MOXA NPort IA-5150A industrial automation device server
2 Ethernet ports with the same IP or dual IP addresses for network redundancy
C1D2, ATEX, and IECEx certified for harsh industrial environments
Cascading Ethernet ports for easy wiring
Enhanced surge protection for serial, LAN, and power
Screw-type terminal blocks for secure power/serial connections
Redundant DC power inputs
Warnings and alerts by relay output and email
2 kV isolation for serial signals (isolation models)
-40 to 75°C operating temperature range (-T models)
Related products
-
MOXA MGate MB3280 Modbus TCP Gateway
Features and Benefits FeaSupports Auto Device Routing for easy configuration Supports route by TCP port or IP address for flexible deployment Converts between Modbus TCP and Modbus RTU/ASCII protocols 1 Ethernet port and 1, 2, or 4 RS-232/422/485 ports 16 simultaneous TCP masters with up to 32 simultaneous requests per master Easy hardware setup and configurationtures and Benefits ...
-
MOXA PT-7528 Series Managed Rackmount Ethernet ...
Introduction The PT-7528 Series is designed for power substation automation applications that operate in extremely harsh environments. The PT-7528 Series supports Moxa’s Noise Guard technology, is compliant with IEC 61850-3, and its EMC immunity exceeds IEEE 1613 Class 2 standards to ensure zero packet loss while transmitting at wire speed. The PT-7528 Series also features critical packet prioritization (GOOSE and SMVs), a built-in MMS serve...
-
MOXA EDS-408A Layer 2 Managed Industrial Ethern...
Features and Benefits Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and RSTP/STP for network redundancy IGMP Snooping, QoS, IEEE 802.1Q VLAN, and port-based VLAN supported Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01 PROFINET or EtherNet/IP enabled by default (PN or EIP models) Supports MXstudio for easy, visualized industrial network mana...
-
MOXA EDS-P510A-8PoE-2GTXSFP-T Layer 2 Gigabit P...
Features and Benefits 8 built-in PoE+ ports compliant with IEEE 802.3af/atUp to 36 W output per PoE+ port 3 kV LAN surge protection for extreme outdoor environments PoE diagnostics for powered-device mode analysis 2 Gigabit combo ports for high-bandwidth and long-distance communication Operates with 240 watts full PoE+ loading at -40 to 75°C Supports MXstudio for easy, visualized industrial network management V-ON...
-
MOXA NPort 5232 2-port RS-422/485 Industrial Ge...
Features and Benefits Compact design for easy installation Socket modes: TCP server, TCP client, UDP Easy-to-use Windows utility for configuring multiple device servers ADDC (Automatic Data Direction Control) for 2-wire and 4-wire RS-485 SNMP MIB-II for network management Specifications Ethernet Interface 10/100BaseT(X) Ports (RJ45 connect...
-
Moxa MXview Industrial Network Management Software
Specifications Hardware Requirements CPU 2 GHz or faster dual-core CPU RAM 8 GB or higher Hardware Disk Space MXview only: 10 GBWith MXview Wireless module: 20 to 30 GB2 OS Windows 7 Service Pack 1 (64-bit)Windows 10 (64-bit)Windows Server 2012 R2 (64-bit) Windows Server 2016 (64-bit) Windows Server 2019 (64-bit) Management Supported Interfaces SNMPv1/v2c/v3 and ICMP Supported Devices AWK Products AWK-1121 ...