MOXA EDS-205 Entry-level Unmanaged Industrial Ethernet Switch
10/100BaseT(X) (RJ45 connector)
IEEE802.3/802.3u/802.3x support
Broadcast storm protection
DIN-rail mounting ability
-10 to 60°C operating temperature range
Ethernet Interface
| Standards | IEEE 802.3 for10BaseTIEEE 802.3u for 100BaseT(X)IEEE 802.3x for flow control |
| 10/100BaseT(X) Ports (RJ45 connector) | Full/Half duplex modeAuto MDI/MDI-X connectionAuto negotiation speed |
Switch Properties
| Processing Type | Store and Forward |
| MAC Table Size | 1 K |
| Packet Buffer Size | 512 kbits |
Power Parameters
| Input Voltage | 24 VDC |
| Input Current | 0.11 A @ 24 VDC |
| Operating Voltage | 12 to 48 VDC |
| Connection | 1 removable 3-contact terminal block(s) |
| Overload Current Protection | 1.1 A @ 24 VDC |
| Reverse Polarity Protection | Supported |
Physical Characteristics
| Housing | Plastic |
| IP Rating | IP30 |
| Dimensions | 24.9 x100x 86.5 mm (0.98 x 3.94 x 3.41 in) |
| Weight | 135g(0.30 lb) |
| Installation | DIN-rail mounting |
Environmental Limits
| Operating Temperature | -10to 60°C (14to140°F) |
| Storage Temperature (package included) | -40 to 85°C (-40 to185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
Standards and Certifications
| Safety | EN 60950-1, UL508 |
| EMC | EN 55032/24 |
| EMI | CISPR 32, FCC Part 15B Class A |
| EMS | IEC 61000-4-2 ESD: Contact: 4 kV; Air:8 kVIEC 61000-4-3 RS:80 MHz to 1 GHz: 3 V/mIEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kVIEC 61000-4-5 Surge: Power: 1 kV; Signal: 1 kV IEC 61000-4-6 CS:3VIEC 61000-4-8 PFMF |
| Shock | IEC 60068-2-27 |
| Vibration | IEC 60068-2-6 |
| Freefall | IEC 60068-2-31 |
MOXA EDS-205 Available Models
| Model 1 | MOXA EDS-205A-S-SC |
| Model 2 | MOXA EDS-205A-M-ST |
| Model 3 | MOXA EDS-205A-S-SC-T |
| Model 4 | MOXA EDS-205A-M-SC-T |
| Model 5 | MOXA EDS-205A |
| Model 6 | MOXA EDS-205A-T |
| Model 7 | MOXA EDS-205A-M-ST-T |
| Model 8 | MOXA EDS-205A-M-SC |
Related products
-
MOXA TCF-142-M-SC-T Industrial Serial-to-Fiber ...
Features and Benefits Ring and point-to-point transmission Extends RS-232/422/485 transmission up to 40 km with single-mode (TCF- 142-S) or 5 km with multi-mode (TCF-142-M) Decreases signal interference Protects against electrical interference and chemical corrosion Supports baudrates up to 921.6 kbps Wide-temperature models available for -40 to 75°C environments ...
-
MOXA ioLogik E2210 Universal Controller Smart E...
Features and Benefits Front-end intelligence with Click&Go control logic, up to 24 rules Active communication with MX-AOPC UA Server Saves time and wiring costs with peer-to-peer communications Supports SNMP v1/v2c/v3 Friendly configuration via web browser Simplifies I/O management with MXIO library for Windows or Linux Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments ...
-
MOXA MDS-G4028-T Layer 2 Managed Managed Indust...
Features and Benefits Multiple interface type 4-port modules for greater versatility Tool-free design for effortlessly adding or replacing modules without shutting down the switch Ultra-compact size and multiple mounting options for flexible installation Passive backplane to minimize maintenance efforts Rugged die-cast design for use in harsh environments Intuitive, HTML5-based web interface for a seamless experie...
-
MOXA EDS-510E-3GTXSFP-T Layer 2 Managed Industr...
Features and Benefits 3 Gigabit Ethernet ports for redundant ring or uplink solutionsTurbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), STP/STP, and MSTP for network redundancyRADIUS, TACACS+, SNMPv3, IEEE 802.1x, HTTPS, SSH, and sticky MAC address to enhance network security Security features based on IEC 62443 EtherNet/IP, PROFINET, and Modbus TCP protocols supported for device management and...
-
MOXA NPort 5650I-8-DT Device Server
Introduction MOXA NPort 5600-8-DTL device servers can conveniently and transparently connect 8 serial devices to an Ethernet network, allowing you to network your existing serial devices with basic configurations. You can both centralize management of your serial devices and distribute management hosts over the network. The NPort® 5600-8-DTL device servers have a smaller form factor than our 19-inch models, making them a great choice fo...
-
MOXA MGate 5217I-600-T Modbus TCP Gateway
Introduction The MGate 5217 Series comprise 2-port BACnet gateways that can convert Modbus RTU/ACSII/TCP Server (Slave) devices to BACnet/IP Client system or BACnet/IP Server devices to Modbus RTU/ACSII/TCP Client (Master) system. Depending on the size and scale of the network, you can use the 600-point or 1200-point gateway model. All models are rugged, DIN-rail mountable, operate in wide temperatures, and offer built-in 2-kV isolation...