Features and Benefits
User-definable Modbus TCP Slave addressing
Supports RESTful API for IIoT applications
Supports EtherNet/IP Adapter
2-port Ethernet switch for daisy-chain topologies
Saves time and wiring costs with peer-to-peer communications
Active communication with MX-AOPC UA Server
Supports SNMP v1/v2c
Easy mass deployment and configuration with ioSearch utility
Friendly configuration via web browser
Simp...
Features and Benefits
User-friendly LCD panel for easy installation
Adjustable termination and pull high/low resistors
Socket modes: TCP server, TCP client, UDP
Configure by Telnet, web browser, or Windows utility
SNMP MIB-II for network management
2 kV isolation protection for NPort 5430I/5450I/5450I-T
-40 to 75°C operating temperature range (-T model)
Speci...
Features and Benefits
Fast 3-step web-based configuration
Surge protection for serial, Ethernet, and power
COM port grouping and UDP multicast applications
Screw-type power connectors for secure installation
Dual DC power inputs with power jack and terminal block
Versatile TCP and UDP operation modes
Specifications
Ethernet Interface
10/100Bas...
Introduction
The EDS-316 Ethernet switches provide an economical solution for your industrial Ethernet connections. These 16-port switches come with a built-in relay warning function that alerts network engineers when power failures or port breaks occur. In addition, the switches are designed for harsh industrial environments, such as the hazardous locations defined by the Class 1 Div. 2 and ATEX Zone 2 standards....
Features and Benefits
FeaSupports Auto Device Routing for easy configuration
Supports route by TCP port or IP address for flexible deployment
Converts between Modbus TCP and Modbus RTU/ASCII protocols
1 Ethernet port and 1, 2, or 4 RS-232/422/485 ports
16 simultaneous TCP masters with up to 32 simultaneous requests per master
Easy hardware setup and configurationtures and Benefits
...
Introduction
The EDS-P206A-4PoE switches are smart, 6-port, unmanaged Ethernet switches supporting PoE (Power-over-Ethernet) on ports 1 to 4. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-P206A-4PoE switches enable centralization of the power supply and provide up to 30 watts of power per port.
The switches can be used to power IEEE 802.3af/at-compliant powered devices (PD), el...