English
  • head_banner_01

WAGO 750-495/000-001 Power Measurement Module

  • WAGO 750-495/000-001 Power Measurement Module
  • WAGO 750-495/000-001 Power Measurement Module

Short Description:

WAGO 750-495/000-001 is 3-Phase Power Measurement; 690 VAC, 5 A

The 750-495 3-Phase Power Measurement Module measures electrical data in a three-phase supply network. The voltage is measured via network connection to L1, L2, L3 and N. The current of the three phases is fed to IL1, IL2, IL3 and IN (two clamping points each +,-) via current transformers or via Rogowski coils for the 750-495/000-002 module. The 750-495 Module transmits metrics (e.g., reactive/apparent/effective power, energy consumption, power factor, phase angle, frequency, over-/undervoltage) directly into the process image, without requiring high computing power from the controller. Both comprehensive metrics and harmonic analysis up to the 41st harmonic permit extensive network analysis via the fieldbus.

Metrics allow the operator to optimize the supply to a drive or machine, protecting the system from damage and failure. Insulation failures can be detected and prevented via current measurement performed in the neutral conductor. The 4-quadrant display indicates the type of load (inductive, capacitive) and whether it is an energy consumer or producer.


Product Detail

Product Tags

WAGO I/O System 750/753 Controller

 

Decentralized peripherals for a variety of applications: WAGO's remote I/O system has more than 500 I/O modules, programmable controllers and communication modules to provide automation needs and all communication buses required. All features.

 

Advantage:

  • Supports the most communication buses – compatible with all standard open communication protocols and ETHERNET standards
  • Wide range of I/O modules for nearly any application
  • Compact size also suitable for use in tight spaces
  • Suitable for international and national certifications used worldwide
  • Accessories for various marking systems and connection technologies
  • Fast, vibration-resistant and maintenance-free CAGE CLAMP® connection

Modular compact system for control cabinets

The high reliability of the WAGO I/O System 750/753 Series not only reduces wiring expenses but also prevents unplanned downtime and related service costs. The system also has other impressive features: In addition to being customizable, the I/O modules offer up to 16 channels to maximize valuable control cabinet space. In addition, the WAGO 753 Series uses plug-in connectors to speed up on-site installation.

Highest reliability and durability

WAGO I/O System 750/753 is designed and tested for use in the most demanding environments, such as those required in shipbuilding. In addition to significantly increased vibration resistance, significantly enhanced immunity to interference and a wide voltage fluctuation range, CAGE CLAMP® spring-loaded connections also ensure continuous operation.

Maximum communication bus independence

Communication modules connect the WAGO I/O System 750/753 to higher-level control systems and support all standard fieldbus protocols and ETHERNET standard. The individual parts of the I/O System are perfectly coordinated with each other and can be integrated into scalable control solutions with 750 Series controllers, PFC100 controllers and PFC200 controllers. e!COCKPIT (CODESYS 3) and WAGO I/O-PRO (Based on CODESYS 2) The engineering environment can be used for configuration, programming, diagnostics and visualization.

Maximum flexibility

More than 500 different I/O modules with 1, 2, 4, 8 and 16 channels are available for digital and analog input/output signals to meet the various needs of different industries, including functional blocks and technology modules Group, modules for Ex applications,RS-232 interfaceFunctional safety and more are  AS Interface.

  • Previous:
  • Next:
    • Write your message here and send it to us

    Related products

    • WAGO 750-475 Analog Input Module

      WAGO 750-475 Analog Input Module

      WAGO I/O System 750/753 Controller   Decentralized peripherals for a variety of applications: WAGO's remote I/O system has more than 500 I/O modules, programmable controllers and communication modules to provide automation needs and all communication buses required. All features.   Advantage: Supports the most communication buses – compatible with all standard open communication protocols and ETHERNET standards Wide range of I/O modules ...

      See more products >
    • WAGO 750-377/025-000 Fieldbus Coupler PROFINET IO

      WAGO 750-377/025-000 Fieldbus Coupler PROFINET IO

      Description   This fieldbus coupler connects the WAGO I/O System 750 to PROFINET IO (open, real-time Industrial ETHERNET automation standard). The coupler identifies the connected I/O modules and creates local process images for maximum two I/O controllers and one I/O supervisor according to preset configurations. This process image may include a mixed arrangement of analog (word-by-word data transfer) or complex modules and digital (bit-...

      See more products >
    • WAGO 750-516 Digital Ouput

      WAGO 750-516 Digital Ouput

      Physical data   Width 12 mm / 0.472 inches Height 100 mm / 3.937 inches Depth 69.8 mm / 2.748 inches Depth from upper-edge of DIN-rail 62.6 mm / 2.465 inches     WAGO I/O System 750/753 Controller   Decentralized peripherals for a variety of applications: WAGO's remote I/O system has more than 500 I/O modules, programmable controllers and communication modules to provide ...

      See more products >
    • WAGO 750-465 Analog Input Module

      WAGO 750-465 Analog Input Module

      WAGO I/O System 750/753 Controller   Decentralized peripherals for a variety of applications: WAGO's remote I/O system has more than 500 I/O modules, programmable controllers and communication modules to provide automation needs and all communication buses required. All features.   Advantage: Supports the most communication buses – compatible with all standard open communication protocols and ETHERNET standards Wide range of I/O modules ...

      See more products >
    • WAGO 750-303 Fieldbus Coupler PROFIBUS DP

      WAGO 750-303 Fieldbus Coupler PROFIBUS DP

      Description   This fieldbus coupler connects the WAGO I/O System as a slave to the PROFIBUS fieldbus. The fieldbus coupler detects all connected I/O modules and creates a local process image. This process image may include a mixed arrangement of analog (word-by-word data transfer) and digital (bit-by-bit data transfer) modules. The process image can be transferred via the PROFIBUS fieldbus to the memory of the control system. The local pr...

      See more products >
    • WAGO 750-823 Controller EtherNet/IP

      WAGO 750-823 Controller EtherNet/IP

      Description   This controller can be used as a programmable controller within EtherNet/IP networks in conjunction with the WAGO I/O System. The controller detects all connected I/O modules and creates a local process image. This process image may include a mixed arrangement of analog (word-by-word data transfer) and digital (bit-by-bit data transfer) modules. Two ETHERNET interfaces and an integrated switch allow the fieldbus to be wired ...

      See more products >
    Hit enter to search or ESC to close