MOXA EDS-516A 16-port Managed Industrial Ethernet Switch
Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and STP/RSTP/MSTP for network redundancyTACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network security
Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01
Supports MXstudio for easy, visualized industrial network management
Input/Output Interface
| Alarm Contact Channels | Resistive load: 1 A @ 24 VDC |
| Digital Inputs | +13 to +30 V for state 1-30 to +3 V for state 0 Max. input current: 8 mA |
Ethernet Interface
| 10/100BaseT(X) Ports (RJ45 connector) | EDS-516A Series: 16EDS-516A-MM-SC/MM-ST Series: 14All models support:Auto negotiation speed
Full/Half duplex mode Auto MDI/MDI-X connection |
| 100BaseFX Ports (multi-mode SC connector) | EDS-516A-MM-SC Series: 2 |
| 100BaseFX Ports (multi-mode ST connector) | EDS-516A-MM-ST Series: 2 |
Power Parameters
| Connection | 2 removable 6-contact terminal block(s) |
| Input Voltage | 24VDC, Redundant dual inputs |
| Operating Voltage | 12to45 VDC |
| Input Current | EDS-516A Series: 0.35 A@24 VDC EDS-516A-MM-SC/MM-ST Series: 0.44 A@24 VDC |
| Overload Current Protection | Supported |
| Reverse Polarity Protection | Supported |
Physical Characteristics
| Housing | Metal |
| IP Rating | IP30 |
| Dimensions | 94x135x142.7 mm (3.7 x5.31 x5.62 in) |
| Weight | 1586g(3.50 lb) |
| Installation | DIN-rail mounting, Wall mounting (with optional kit) |
Environmental Limits
| Operating Temperature | Standard Models: 0 to 60°C (32 to 140°F)Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Storage Temperature (package included) | -40 to 85°C (-40 to185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
MOXA EDS-516A Available Models
| Model 1 | MOXA EDS-516A |
| Model 2 | MOXA EDS-516A-MM-SC |
| Model 3 | MOXA EDS-516A-MM-ST |
| Model 4 | MOXA EDS-516A-MM-SC-T |
| Model 5 | MOXA EDS-516A-MM-ST-T |
| Model 6 | MOXA EDS-516A-T |
Related products
-
MOXA EDS-510A-3SFP-T Layer 2 Managed Industrial...
Features and Benefits 2 Gigabit Ethernet ports for redundant ring and 1 Gigabit Ethernet port for uplink solutionTurbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), RSTP/STP, and MSTP for network redundancy TACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network security Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01 ...
-
MOXA MGate 5119-T Modbus TCP Gateway
Introduction The MGate 5119 is an industrial Ethernet gateway with 2 Ethernet ports and 1 RS-232/422/485 serial port. To integrate Modbus, IEC 60870-5-101, and IEC 60870-5-104 devices with an IEC 61850 MMS network, use the MGate 5119 as a Modbus master/client, IEC 60870-5-101/104 master, and DNP3 serial/TCP master to collect and exchange data with IEC 61850 MMS systems. Easy Configuration via SCL Generator The MGate 5119 as an IEC 61850...
-
MOXA MGate MB3180 Modbus TCP Gateway
Features and Benefits FeaSupports Auto Device Routing for easy configuration Supports route by TCP port or IP address for flexible deployment Converts between Modbus TCP and Modbus RTU/ASCII protocols 1 Ethernet port and 1, 2, or 4 RS-232/422/485 ports 16 simultaneous TCP masters with up to 32 simultaneous requests per master Easy hardware setup and configurationtures and Benefits ...
-
MOXA TCF-142-M-ST-T Industrial Serial-to-Fiber ...
Features and Benefits Ring and point-to-point transmission Extends RS-232/422/485 transmission up to 40 km with single-mode (TCF- 142-S) or 5 km with multi-mode (TCF-142-M) Decreases signal interference Protects against electrical interference and chemical corrosion Supports baudrates up to 921.6 kbps Wide-temperature models available for -40 to 75°C environments ...
-
MOXA MGate 5217I-600-T Modbus TCP Gateway
Introduction The MGate 5217 Series comprise 2-port BACnet gateways that can convert Modbus RTU/ACSII/TCP Server (Slave) devices to BACnet/IP Client system or BACnet/IP Server devices to Modbus RTU/ACSII/TCP Client (Master) system. Depending on the size and scale of the network, you can use the 600-point or 1200-point gateway model. All models are rugged, DIN-rail mountable, operate in wide temperatures, and offer built-in 2-kV isolation...
-
MOXA ICF-1180I-S-ST Industrial PROFIBUS-to-fibe...
Features and Benefits Fiber-cable test function validates fiber communication Auto baudrate detection and data speed of up to 12 Mbps PROFIBUS fail-safe prevents corrupted datagrams in functioning segments Fiber inverse feature Warnings and alerts by relay output 2 kV galvanic isolation protection Dual power inputs for redundancy (Reverse power protection) Extends PROFIBUS transmission distance up to 45 km Wide-te...