MOXA EDS-2018-ML-2GTXSFP-T Gigabit Unmanaged Ethernet Switch
2 Gigabit uplinks with flexible interface design for high-bandwidth data aggregationQoS supported to process critical data in heavy traffic
Relay output warning for power failure and port break alarm
IP30-rated metal housing
Redundant dual 12/24/48 VDC power inputs
-40 to 75°C operating temperature range (-T models)
Ethernet Interface
| 10/100BaseT(X) Ports (RJ45 connector) | 16 Auto MDI/MDI-X connection Full/Half duplex mode Auto negotiation speed |
| Combo Ports (10/100/1000BaseT(X) or 100/1000BaseSFP+) | 2 Auto negotiation speed Auto MDI/MDI-X connection Full/Half duplex mode |
| Standards | IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) IEEE 802.3ab for 1000BaseT(X) IEEE 802.3z for 1000BaseX IEEE 802.3x for flow control IEEE 802.1p for Class of ServiceIEEE 802.1p for Class of Service |
Power Parameters
| Connection | 1 removable 6-contact terminal block(s) |
| Input Current | 0.277 A @ 24 VDC |
| Input Voltage | 12/24/48 VDCRedundant dual inputs |
| Operating Voltage | 9.6 to 60 VDC |
| Overload Current Protection | Supported |
| Reverse Polarity Protection | Supported |
Physical Characteristics
| Housing | Metal |
| IP Rating | IP30 |
| Dimensions | 58 x 135 x 95 mm (2.28 x 5.31 x 3.74 in) |
| Weight | 683 g (1.51 lb) |
| Installation |
DIN-rail mounting |
Environmental Limits
| Operating Temperature | -40 to 75°C (-40 to 167°F) |
| Storage Temperature (package included) | -40 to 85°C (-40 to185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
EDS-2018-ML-2GTXSFP-T Available Models
| Model 1 | MOXA EDS-2018-ML-2GTXSFP-T |
| Model 2 | MOXA EDS-2018-ML-2GTXSFP |
Related products
-
MOXA EDS-2008-EL Industrial Ethernet Switch
Introduction The EDS-2008-EL series of industrial Ethernet switches have up to eight 10/100M copper ports, which are ideal for applications that require simple industrial Ethernet connections. To provide greater versatility for use with applications from different industries, the EDS-2008-EL Series also allows users to enable or disable the Quality of Service (QoS) function, and broadcast storm protection (BSP) wi...
-
MOXA TCF-142-M-SC-T Industrial Serial-to-Fiber ...
Features and Benefits Ring and point-to-point transmission Extends RS-232/422/485 transmission up to 40 km with single-mode (TCF- 142-S) or 5 km with multi-mode (TCF-142-M) Decreases signal interference Protects against electrical interference and chemical corrosion Supports baudrates up to 921.6 kbps Wide-temperature models available for -40 to 75°C environments ...
-
MOXA AWK-4131A-EU-T WLAN AP/Bridge/Client
Introduction The AWK-4131A IP68 outdoor industrial AP/bridge/client meets the growing need for faster data transmission speeds by supporting 802.11n technology and allowing 2X2 MIMO communication with a net data rate of up to 300 Mbps. The AWK-4131A is compliant with industrial standards and approvals covering operating temperature, power input voltage, surge, ESD, and vibration. The two redundant DC power inputs increase the ...
-
MOXA AWK-3252A Series Wireless AP/bridge/client
Introduction The AWK-3252A Series 3-in-1 industrial wireless AP/bridge/client is designed to meet the growing need for faster data transmission speeds through IEEE 802.11ac technology for aggregated data rates of up to 1.267 Gbps. The AWK-3252A is compliant with industrial standards and approvals covering operating temperature, power input voltage, surge, ESD, and vibration. The two redundant DC power inputs increase the reliability of the po...
-
MOXA EDS-G516E-4GSFP-T Gigabit Managed Industri...
Features and Benefits Up to 12 10/100/1000BaseT(X) ports and 4 100/1000BaseSFP portsTurbo Ring and Turbo Chain (recovery time < 50 ms @ 250 switches), and STP/RSTP/MSTP for network redundancy RADIUS, TACACS+, MAB Authentication, SNMPv3, IEEE 802.1X, MAC ACL, HTTPS, SSH, and sticky MAC-addresses to enhance network security Security features based on IEC 62443 EtherNet/IP, PROFINET, and Modbus TCP protocols suppo...
-
MOXA MGate 5118 Modbus TCP Gateway
Introduction The MGate 5118 industrial protocol gateways support the SAE J1939 protocol, which is based on CAN bus (Controller Area Network). SAE J1939 is used to implement communication and diagnostics among vehicle components, diesel engine generators, and compression engines, and is suitable for the heavy-duty truck industry and backup power systems. It is now common to use an engine control unit (ECU) to control these kinds of devic...