• head_banner_01

MOXA ioLogik E2210 Universal Controller Smart Ethernet Remote I/O

Short Description:

Moxa’s ioLogik E2200 Series Ethernet Remote I/O is a PC-based data acquisition and control device that uses proactive, event-based reporting to control I/O devices and features the Click&Go programming interface. Unlike traditional PLCs, which are passive and must poll for data, Moxa’s ioLogik E2200 Series will, when paired with our MX-AOPC UA Server, communicate with SCADA systems using active messaging that is pushed to the server only when state changes or configured events occur. Additionally, the ioLogik E2200 features SNMP for communications and control using an NMS (Network Management System), allowing IT professionals to configure the device to push I/O status reports according to configured specifications. This report-by-exception approach, which is new to PC-based monitoring, requires far less bandwidth than traditional polling methods.


Product Detail

Product Tags

Features and Benefits

Front-end intelligence with Click&Go control logic, up to 24 rules
Active communication with MX-AOPC UA Server
Saves time and wiring costs with peer-to-peer communications
Supports SNMP v1/v2c/v3
Friendly configuration via web browser
Simplifies I/O management with MXIO library for Windows or Linux
Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments

Specifications

Control Logic

Language Click&Go

Input/Output Interface

Digital Input Channels ioLogikE2210Series: 12 ioLogikE2212Series:8 ioLogikE2214Series:6
Digital Output Channels ioLogik E2210/E2212 Series: 8ioLogik E2260/E2262 Series: 4
Configurable DIO Channels (by software) ioLogik E2212 Series: 4ioLogik E2242 Series: 12
Relay Channels ioLogikE2214Series:6
Analog Input Channels ioLogik E2240 Series: 8ioLogik E2242 Series: 4
Analog Output Channels ioLogik E2240 Series: 2
RTD Channels ioLogik E2260 Series: 6
Thermocouple Channels ioLogik E2262 Series: 8
Buttons Reset button
Rotary Switch 0to9
Isolation 3kVDC or2kVrms

Digital Inputs

Connector Screw-fastened Euroblock terminal
Sensor Type ioLogik E2210 Series: Dry Contact and Wet Contact (NPN)ioLogik E2212/E2214/E2242 Series: Dry Contact and Wet Contact (NPN or PNP)
I/O Mode DI or event counter
Dry Contact On: short to GNDOff: open
Wet Contact (DI to GND) On: 0 to 3 VDC Off: 10 to 30 VDC
Counter Frequency 900 Hz
Digital Filtering Time Interval Software configurable
Points per COM ioLogik E2210 Series: 12 channels ioLogik E2212/E2242 Series: 6 channels ioLogik E2214 Series: 3 channels

Power Parameters

Power Connector Screw-fastened Euroblock terminal
No. of Power Inputs 1
Input Voltage 12to36 VDC
Power Consumption ioLogik E2210 Series: 202 mA @ 24 VDC ioLogik E2212 Series: 136 mA@ 24 VDC ioLogik E2214Series: 170 mA@ 24 VDC ioLogik E2240 Series: 198 mA@ 24 VDC ioLogik E2242 Series: 178 mA@ 24 VDC ioLogik E2260 Series: 95 mA @ 24 VDC ioLogik E2262 Series: 160 mA @ 24 VDC

Physical Characteristics

Dimensions 115x79x 45.6 mm (4.53 x3.11 x1.80 in)
Weight 250 g (0.55 lb)
Installation DIN-rail mounting, Wall mounting
Wiring I/O cable, 16to 26AWG Power cable, 16to26 AWG
Housing Plastic

Environmental Limits

Operating Temperature Standard Models: -10 to 60°C (14to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature (package included) -40 to 85°C (-40 to185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Altitude 2000 m

MOXA ioLogik E2210 Available Models

Model Name Input/Output Interface Digital Input Sensor Type Analog Input Range Operating Temp.
ioLogikE2210 12xDI,8xDO Wet Contact (NPN), Dry Contact - -10 to 60°C
ioLogikE2210-T 12xDI,8xDO Wet Contact (NPN), Dry Contact - -40 to 75°C
ioLogik E2212 8xDI,4xDIO,8xDO Wet Contact (NPN or PNP), Dry Contact - -10 to 60°C
ioLogikE2212-T 8 x DI, 4 x DIO, 8 x DO Wet Contact (NPN or PNP), Dry Contact - -40 to 75°C
ioLogikE2214 6x DI, 6x Relay Wet Contact (NPN or PNP), Dry Contact - -10 to 60°C
ioLogikE2214-T 6x DI, 6x Relay Wet Contact (NPN or PNP), Dry Contact - -40 to 75°C
ioLogik E2240 8xAI, 2xAO - ±150 mV, ±500 mV, ±5 V, ±10 V, 0-20 mA, 4-20 mA -10 to 60°C
ioLogik E2240-T 8xAI,2xAO - ±150 mV, ±500 mV, ±5 V, ±10 V, 0-20 mA, 4-20 mA -40 to 75°C
ioLogik E2242 12xDIO,4xAI Wet Contact (NPN or PNP), Dry Contact ±150 mV, 0-150 mV, ±500 mV, 0-500 mV, ±5 V, 0-5 V, ±10 V, 0-10 V, 0-20 mA, 4-20 mA -10 to 60°C
ioLogik E2242-T 12xDIO,4xAI Wet Contact (NPN or PNP), Dry Contact ±150 mV, 0-150 mV, ±500 mV, 0-500 mV, ±5 V, 0-5 V, ±10 V, 0-10 V, 0-20 mA, 4-20 mA -40 to 75°C
ioLogik E2260 4 x DO, 6 x RTD - - -10 to 60°C
ioLogik E2260-T 4 x DO, 6 x RTD - - -40 to 75°C
ioLogik E2262 4xDO,8xTC - - -10 to 60°C
ioLogik E2262-T 4xDO,8xTC - - -40 to 75°C

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • MOXA MGate MB3170I Modbus TCP Gateway

      MOXA MGate MB3170I Modbus TCP Gateway

      Features and Benefits Supports Auto Device Routing for easy configuration Supports route by TCP port or IP address for flexible deployment Connects up to 32 Modbus TCP servers Connects up to 31 or 62 Modbus RTU/ASCII slaves Accessed by up to 32 Modbus TCP clients (retains 32 Modbus requests for each Master) Supports Modbus serial master to Modbus serial slave communications Built-in Ethernet cascading for easy wir...

    • MOXA IEX-402-SHDSL Industrial Managed Ethernet Extender

      MOXA IEX-402-SHDSL Industrial Managed Ethernet ...

      Introduction The IEX-402 is an entry-level industrial managed Ethernet extender designed with one 10/100BaseT(X) and one DSL port. The Ethernet extender provides a point-to-point extension over twisted copper wires based on the G.SHDSL or VDSL2 standard. The device supports data rates of up to 15.3 Mbps and a long transmission distance of up to 8 km for G.SHDSL connection; for VDSL2 connections, the data rate supp...

    • MOXA ioLogik R1240 Universal Controller I/O

      MOXA ioLogik R1240 Universal Controller I/O

      Introduction   The ioLogik R1200 Series RS-485 serial remote I/O devices are perfect for establishing a cost-effective, dependable, and easy-to-maintain remote process control I/O system. Remote serial I/O products offer process engineers the benefit of simple wiring, as they only require two wires to communicate with the controller and other RS-485 devices while adopting the EIA/TIA RS-485 communication protocol to transmit and receive d...

    • MOXA ioLogik E2240 Universal Controller Smart Ethernet Remote I/O

      MOXA ioLogik E2240 Universal Controller Smart E...

      Features and Benefits Front-end intelligence with Click&Go control logic, up to 24 rules Active communication with MX-AOPC UA Server Saves time and wiring costs with peer-to-peer communications Supports SNMP v1/v2c/v3 Friendly configuration via web browser Simplifies I/O management with MXIO library for Windows or Linux Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments ...

    • MOXA IMC-21A-M-SC Industrial Media Converter

      MOXA IMC-21A-M-SC Industrial Media Converter

      Features and Benefits Multi-mode or single-mode, with SC or ST fiber connector Link Fault Pass-Through (LFPT) -40 to 75°C operating temperature range (-T models) DIP switches to select FDX/HDX/10/100/Auto/Force Specifications Ethernet Interface 10/100BaseT(X) Ports (RJ45 connector)  1 100BaseFX Ports (multi-mode SC conn...

    • MOXA NPort 6650-32 Terminal Server

      MOXA NPort 6650-32 Terminal Server

      Features and Benefits Moxa's terminal servers are equipped with the specialized functions and security features needed to establish reliable terminal connections to a network, and can connect various devices such as terminals, modems, data switches, mainframe computers, and POS devices to make them available to network hosts and process.   LCD panel for easy IP address configuration (standard temp. models)  Secure...