MOXA TCC-80 Serial-to-Serial Converter
The TCC-80/80I media converters provide complete signal conversion between RS-232 and RS-422/485, without requiring an external power source. The converters support both half-duplex 2-wire RS-485 and full-duplex 4-wire RS-422/485, either of which can be converted between RS-232’s TxD and RxD lines.
Automatic data direction control is provided for RS-485. In this case, the RS-485 driver is enabled automatically when the circuitry senses the TxD output from the RS-232 signal. This means that no programming effort is required to control the transmission direction of the RS-485 signal.
Port Power Over RS-232
The RS-232 port of the TCC-80/80I is a DB9 female socket that can connect directly to the host PC, with power drawn from the TxD line. Regardless of whether the signal is high or low, the TCC-80/80I can obtain enough power from the data line.
External power source supported but not required
Compact size
Converts RS-422, and both 2-wire and 4-wire RS-485
RS-485 automatic data direction control
Automatic baudrate detection
Built-in 120-ohm termination resistors
2.5 kV isolation (for TCC-80I only)
LED port power indicator
Related products
-
MOXA MGate MB3660-16-2AC Modbus TCP Gateway
Features and Benefits Supports Auto Device Routing for easy configuration Supports route by TCP port or IP address for flexible deployment Innovative Command Learning for improving system performance Supports agent mode for high performance through active and parallel polling of serial devices Supports Modbus serial master to Modbus serial slave communications 2 Ethernet ports with the same IP or dual IP addresses...
-
MOXA EDS-P510A-8PoE-2GTXSFP-T Layer 2 Gigabit P...
Features and Benefits 8 built-in PoE+ ports compliant with IEEE 802.3af/atUp to 36 W output per PoE+ port 3 kV LAN surge protection for extreme outdoor environments PoE diagnostics for powered-device mode analysis 2 Gigabit combo ports for high-bandwidth and long-distance communication Operates with 240 watts full PoE+ loading at -40 to 75°C Supports MXstudio for easy, visualized industrial network management V-ON...
-
MOXA EDS-308-SS-SC Unmanaged Industrial Etherne...
Features and Benefits Relay output warning for power failure and port break alarm Broadcast storm protection -40 to 75°C operating temperature range (-T models) Specifications Ethernet Interface 10/100BaseT(X) Ports (RJ45 connector) EDS-308/308-T: 8EDS-308-M-SC/308-M-SC-T/308-S-SC/308-S-SC-T/308-S-SC-80:7EDS-308-MM-SC/308...
-
MOXA IMC-21GA Ethernet-to-Fiber Media Converter
Features and Benefits Supports 1000Base-SX/LX with SC connector or SFP slot Link Fault Pass-Through (LFPT) 10K jumbo frame Redundant power inputs -40 to 75°C operating temperature range (-T models) Supports Energy-Efficient Ethernet (IEEE 802.3az) Specifications Ethernet Interface 10/100/1000BaseT(X) Ports (RJ45 connector...
-
MOXA EDS-2010-ML-2GTXSFP 8+2G-port Gigabit Unma...
Introduction The EDS-2010-ML series of industrial Ethernet switches have eight 10/100M copper ports and two 10/100/1000BaseT(X) or 100/1000BaseSFP combo ports, which are ideal for applications that require high-bandwidth data convergence. Moreover, to provide greater versatility for use with applications from different industries, the EDS-2010-ML Series also allows users to enable or disable the Quality of Service...
-
MOXA AWK-1137C Industrial Wireless Mobile Appli...
Introduction The AWK-1137C is an ideal client solution for industrial wireless mobile applications. It enables WLAN connections for both Ethernet and serial devices, and is compliant with industrial standards and approvals covering operating temperature, power input voltage, surge, ESD, and vibration. The AWK-1137C can operate on either the 2.4 or 5 GHz bands, and is backwards-compatible with existing 802.11a/b/g ...