MOXA EDR-G9010 Series industrial secure router
The EDR-G9010 Series is a set of highly integrated industrial multi-port secure routers with firewall/NAT/VPN and managed Layer 2 switch functions. These devices are designed for Ethernet-based security applications in critical remote control or monitoring networks. These secure routers provide an electronic security perimeter to protect critical cyber assets including substations in power applications, pump-and-treat systems in water stations, distributed control systems in oil and gas applications, and PLC/SCADA systems in factory automation. Furthermore, with the addition of IDS/IPS, the EDR-G9010 Series is an industrial next-generation firewall, equipped with threat detection and prevention capabilities to further protect critical
Certified by IACS UR E27 Rev.1 and IEC 61162-460 Edition 3.0 marine cybersecurity standard
Developed according to the IEC 62443-4-1 and compliant with the IEC 62443-4-2 industrial cybersecurity standards
10-port Gigabit all-in-one firewall/NAT/VPN/router/switch
Industrial-grade Intrusion Prevention/Detection System (IPS/IDS)
Visualize OT security with the MXsecurity management software
Secure remote access tunnel with VPN
Examine industrial protocol data with Deep Packet Inspection (DPI) technology
Easy network setup with Network Address Translation (NAT)
RSTP/Turbo Ring redundant protocol enhances network redundancy
Supports Secure Boot for checking system integrity
-40 to 75°C operating temperature range (-T model)
Related products
-
MOXA NPort 5610-8-DT 8-port RS-232/422/485 seri...
Features and Benefits 8 serial ports supporting RS-232/422/485 Compact desktop design 10/100M auto-sensing Ethernet Easy IP address configuration with LCD panel Configure by Telnet, web browser, or Windows utility Socket modes: TCP server, TCP client, UDP, Real COM SNMP MIB-II for network management Introduction Convenient Design for RS-485 ...
-
MOXA ioLogik E1211 Universal Controllers Ethern...
Features and Benefits User-definable Modbus TCP Slave addressing Supports RESTful API for IIoT applications Supports EtherNet/IP Adapter 2-port Ethernet switch for daisy-chain topologies Saves time and wiring costs with peer-to-peer communications Active communication with MX-AOPC UA Server Supports SNMP v1/v2c Easy mass deployment and configuration with ioSearch utility Friendly configuration via web browser Simp...
-
MOXA MGate MB3480 Modbus TCP Gateway
Features and Benefits FeaSupports Auto Device Routing for easy configuration Supports route by TCP port or IP address for flexible deployment Converts between Modbus TCP and Modbus RTU/ASCII protocols 1 Ethernet port and 1, 2, or 4 RS-232/422/485 ports 16 simultaneous TCP masters with up to 32 simultaneous requests per master Easy hardware setup and configurationtures and Benefits ...
-
MOXA EDR-G903 industrial secure router
Introduction The EDR-G903 is a high-performance, industrial VPN server with a firewall/NAT all-in-one secure router. It is designed for Ethernet-based security applications on critical remote control or monitoring networks, and it provides an Electronic Security Perimeter for the protection of critical cyber assets such as pumping stations, DCS, PLC systems on oil rigs, and water treatment systems. The EDR-G903 Series includes the follo...
-
MOXA NPort 6610-8 Secure Terminal Server
Features and Benefits LCD panel for easy IP address configuration (standard temp. models) Secure operation modes for Real COM, TCP Server, TCP Client, Pair Connection, Terminal, and Reverse Terminal Nonstandard baudrates supported with high precision Port buffers for storing serial data when the Ethernet is offline Supports IPv6 Ethernet redundancy (STP/RSTP/Turbo Ring) with network module Generic serial com...
-
MOXA EDS-408A-3S-SC Industrial Ethernet Switch
Features and Benefits Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and RSTP/STP for network redundancy IGMP Snooping, QoS, IEEE 802.1Q VLAN, and port-based VLAN supported Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01 PROFINET or EtherNet/IP enabled by default (PN or EIP models) Supports MXstudio for easy, visualized industrial network mana...