Moxa MXconfig Industrial Network Configuration tool
Mass managed function configuration increases deployment efficiency and reduces setup time
Mass configuration duplication reduces installation costs
Link sequence detection eliminates manual setting errors
Configuration overview and documentation for easy status review and management
Three user privilege levels enhance security and management flexibility
Easy broadcast search of the network for all supported Moxa managed Ethernet devices
Mass network setting (such as IP addresses, gateway, and DNS) deployment reduces setup time
Deployment of mass managed functions increases configuration efficiency
Security wizard for convenient setup of security-related parameters
Multiple grouping for easy classification
User-friendly port selection panel provides physical port descriptions
VLAN Quick-Add Panel speeds up setup time
Deploy multiple devices with one click using CLI execution
Quick configuration: copies a specific setting to multiple devices and changes IP addresses with one click
Link sequence detection eliminates manual configuration errors and avoids disconnections, especially when configuring redundancy protocols, VLAN settings, or firmware upgrades for a network in a daisy-chain topology (line topology).
Link Sequence IP setting (LSIP) prioritizes devices and configures IP addresses by link sequence to enhance deployment efficiency, especially in a daisy-chain topology (line topology).
Related products
-
MOXA EDS-405A Entry-level Managed Industrial Et...
Features and Benefits Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and RSTP/STP for network redundancy IGMP Snooping, QoS, IEEE 802.1Q VLAN, and port-based VLAN supported Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01 PROFINET or EtherNet/IP enabled by default (PN or EIP models) Supports MXstudio for easy, visualized industrial net...
-
MOXA MGate MB3170I-T Modbus TCP Gateway
Features and Benefits Supports Auto Device Routing for easy configuration Supports route by TCP port or IP address for flexible deployment Connects up to 32 Modbus TCP servers Connects up to 31 or 62 Modbus RTU/ASCII slaves Accessed by up to 32 Modbus TCP clients (retains 32 Modbus requests for each Master) Supports Modbus serial master to Modbus serial slave communications Built-in Ethernet cascading for easy wir...
-
MOXA TCF-142-S-ST Industrial Serial-to-Fiber Co...
Features and Benefits Ring and point-to-point transmission Extends RS-232/422/485 transmission up to 40 km with single-mode (TCF- 142-S) or 5 km with multi-mode (TCF-142-M) Decreases signal interference Protects against electrical interference and chemical corrosion Supports baudrates up to 921.6 kbps Wide-temperature models available for -40 to 75°C environments ...
-
MOXA EDS-308-S-SC Unmanaged Industrial Ethernet...
Features and Benefits Relay output warning for power failure and port break alarm Broadcast storm protection -40 to 75°C operating temperature range (-T models) Specifications Ethernet Interface 10/100BaseT(X) Ports (RJ45 connector) EDS-308/308-T: 8EDS-308-M-SC/308-M-SC-T/308-S-SC/308-S-SC-T/308-S-SC-80:7EDS-308-MM-SC/308...
-
MOXA IMC-21A-S-SC-T Industrial Media Converter
Features and Benefits Multi-mode or single-mode, with SC or ST fiber connector Link Fault Pass-Through (LFPT) -40 to 75°C operating temperature range (-T models) DIP switches to select FDX/HDX/10/100/Auto/Force Specifications Ethernet Interface 10/100BaseT(X) Ports (RJ45 connector) 1 100BaseFX Ports (multi-mode SC conne...
-
MOXA NPort 5450I Industrial General Serial Devi...
Features and Benefits User-friendly LCD panel for easy installation Adjustable termination and pull high/low resistors Socket modes: TCP server, TCP client, UDP Configure by Telnet, web browser, or Windows utility SNMP MIB-II for network management 2 kV isolation protection for NPort 5430I/5450I/5450I-T -40 to 75°C operating temperature range (-T model) Speci...