MOXA MGate 5111 gateway
MGate 5111 industrial Ethernet gateways convert data from Modbus RTU/ASCII/TCP, EtherNet/IP, or PROFINET to PROFIBUS protocols. All models are protected by a rugged metal housing, are DIN-rail mountable, and offer built-in serial isolation.
The MGate 5111 Series has a user-friendly interface that lets you quickly set up protocol conversion routines for most applications, doing away with what were often time-consuming tasks in which users had to implement detailed parameter configurations one by one. With Quick Setup, you can easily access protocol conversion modes and finish the configuration in a few steps.
The MGate 5111 supports a web console and Telnet console for remote maintenance. Encryption communication functions, including HTTPS and SSH, are supported to provide better network security. In addition, system monitoring functions are provided to record network connections and system log events.
Converts Modbus, PROFINET, or EtherNet/IP to PROFIBUS
Supports PROFIBUS DP V0 slave
Supports Modbus RTU/ASCII/TCP master/client and slave/server
Supports EtherNet/IP Adapter
Supports PROFINET IO device
Effortless configuration via web-based wizard
Built-in Ethernet cascading for easy wiring
Embedded traffic monitoring/diagnostic information for easy troubleshooting
Status monitoring and fault protection for easy maintenance
microSD card for configuration backup/duplication and event logs
Supports redundant dual DC power inputs and 1 relay output
Serial port with 2 kV isolation protection
-40 to 75°C wide operating temperature models available
Security features based on IEC 62443
Related products
-
MOXA IMC-21GA-LX-SC-T Ethernet-to-Fiber Media C...
Features and Benefits Supports 1000Base-SX/LX with SC connector or SFP slot Link Fault Pass-Through (LFPT) 10K jumbo frame Redundant power inputs -40 to 75°C operating temperature range (-T models) Supports Energy-Efficient Ethernet (IEEE 802.3az) Specifications Ethernet Interface 10/100/1000BaseT(X) Ports (RJ45 connector...
-
MOXA ioLogik E2210 Universal Controller Smart E...
Features and Benefits Front-end intelligence with Click&Go control logic, up to 24 rules Active communication with MX-AOPC UA Server Saves time and wiring costs with peer-to-peer communications Supports SNMP v1/v2c/v3 Friendly configuration via web browser Simplifies I/O management with MXIO library for Windows or Linux Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments ...
-
MOXA EDR-G903 industrial secure router
Introduction The EDR-G903 is a high-performance, industrial VPN server with a firewall/NAT all-in-one secure router. It is designed for Ethernet-based security applications on critical remote control or monitoring networks, and it provides an Electronic Security Perimeter for the protection of critical cyber assets such as pumping stations, DCS, PLC systems on oil rigs, and water treatment systems. The EDR-G903 Series includes the follo...
-
MOXA UPort 1130I RS-422/485 USB-to-Serial Conve...
Features and Benefits 921.6 kbps maximum baudrate for fast data transmission Drivers provided for Windows, macOS, Linux, and WinCE Mini-DB9-female-to-terminal-block adapter for easy wiring LEDs for indicating USB and TxD/RxD activity 2 kV isolation protection (for “V' models) Specifications USB Interface Speed 12 Mbps USB Connector UP...
-
MOXA MGate 5101-PBM-MN Modbus TCP Gateway
Introduction The MGate 5101-PBM-MN gateway provides a communication portal between PROFIBUS devices (e.g. PROFIBUS drives or instruments) and Modbus TCP hosts. All models are protected with a rugged metallic casing, DIN-rail mountable, and offer optional built-in optical isolation. The PROFIBUS and Ethernet status LED indicators are provided for easy maintenance. The rugged design is suitable for industrial applications such as oil/gas, power...
-
MOXA ioMirror E3210 Universal Controller I/O
Introduction The ioMirror E3200 Series, which is designed as a cable-replacement solution to connect remote digital input signals to output signals over an IP network, provides 8 digital input channels, 8 digital output channels, and a 10/100M Ethernet interface. Up to 8 pairs of digital input and output signals can be exchanged over Ethernet with another ioMirror E3200 Series device, or can be sent to a local PLC or DCS controller. Ove...