• head_banner_01

MOXA MGate 5109 1-port Modbus Gateway

Short Description:

The MGate 5109 is an industrial Ethernet gateway for Modbus RTU/ASCII/TCP and DNP3 serial/TCP/UDP protocol conversion. All models are protected with a rugged metallic casing, are DIN-rail mountable, and offer built-in serial isolation. The MGate 5109 supports transparent mode to easily integrate Modbus TCP to Modbus RTU/ASCII networks or DNP3 TCP/UDP to DNP3 serial networks. The MGate 5109 also supports agent mode to exchange data between Modbus and DNP3 networks or to act as a data concentrator for multiple Modbus slaves or multiple DNP3 outstations. The rugged design is suitable for industrial applications such as power, oil and gas, and water and wastewater.


Product Detail

Product Tags

Features and Benefits

Supports Modbus RTU/ASCII/TCP master/client and slave/server
Supports DNP3 serial/TCP/UDP master and outstation (Level 2)
DNP3 master mode supports up to 26600 points
Supports time-synchronization through DNP3
Effortless configuration via web-based wizard
Built-in Ethernet cascading for easy wiring
Embedded traffic monitoring/diagnostic information for easy troubleshooting
microSD card for configuration backup/duplication and event logs
Status monitoring and fault protection for easy maintenance
Redundant dual DC power inputs and relay output
-40 to 75°C wide operating temperature models available
Serial port with 2 kV isolation protection
Security features based on IEC 62443

Specifications

Ethernet Interface

10/100BaseT(X) Ports (RJ45 connector) 2
Auto MDI/MDI-X connection
Magnetic Isolation Protection  1.5 kV (built-in)

Ethernet Software Features

Industrial Protocols Modbus TCP Client (Master), Modbus TCP Server (Slave), DNP3 TCP Master, DNP3 TCP Outstation
Configuration Options Web Console (HTTP/HTTPS), Device Search Utility (DSU), Telnet Console
Management ARP, DHCP Client, DNS, HTTP, HTTPS, SMTP, SNMP Trap, SNMPv1/v2c/v3, TCP/IP, Telnet, SSH, UDP, NTP Client
MIB RFC1213, RFC1317
Time Management NTP Client

Security Functions

Authentication Local database
Encryption HTTPS, AES-128, AES-256, SHA-256
Security Protocols SNMPv3 SNMPv2c Trap HTTPS (TLS 1.3)

Power Parameters

Input Voltage 12to48 VDC
Input Current 455 mA@12VDC
Power Connector Screw-fastened Euroblock terminal

Relays

Contact Current Rating Resistive load: 2A@30 VDC

Physical Characteristics

Housing Metal
IP Rating IP30
Dimensions 36x105x140 mm (1.42x4.14x5.51 in)
Weight 507g(1.12lb)

Environmental Limits

Operating Temperature MGate 5109: 0 to 60°C (32 to 140°F)MGate 5109-T:-40 to 75°C (-40 to 167°F)
Storage Temperature (package included) -40 to 85°C (-40 to185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)

MOXA MGate 5109 Available Models

Model 1 MOXA MGate 5109
Model 2 MOXA MGate 5109-T

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • MOXA EDS-G516E-4GSFP-T Gigabit Managed Industrial Ethernet Switch

      MOXA EDS-G516E-4GSFP-T Gigabit Managed Industri...

      Features and Benefits Up to 12 10/100/1000BaseT(X) ports and 4 100/1000BaseSFP portsTurbo Ring and Turbo Chain (recovery time < 50 ms @ 250 switches), and STP/RSTP/MSTP for network redundancy RADIUS, TACACS+, MAB Authentication, SNMPv3, IEEE 802.1X, MAC ACL, HTTPS, SSH, and sticky MAC-addresses to enhance network security Security features based on IEC 62443 EtherNet/IP, PROFINET, and Modbus TCP protocols suppo...

    • MOXA ICF-1150I-M-SC Serial-to-Fiber Converter

      MOXA ICF-1150I-M-SC Serial-to-Fiber Converter

      Features and Benefits 3-way communication: RS-232, RS-422/485, and fiber Rotary switch to change the pull high/low resistor value Extends RS-232/422/485 transmission up to 40 km with single-mode or 5 km with multi-mode -40 to 85°C wide-temperature range models available C1D2, ATEX, and IECEx certified for harsh industrial environments Specifications ...

    • MOXA IMC-21A-M-ST Industrial Media Converter

      MOXA IMC-21A-M-ST Industrial Media Converter

      Features and Benefits Multi-mode or single-mode, with SC or ST fiber connector Link Fault Pass-Through (LFPT) -40 to 75°C operating temperature range (-T models) DIP switches to select FDX/HDX/10/100/Auto/Force Specifications Ethernet Interface 10/100BaseT(X) Ports (RJ45 connector) 1 100BaseFX Ports (multi-mode SC conne...

    • MOXA EDS-208-T Unmanaged Industrial Ethernet Switch

      MOXA EDS-208-T Unmanaged Industrial Ethernet Sw...

      Features and Benefits 10/100BaseT(X) (RJ45 connector), 100BaseFX (multi-mode, SC/ST connectors) IEEE802.3/802.3u/802.3x support Broadcast storm protection DIN-rail mounting ability -10 to 60°C operating temperature range Specifications Ethernet Interface Standards IEEE 802.3 for10BaseTIEEE 802.3u for 100BaseT(X) and 100Ba...

    • MOXA IMC-21GA-LX-SC Ethernet-to-Fiber Media Converter

      MOXA IMC-21GA-LX-SC Ethernet-to-Fiber Media Con...

      Features and Benefits Supports 1000Base-SX/LX with SC connector or SFP slot Link Fault Pass-Through (LFPT) 10K jumbo frame Redundant power inputs -40 to 75°C operating temperature range (-T models) Supports Energy-Efficient Ethernet (IEEE 802.3az) Specifications Ethernet Interface 10/100/1000BaseT(X) Ports (RJ45 connector...

    • MOXA UPort 407 Industrial-Grade USB Hub

      MOXA UPort 407 Industrial-Grade USB Hub

      Introduction   The UPort® 404 and UPort® 407 are industrial-grade USB 2.0 hubs that expand 1 USB port into 4 and 7 USB ports, respectively. The hubs are designed to provide true USB 2.0 Hi-Speed 480 Mbps data transmission rates through each port, even for heavy-load applications. The UPort® 404/407 have received USB-IF Hi-Speed certification, which is an indication that both products are reliable, high-quality USB 2.0 hubs. In addition, t...