 95% (non-condensing)

MOXA NPort 5650-8-DT-J Related models

Model Name

Serial Interface

Serial Interface Connector

Serial Interface Isolation

Operating Temp.

Power Adapter

Included in

Package

Input Voltage

NPort 5610-8-DT

RS-232

DB9

–

0 to 55°C

Yes

12 to 48 VDC

NPort 5610-8-DT-T

RS-232

DB9

–

-40 to 75°C

No

12 to 48 VDC

NPort 5610-8-DT-J

RS-232

8-pin RJ45

–

0 to 55°C

Yes

12 to 48 VDC

NPort 5650-8-DT

RS-232/422/485

DB9

–

0 to 55°C

Yes

12 to 48 VDC

NPort 5650-8-DT-T

RS-232/422/485

DB9

–

-40 to 75°C

No

12 to 48 VDC

NPort 5650-8-DT-J

RS-232/422/485

8-pin RJ45

–

0 to 55°C

Yes

12 to 48 VDC

NPort 5650I-8-DT

RS-232/422/485

DB9

2 kV

0 to 55°C

Yes

12 to 48 VDC

NPort 5650I-8-DT-T

RS-232/422/485

DB9

2 kV

-40 to 75°C

No

12 to 48 VDC
  • Previous:
  • Next:
    • Write your message here and send it to us

    Related products

    • MOXA EDS-308-MM-SC Unmanaged Industrial Ethernet Switch

      MOXA EDS-308-MM-SC Unmanaged Industrial Etherne...

      Features and Benefits Relay output warning for power failure and port break alarm Broadcast storm protection -40 to 75°C operating temperature range (-T models) Specifications Ethernet Interface 10/100BaseT(X) Ports (RJ45 connector) EDS-308/308-T: 8EDS-308-M-SC/308-M-SC-T/308-S-SC/308-S-SC-T/308-S-SC-80:7EDS-308-MM-SC/308...

      See more products >
    • MOXA EDS-P510A-8PoE-2GTXSFP-T Layer 2 Gigabit POE+ Managed Industrial Ethernet Switch

      MOXA EDS-P510A-8PoE-2GTXSFP-T Layer 2 Gigabit P...

      Features and Benefits 8 built-in PoE+ ports compliant with IEEE 802.3af/atUp to 36 W output per PoE+ port 3 kV LAN surge protection for extreme outdoor environments PoE diagnostics for powered-device mode analysis 2 Gigabit combo ports for high-bandwidth and long-distance communication Operates with 240 watts full PoE+ loading at -40 to 75°C Supports MXstudio for easy, visualized industrial network management V-ON...

      See more products >
    • MOXA MGate MB3480 Modbus TCP Gateway

      MOXA MGate MB3480 Modbus TCP Gateway

      Features and Benefits FeaSupports Auto Device Routing for easy configuration Supports route by TCP port or IP address for flexible deployment Converts between Modbus TCP and Modbus RTU/ASCII protocols 1 Ethernet port and 1, 2, or 4 RS-232/422/485 ports 16 simultaneous TCP masters with up to 32 simultaneous requests per master Easy hardware setup and configurationtures and Benefits ...

      See more products >
    • MOXA EDS-208-T Unmanaged Industrial Ethernet Switch

      MOXA EDS-208-T Unmanaged Industrial Ethernet Sw...

      Features and Benefits 10/100BaseT(X) (RJ45 connector), 100BaseFX (multi-mode, SC/ST connectors) IEEE802.3/802.3u/802.3x support Broadcast storm protection DIN-rail mounting ability -10 to 60°C operating temperature range Specifications Ethernet Interface Standards IEEE 802.3 for10BaseTIEEE 802.3u for 100BaseT(X) and 100Ba...

      See more products >
    • MOXA NPort 5110-T Industrial General Device Server

      MOXA NPort 5110-T Industrial General Device Server

      Features and Benefits Small size for easy installation  Real COM and TTY drivers for Windows, Linux, and macOS  Standard TCP/IP interface and versatile operation modes  Easy-to-use Windows utility for configuring multiple device servers  SNMP MIB-II for network management  Configure by Telnet, web browser, or Windows utility  Adjustable pull high/low resistor for RS-485 ports ...

      See more products >
    • MOXA EDS-408A-T Layer 2 Managed Industrial Ethernet Switch

      MOXA EDS-408A-T Layer 2 Managed Industrial Ethe...

      Features and Benefits Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and RSTP/STP for network redundancy IGMP Snooping, QoS, IEEE 802.1Q VLAN, and port-based VLAN supported Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01 PROFINET or EtherNet/IP enabled by default (PN or EIP models) Supports MXstudio for easy, visualized industrial network mana...

      See more products >
    Hit enter to search or ESC to close