MOXA EDS-316-SS-SC-T 16-port Unmanaged Industrial Ethernet Switch
Relay output warning for power failure and port break alarm
Broadcast storm protection
-40 to 75°C operating temperature range (-T models)
Ethernet Interface
| 10/100BaseT(X) Ports (RJ45 connector) | EDS-316 Series: 16 EDS-316-MM-SC/MM-ST/MS-SC/SS-SC Series, EDS-316-SS-SC-80: 14 EDS-316-M-SC/M-ST/S-SC Series: 15All models support: Auto negotiation speed Full/Half duplex mode Auto MDI/MDI-X connection |
| 100BaseFX Ports (multi-mode SC connector) | EDS-316-M-SC: 1 EDS-316-M-SC-T: 1 EDS-316-MM-SC: 2 EDS-316-MM-SC-T: 2 EDS-316-MS-SC: 1 |
| 100BaseFX Ports (multi-mode ST connector) | EDS-316-M-ST Series: 1 EDS-316-MM-ST Series: 2 |
| 100BaseFX Ports (single-mode SC connector) | EDS-316-MS-SC, EDS-316-S-SC Series: 1 EDS-316-SS-SC Series: 2 |
| 100BaseFX Ports (single-mode SC connector, 80 km | EDS-316-SS-SC-80: 2 |
| Standards | IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) and 100BaseFX IEEE 802.3x for flow control |
Physical characteristics
| Installation | DIN-rail mountingWall mounting (with optional kit) |
| IP Rating | IP30 |
| Weight | 1140 g (2.52 lb) |
| Housing | Metal |
| Dimensions | 80.1 x 135 x 105 mm (3.15 x 5.31 x 4.13 in) |
MOXA EDS-316-SS-SC-T Available Models
| Model 1 | MOXA EDS-316 |
| Model 2 | MOXA EDS-316-MM-SC |
| Model 3 | MOXA EDS-316-MM-ST |
| Model 4 | MOXA EDS-316-M-SC |
| Model 5 | MOXA EDS-316-MS-SC |
| Model 6 | MOXA EDS-316-M-ST |
| Model 7 | MOXA EDS-316-S-SC |
| Model 8 | MOXA EDS-316-SS-SC |
Related products
-
MOXA ioLogik R1240 Universal Controller I/O
Introduction The ioLogik R1200 Series RS-485 serial remote I/O devices are perfect for establishing a cost-effective, dependable, and easy-to-maintain remote process control I/O system. Remote serial I/O products offer process engineers the benefit of simple wiring, as they only require two wires to communicate with the controller and other RS-485 devices while adopting the EIA/TIA RS-485 communication protocol to transmit and receive d...
-
MOXA EDS-208A-M-SC 8-port Compact Unmanaged Ind...
Features and Benefits 10/100BaseT(X) (RJ45 connector), 100BaseFX (multi/single-mode, SC or ST connector) Redundant dual 12/24/48 VDC power inputs IP30 aluminum housing Rugged hardware design well suited for hazardous locations (Class 1 Div. 2/ATEX Zone 2), transportation (NEMA TS2/EN 50121-4/e-Mark), and maritime environments (DNV/GL/LR/ABS/NK) -40 to 75°C operating temperature range (-T models) ...
-
MOXA ioLogik E1210 Universal Controllers Ethern...
Features and Benefits User-definable Modbus TCP Slave addressing Supports RESTful API for IIoT applications Supports EtherNet/IP Adapter 2-port Ethernet switch for daisy-chain topologies Saves time and wiring costs with peer-to-peer communications Active communication with MX-AOPC UA Server Supports SNMP v1/v2c Easy mass deployment and configuration with ioSearch utility Friendly configuration via web browser Simp...
-
MOXA TSN-G5008-2GTXSFP Full Gigabit Managed Ind...
Features and Benefits Compact and flexible housing design to fit into confined spaces Web-based GUI for easy device configuration and management Security features based on IEC 62443 IP40-rated metal housing Ethernet Interface Standards IEEE 802.3 for10BaseTIEEE 802.3u for 100BaseT(X) IEEE 802.3ab for 1000BaseT(X) IEEE 802.3z for 1000B...
-
MOXA MGate MB3480 Modbus TCP Gateway
Features and Benefits FeaSupports Auto Device Routing for easy configuration Supports route by TCP port or IP address for flexible deployment Converts between Modbus TCP and Modbus RTU/ASCII protocols 1 Ethernet port and 1, 2, or 4 RS-232/422/485 ports 16 simultaneous TCP masters with up to 32 simultaneous requests per master Easy hardware setup and configurationtures and Benefits ...
-
MOXA MGate 5118 Modbus TCP Gateway
Introduction The MGate 5118 industrial protocol gateways support the SAE J1939 protocol, which is based on CAN bus (Controller Area Network). SAE J1939 is used to implement communication and diagnostics among vehicle components, diesel engine generators, and compression engines, and is suitable for the heavy-duty truck industry and backup power systems. It is now common to use an engine control unit (ECU) to control these kinds of devic...