MOXA IEX-402-SHDSL Industrial Managed Ethernet Extender
The IEX-402 is an entry-level industrial managed Ethernet extender designed with one 10/100BaseT(X) and one DSL port. The Ethernet extender provides a point-to-point extension over twisted copper wires based on the G.SHDSL or VDSL2 standard. The device supports data rates of up to 15.3 Mbps and a long transmission distance of up to 8 km for G.SHDSL connection; for VDSL2 connections, the data rate supports up to 100 Mbps and a long transmission distance of up to 3 km.
The IEX-402 Series is designed for use in harsh environments. The DIN-rail mount, wide operating temperature range (-40 to 75°C), and dual power inputs make it ideal for installation in industrial applications.
To simplify configuration, the IEX-402 uses CO/CPE auto-negotiation. By factory default, the device will automatically assign CPE status to one of each pair of IEX devices. In addition, Link Fault Pass-through (LFP) and network redundancy interoperability enhance the reliability and accessibility of communication networks. In addition, advanced managed and monitored functionality through MXview, including a virtual panel, improve the user experience for quick troubleshooting
Features and Benefits
Automatic CO/CPE negotiation reduces configuration time
Link Fault Pass-Through (LFPT) support and interoperable with Turbo Ring and Turbo Chain
LED indicators to simplify troubleshooting
Easy network management by web browser, Telnet/serial console, Windows utility, ABC-01, and MXview
Standard G.SHDSL data rate up to 5.7 Mbps, with up to 8 km transmission distance (performance varies by cable quality)
Moxa proprietary Turbo Speed connections up to 15.3 Mbps
Supports Link Fault Pass-Through (LFP) and Line-swap fast recovery
Supports SNMP v1/v2c/v3 for different levels of network management
Interoperable with Turbo Ring and Turbo Chain network redundancy
Support Modbus TCP protocol for device management and monitoring
Compatible with EtherNet/IP and PROFINET protocols for transparent transmission
IPv6 Ready
| Model 1 | MOXA IEX-402-SHDSL |
| Model 2 | MOXA IEX-402-SHDSL-T |
Related products
-
MOXA MGate 5114 1-port Modbus Gateway
Features and Benefits Protocol conversion between Modbus RTU/ASCII/TCP, IEC 60870-5-101, and IEC 60870-5-104 Supports IEC 60870-5-101 master/slave (balanced/unbalanced) Supports IEC 60870-5-104 client/server Supports Modbus RTU/ASCII/TCP master/client and slave/server Effortless configuration via web-based wizard Status monitoring and fault protection for easy maintenance Embedded traffic monitoring/diagnostic inf...
-
MOXA TCF-142-S-SC-T Industrial Serial-to-Fiber ...
Features and Benefits Ring and point-to-point transmission Extends RS-232/422/485 transmission up to 40 km with single-mode (TCF- 142-S) or 5 km with multi-mode (TCF-142-M) Decreases signal interference Protects against electrical interference and chemical corrosion Supports baudrates up to 921.6 kbps Wide-temperature models available for -40 to 75°C environments ...
-
MOXA ICF-1150I-M-SC Serial-to-Fiber Converter
Features and Benefits 3-way communication: RS-232, RS-422/485, and fiber Rotary switch to change the pull high/low resistor value Extends RS-232/422/485 transmission up to 40 km with single-mode or 5 km with multi-mode -40 to 85°C wide-temperature range models available C1D2, ATEX, and IECEx certified for harsh industrial environments Specifications ...
-
MOXA CBL-RJ45F9-150 Cable
Introduction Moxa’s serial cables extend the transmission distance for your multiport serial cards. It also expands the serial com ports for a serial connection. Features and Benefits Extend the transmission distance of serial signals Specifications Connector Board-side Connector CBL-F9M9-20: DB9 (fe...
-
MOXA ICF-1150I-M-ST Serial-to-Fiber Converter
Features and Benefits 3-way communication: RS-232, RS-422/485, and fiber Rotary switch to change the pull high/low resistor value Extends RS-232/422/485 transmission up to 40 km with single-mode or 5 km with multi-mode -40 to 85°C wide-temperature range models available C1D2, ATEX, and IECEx certified for harsh industrial environments Specifications ...
-
MOXA NPort 6610-8 Secure Terminal Server
Features and Benefits LCD panel for easy IP address configuration (standard temp. models) Secure operation modes for Real COM, TCP Server, TCP Client, Pair Connection, Terminal, and Reverse Terminal Nonstandard baudrates supported with high precision Port buffers for storing serial data when the Ethernet is offline Supports IPv6 Ethernet redundancy (STP/RSTP/Turbo Ring) with network module Generic serial com...