WAGO 787-1226 Power supply
Related products
-
MOXA TCC-80 Serial-to-Serial Converter
Introduction The TCC-80/80I media converters provide complete signal conversion between RS-232 and RS-422/485, without requiring an external power source. The converters support both half-duplex 2-wire RS-485 and full-duplex 4-wire RS-422/485, either of which can be converted between RS-232’s TxD and RxD lines. Automatic data direction control is provided for RS-485. In this case, the RS-485 driver is enabled automatically whe...
-
WAGO 750-325 Fieldbus Coupler CC-Link
Description This fieldbus coupler connects the WAGO I/O System as a slave to the CC-Link fieldbus. The fieldbus coupler supports the CC-Link protocol versions V1.1. and V2.0. The fieldbus coupler detects all connected I/O modules and creates a local process image. This process image may include a mixed arrangement of analog (word-by-word data transfer) and digital (bit-by-bit data transfer) modules. The process image can be transferred ...
-
Weidmuller A3C 2.5 PE 1521670000 Terminal
Weidmuller’s A series terminal blocks characters Spring connection with PUSH IN technology (A-Series) Time saving 1.Mounting foot makes unlatching the terminal block easy 2. Clear distinction made between all functional areas 3.Easier marking and wiring Space saving design 1.Slim design creates a large amount of space in the panel 2.High wiring density despite less space being required on the terminal rail Safety...
-
Weidmuller WDU 10/ZR 1042400000 Feed-through Te...
Weidmuller W series terminal characters Whatever your requirements for the panel: our screw connection system with patented clamping yoke technology ensures the ultimate in contact safety. You can use both screw-in and plug-in cross-connections for potential distribution.Two conductors of the same diameter can also be connected in a single terminal point in accordance with UL1059.The screw connection has long bee...
-
Hrating 19 00 000 5082 Han CGM-M M20x1,5 D.6-12mm
Product Details Identification Category Accessories Series of hoods/housings Han® CGM-M Type of accessory Cable gland Technical characteristics Tightening torque ≤10 Nm (depending on the cable and the seal insert used) Wrench size 22 Limiting temperature -40 ... +100 °C Degree of protection acc. to IEC 60529 IP68 IP69 / IPX9K acc. to ISO 20653 Size M20 Clamping range 6 ... 12 mm Width across corners 24.4 mm ...
-
Hrating 09 31 006 2601 Han 6HsB-M-S
Product Details Identification Category Inserts Series Han® HsB Version Termination method Screw termination Gender Male Size 16 B With wire protection Yes Number of contacts 6 PE contact Yes Technical characteristics Conductor cross-section 1.5 ... 6 mm² Rated current 35 A Rated voltage conductor-earth 400 V Rated voltage conductor-conductor 690 V Rated impulse voltage 6 kV Pollution degree 3 Ra...