| General information | 
| Product type designation | AQ 8xU/I HS | 
| HW functional status | From FS01 | 
| Firmware version | V2.1.0 | 
| • FW update possible | Yes | 
| Product function | 
| • I&M data | Yes; I&M0 to I&M3 | 
| • Isochronous mode | Yes | 
| • Prioritized startup | No | 
| • Output range scalable | No | 
| Engineering with | 
| • STEP 7 TIA Portal configurable/integrated from version | V14 / - | 
| • STEP 7 configurable/integrated from version | V5.5 SP3 / - | 
| • PROFIBUS from GSD version/GSD revision | V1.0 / V5.1 | 
| • PROFINET from GSD version/GSD revision | V2.3 / - | 
| Operating mode | 
| • Oversampling | Yes | 
| • MSO | Yes | 
| CiR - Configuration in RUN | 
| Reparameterization possible in RUN | Yes | 
| Calibration possible in RUN | Yes | 
| Supply voltage | 
| Rated value (DC) | 24 V | 
| permissible range, lower limit (DC) | 19.2 V | 
| permissible range, upper limit (DC) | 28.8 V | 
| Reverse polarity protection | Yes | 
| Input current | 
| Current consumption, max. | 320 mA; with 19.2 V supply | 
| Power | 
| Power available from the backplane bus | 1.15 W | 
| Power loss | 
| Power loss, typ. | 7 W | 
| Analog outputs | 
| Number of analog outputs | 8 | 
| Voltage output, short-circuit protection | Yes | 
| Voltage output, short-circuit current, max. | 45 mA | 
| Current output, no-load voltage, max. | 20 V | 
| Cycle time (all channels), min. | 125 卩s; independent of number of activated channels |