English
  • head_banner_01

MOXA TCC 100 Serial-to-Serial Converters

  • MOXA TCC 100 Serial-to-Serial Converters
  • MOXA TCC 100 Serial-to-Serial Converters
  • MOXA TCC 100 Serial-to-Serial Converters
  • MOXA TCC 100 Serial-to-Serial Converters
  • MOXA TCC 100 Serial-to-Serial Converters

Short Description:

MOXA TCC 100 is TCC-100/100I Series，
RS-232 to RS-422/485 converter


Product Detail

Product Tags

Introduction

The TCC-100/100I Series of RS-232 to RS-422/485 converters increases networking capability by extending the RS-232 transmission distance. Both converters have a superior industrial-grade design that includes DIN-rail mounting, terminal block wiring, an external terminal block for power, and optical isolation (TCC-100I and TCC-100I-T only). The TCC-100/100I Series converters are ideal solutions for converting RS-232 signals to RS-422/485 in critical industrial environments.

Features and Benefits

 RS-232 to RS-422 conversion with RTS/CTS support

 RS-232 to 2-wire or 4-wire RS-485 conversion

 2 kV isolation protection (TCC-100I)

 Wall mounting and DIN-rail mounting

 Plug-in terminal block for easy RS-422/485 wiring

 LED indicators for power, Tx, Rx

 Wide-temperature model available for -40 to 85°C environments

Features and Benefits

 

Physical Characteristics

Housing Metal
IP Rating IP30
Dimensions 67 x 100.4 x 22 mm (2.64 x 3.93 x 0.87 in)
Weight 148 g (0.33 lb)
Installation Wall mountingDIN-rail mounting (with optional kit)

 

Environmental Limits

Operating Temperature Standard models: -20 to 60°C (-4 to 140°F)Wide temp. models: -40 to 85°C (-40 to 185°F)
Storage Temperature (package included) -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)

 

 

 

Serial Interface

No. of Ports 2
Connector Terminal block
Serial Standards RS-232 RS-422 RS-485
Baudrate 50 bps to 921.6 kbps (supports non-standard baudrates)
Pull High/Low Resistor for RS-485 1 kilo-ohm, 150 kilo-ohms
RS-485 Data Direction Control ADDC (automatic data direction control)
Terminator for RS-485 N/A, 120 ohms, 120 kilo-ohms
Isolation TCC-100I/100I-T: 2 kV (-I model)

 

 

Package Contents

Device 1 x TCC-100/100I Series converter
Installation Kit 1 x DIN-rail kit1 x rubber stand
Cable 1 x terminal block to power jack converter
Documentation 1 x quick installation guide1 x warranty card

 

 

MOXA TCC 100 Related model

Model Name Isolation Operating Temp.
TCC-100 – -20 to 60°C
TCC-100-T – -40 to 85°C
TCC-100I √ -20 to 60°C
TCC-100I-T √ -40 to 85°C
  • Previous:
  • Next:
    • Write your message here and send it to us

    Related products

    • MOXA EDS-510E-3GTXSFP Layer 2 Managed Industrial Ethernet Switch

      MOXA EDS-510E-3GTXSFP Layer 2 Managed Industria...

      Features and Benefits 3 Gigabit Ethernet ports for redundant ring or uplink solutionsTurbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), RSTP/STP, and MSTP for network redundancyRADIUS, TACACS+, SNMPv3, IEEE 802.1x, HTTPS, SSH, and sticky MAC address to enhance network security Security features based on IEC 62443 EtherNet/IP, PROFINET, and Modbus TCP protocols supported for device management and...

      See more products >
    • MOXA EDS-G512E-4GSFP Layer 2 Managed Switch

      MOXA EDS-G512E-4GSFP Layer 2 Managed Switch

      Introduction The EDS-G512E Series is equipped with 12 Gigabit Ethernet ports and up to 4 fiber-optic ports, making it ideal for upgrading an existing network to Gigabit speed or building a new full Gigabit backbone. It also comes with 8 10/100/1000BaseT(X), 802.3af (PoE), and 802.3at (PoE+)-compliant Ethernet port options to connect high-bandwidth PoE devices. Gigabit transmission increases bandwidth for higher pe...

      See more products >
    • MOXA EDS-G516E-4GSFP Gigabit Managed Industrial Ethernet Switch

      MOXA EDS-G516E-4GSFP Gigabit Managed Industrial...

      Features and Benefits Up to 12 10/100/1000BaseT(X) ports and 4 100/1000BaseSFP portsTurbo Ring and Turbo Chain (recovery time < 50 ms @ 250 switches), and STP/RSTP/MSTP for network redundancy RADIUS, TACACS+, MAB Authentication, SNMPv3, IEEE 802.1X, MAC ACL, HTTPS, SSH, and sticky MAC-addresses to enhance network security Security features based on IEC 62443 EtherNet/IP, PROFINET, and Modbus TCP protocols suppo...

      See more products >
    • MOXA A52-DB9F w/o Adapter converter with DB9F cable

      MOXA A52-DB9F w/o Adapter converter with DB9F c...

      Introduction   The A52 and A53 are general RS-232 to RS-422/485 converters designed for users who need to extend RS-232 transmission distance and increase networking capability. Features and Benefits Automatic Data Direction Control (ADDC) RS-485 data control Automatic baudrate detection RS-422 hardware flow control: CTS, RTS signals LED indicators for power and signal...

      See more products >
    • MOXA NPort 6450 Secure Terminal Server

      MOXA NPort 6450 Secure Terminal Server

      Features and Benefits LCD panel for easy IP address configuration (standard temp. models)  Secure operation modes for Real COM, TCP Server, TCP Client, Pair Connection, Terminal, and Reverse Terminal  Nonstandard baudrates supported with high precision  Port buffers for storing serial data when the Ethernet is offline  Supports IPv6  Ethernet redundancy (STP/RSTP/Turbo Ring) with network module  Generic serial com...

      See more products >
    • MOXA IM-6700A-8SFP Fast Industrial Ethernet Module

      MOXA IM-6700A-8SFP Fast Industrial Ethernet Module

      Features and Benefits Modular design lets you choose from a variety of media combinations Ethernet Interface 100BaseFX Ports (multi-mode SC connector) IM-6700A-2MSC4TX: 2IM-6700A-4MSC2TX: 4 IM-6700A-6MSC: 6 100BaseFX Ports (multi-mode ST connector)    IM-6700A-2MST4TX: 2 IM-6700A-4MST2TX: 4 IM-6700A-6MST: 6   100BaseF...

      See more products >
    Hit enter to search or ESC to close