English
  • head_banner_01

MOXA NPort 5610-8-DT 8-port RS-232/422/485 serial device server

  • MOXA NPort 5610-8-DT 8-port RS-232/422/485 serial device server
  • MOXA NPort 5610-8-DT 8-port RS-232/422/485 serial device server
  • MOXA NPort 5610-8-DT 8-port RS-232/422/485 serial device server
  • MOXA NPort 5610-8-DT 8-port RS-232/422/485 serial device server

Short Description:

Moxa NPort 5600-8-DT device servers can conveniently and transparently connect 8 serial devices to an Ethernet network, allowing you to network your existing serial devices with only basic configuration. You can both centralize management of your serial devices and distribute management hosts over the network. Since the NPort 5600-8-DT device servers have a smaller form factor compared to our 19-inch models, they are a great choice for applications that need additional serial ports, but for which mounting rails are not available.


Product Detail

Product Tags

Features and Benefits

8 serial ports supporting RS-232/422/485

 Compact desktop design

 10/100M auto-sensing Ethernet

 Easy IP address configuration with LCD panel

 Configure by Telnet, web browser, or Windows utility

 Socket modes: TCP server, TCP client, UDP, Real COM

 SNMP MIB-II for network management

Introduction

 

Convenient Design for RS-485 Applications

The NPort 5650-8-DT device servers support selectable 1 kilo-ohm and 150 kilo-ohms pull high/low resistors and a 120-ohm terminator. In some critical environments, termination resistors may be needed to prevent the reflection of serial signals. When using termination resistors, it is also important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible with all environments, NPort 5600-8-DT device servers use DIP switches to allow users to adjust termination and pull high/low resistor values manually for each serial port.

Convenient Power Inputs

The NPort 5650-8-DT device servers support both power terminal blocks and power jacks for ease of use and greater flexibility. Users can connect the terminal block directly to a DC power source, or use the power jack to connect to an AC circuit through an adapter.

LED Indicators to Ease Your Maintenance Tasks

The System LED, Serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and help engineers analyze problems in the field. The NPort 5600’s LEDs not only indicate current system and network status, but also help field engineers monitor the status of attached serial devices.

Two Ethernet Ports for Convenient Cascade Wiring

The NPort 5600-8-DT device servers come with two Ethernet ports that can be used as Ethernet switch ports. Connect one port to the network or server, and the other port to another Ethernet device. The dual Ethernet ports eliminate the need to connect each device to a separate Ethernet switch, reducing wiring costs.

 

 

 

MOXA NPort 5610-8-DT  Available Models

Model Name

Ethernet Interface Connector

Serial Interface

No. of Serial Ports

Operating Temp.

Input Voltage
NPort5610-8

8-pin RJ45

RS-232

8

0 to 60°C

100-240 VAC
NPort5610-8-48V

8-pin RJ45

RS-232

8

0 to 60°C

±48VDC
NPort 5630-8

8-pin RJ45

RS-422/485

8

0 to 60°C

100-240VAC
NPort5610-16

8-pin RJ45

RS-232

16

0 to 60°C

100-240VAC
NPort5610-16-48V

8-pin RJ45

RS-232

16

0 to 60°C

±48VDC
NPort5630-16

8-pin RJ45

RS-422/485

16

0 to 60°C

100-240 VAC
NPort5650-8

8-pin RJ45

 RS-232/422/485

8

0 to 60°C

100-240 VAC
NPort 5650-8-M-SC

Multi-mode fiber SC

 RS-232/422/485

8

0 to 60°C

100-240 VAC
NPort 5650-8-S-SC

Single-mode fiber SC

 RS-232/422/485

8

0 to 60°C

100-240VAC
NPort5650-8-T

8-pin RJ45

 RS-232/422/485

8

-40 to 75°C

100-240VAC
NPort5650-8-HV-T

8-pin RJ45

 RS-232/422/485

8

-40 to 85°C

88-300 VDC
NPort5650-16

8-pin RJ45

 RS-232/422/485

16

0 to 60°C

100-240VAC
NPort 5650-16-M-SC

Multi-mode fiber SC

 RS-232/422/485

16

0 to 60°C

100-240 VAC
NPort 5650-16-S-SC

Single-mode fiber SC

 RS-232/422/485

16

0 to 60°C

100-240 VAC
NPort5650-16-T

8-pin RJ45

 RS-232/422/485

16

-40 to 75°C

100-240 VAC
NPort5650-16-HV-T

8-pin RJ45

 RS-232/422/485

16

-40 to 85°C

88-300 VDC
  • Previous:
  • Next:
    • Write your message here and send it to us

    Related products

    • MOXA EDS-2018-ML-2GTXSFP Gigabit Unmanaged Ethernet Switch

      MOXA EDS-2018-ML-2GTXSFP Gigabit Unmanaged Ethe...

      Features and Benefits 2 Gigabit uplinks with flexible interface design for high-bandwidth data aggregationQoS supported to process critical data in heavy traffic Relay output warning for power failure and port break alarm IP30-rated metal housing Redundant dual 12/24/48 VDC power inputs -40 to 75°C operating temperature range (-T models) Specifications ...

      See more products >
    • MOXA EDS-510A-3SFP Layer 2 Managed Industrial Ethernet Switch

      MOXA EDS-510A-3SFP Layer 2 Managed Industrial E...

      Features and Benefits 2 Gigabit Ethernet ports for redundant ring and 1 Gigabit Ethernet port for uplink solutionTurbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches),  RSTP/STP, and MSTP for network redundancy TACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network security Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01 ...

      See more products >
    • MOXA MGate 4101I-MB-PBS Fieldbus Gateway

      MOXA MGate 4101I-MB-PBS Fieldbus Gateway

      Introduction   The MGate 4101-MB-PBS gateway provides a communication portal between PROFIBUS PLCs (e.g., Siemens S7-400 and S7-300 PLCs) and Modbus devices. With the QuickLink feature, I/O mapping can be accomplished within a matter of minutes. All models are protected with a rugged metallic casing, are DIN-rail mountable, and offer optional built-in optical isolation. Features and Benefits ...

      See more products >
    • MOXA MGate 5217I-600-T Modbus TCP Gateway

      MOXA MGate 5217I-600-T Modbus TCP Gateway

      Introduction   The MGate 5217 Series comprise 2-port BACnet gateways that can convert Modbus RTU/ACSII/TCP Server (Slave) devices to BACnet/IP Client system or BACnet/IP Server devices to Modbus RTU/ACSII/TCP Client (Master) system. Depending on the size and scale of the network, you can use the 600-point or 1200-point gateway model. All models are rugged, DIN-rail mountable, operate in wide temperatures, and offer built-in 2-kV isolation...

      See more products >
    • MOXA ICS-G7526A-2XG-HV-HV-T Gigabit Managed Ethernet Switches

      MOXA ICS-G7526A-2XG-HV-HV-T Gigabit Managed Eth...

      Introduction Process automation and transportation automation applications combine data, voice, and video, and consequently require high performance and high reliability. The ICS-G7526A Series full Gigabit backbone switches are equipped with 24 Gigabit Ethernet ports plus up to 2 10G Ethernet ports, making them ideal for large-scale industrial networks. The ICS-G7526A’s full Gigabit capability increases bandwidth ...

      See more products >
    • MOXA NPort 5130 Industrial General Device Server

      MOXA NPort 5130 Industrial General Device Server

      Features and Benefits Small size for easy installation  Real COM and TTY drivers for Windows, Linux, and macOS  Standard TCP/IP interface and versatile operation modes  Easy-to-use Windows utility for configuring multiple device servers  SNMP MIB-II for network management  Configure by Telnet, web browser, or Windows utility  Adjustable pull high/low resistor for RS-485 ports ...

      See more products >
    Hit enter to search or ESC to close