Weidmuller WQV 4/4 1054660000 Terminals Cross-connector
Weidmüller offers plug-in and screwed cross-connection systems for screw-connection
terminal blocks. The plug-in cross-connections feature easy handling and quick installation.
This saves a great deal of time during installation in comparison with screwed solutions. This also ensures that all poles always contact reliably.
Fitting and changing cross connections
The fitting and changing of cross-connections is a trouble-free and fast operation:
– Insert the cross-connection into the cross connection channel in the terminal...and press it fully home. (The cross-connection may not project from the channel.) Remove a cross-connection by simply prising it out with a screwdriver.
Shortening cross-connections
Cross-connections can be shortened in length using a suitable cutting tool, However, three contact elements must always be retained.
Breaking out contact elements
If one or more (max. 60 % for reasons of stability and temperature rise) of the contact elements are broken out of the cross-connections, terminals may be bypassed to suit the application.
Caution:
Contact elements must not be deformed!
Note: By using manually cut ZQV and crossconnections with blank cut edges (> 10 poles) the voltage reduces to 25 V.
Related products
-
MOXA EDS-508A Managed Industrial Ethernet Switch
Features and Benefits Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and STP/RSTP/MSTP for network redundancyTACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network security Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01 Supports MXstudio for easy, visualized industrial network management ...
-
WAGO 243-504 MICRO PUSH WIRE Connector
Date Sheet Connection data Connection points 4 Total number of potentials 1 Number of connection types 1 Number of levels 1 Connection 1 Connection technology PUSH WIRE® Actuation type Push-in Connectable conductor materials Copper Solid conductor 22 … 20 AWG Conductor diameter 0.6 … 0.8 mm / 22 … 20 AWG Conductor diameter (note) When using conductors of the same diameter, 0.5 mm (24 AWG) or 1 mm (18 AWG)...
-
WAGO 750-474 Analog Input Module
WAGO I/O System 750/753 Controller Decentralized peripherals for a variety of applications: WAGO's remote I/O system has more than 500 I/O modules, programmable controllers and communication modules to provide automation needs and all communication buses required. All features. Advantage: Supports the most communication buses – compatible with all standard open communication protocols and ETHERNET standards Wide range of I/O modules ...
-
Hirschmann MM3-4FXM2 Media Module For MICE Swit...
Description Product description Type: MM3-4FXM2 Part Number: 943764101 Availability: Last Order Date: December 31st, 2023 Port type and quantity: 4 x 100Base-FX, MM cable, SC sockets Network size - length of cable Multimode fiber (MM) 50/125 µm: 0 - 5000 m, 8 dB link budget at 1300 nm, A = 1 dB/km, 3 dB reserve, B = 800 MHz x km Multimode fiber (MM) 62.5/125 µm: 0 - 4000 m, 11 dB link budget at 1300 nm, A = 1 dB/km, 3...
-
Hirschmann SPIDER 8TX DIN Rail Switch
Introduction The switches in the SPIDER range allow economical solutions for a variety of industrial applications. We are sure you will find a switch that perfectly meets your needs with more than 10+ variants available. Installing is simply plug-and-play, no special IT skills are needed. LEDs on the front panel indicate the device and network status. The switches can also be viewed using the Hirschman network man...
-
Weidmuller PZ 3 0567300000 Pressing Tool
Weidmuller Crimping tools Crimping tools for wire end ferrules, with and without plastic collars Ratchet guarantees precise crimping Release option in the event of incorrect operation After stripping the insulation, a suitable contact or wire end ferrule can be crimped onto the end of the cable. Crimping forms a secure connection between conductor and contact and has largely replaced soldering. Crimping denotes the creation of a homogen...