• head_banner_01

MOXA MGate 5118 Modbus TCP Gateway

Short Description:

MOXA MGate 5118 is MGate 5118 Series
1-port J1939 to Modbus/PROFINET/EtherNet/IP gateway, 0 to 60°C operating temperature


Product Detail

Product Tags

Introduction

 

The MGate 5118 industrial protocol gateways support the SAE J1939 protocol, which is based on CAN bus (Controller Area Network). SAE J1939 is used to implement communication and diagnostics among vehicle components, diesel engine generators, and compression engines, and is suitable for the heavy-duty truck industry and backup power systems. It is now common to use an engine control unit (ECU) to control these kinds of devices, and more and more applications are using PLCs for process automation to monitor the status of J1939 devices connected behind the ECU.

The MGate 5118 gateways support the conversion of J1939 data to Modbus RTU/ASCII/TCP, EtherNet/IP, or PROFINET protocols to support most PLC applications. Devices that support the J1939 protocol can be monitored and controlled by PLCs and SCADA systems that use the Modbus RTU/ASCII/TCP, EtherNet/IP, and PROFINET protocols. With the MGate 5118, you can use the same gateway in a variety of PLC environments.

Features and Benefits

Converts J1939 to Modbus, PROFINET, or EtherNet/IP

Supports Modbus RTU/ASCII/TCP master/client and slave/server

Supports EtherNet/IP Adapter

Supports PROFINET IO device

Supports J1939 protocol

Effortless configuration via web-based wizard

Built-in Ethernet cascading for easy wiring

Embedded traffic monitoring/diagnostic information for easy troubleshooting

microSD card for configuration backup/duplication and event logs

Status monitoring and fault protection for easy maintenance

CAN bus and serial port with 2 kV isolation protection

-40 to 75°C wide operating temperature models available

Security features based on IEC 62443

Datesheet

 

Physical Characteristics

Housing Metal
IP Rating IP30
Dimensions 45.8 x 105 x 134 mm (1.8 x 4.13 x 5.28 in)
Weight 589 g (1.30 lb)

 

Environmental Limits

Operating Temperature MGate 5118: 0 to 60°C (32 to 140°F)

MGate 5118-T: -40 to 75°C (-40 to 167°F)

Storage Temperature (package included) -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)

 

MOXA MGate 5118 related models

Model Name Operating Temp.
MGate 5118 0 to 60°C
MGate 5118-T -40 to 75°C

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • MOXA EDS-510A-3SFP-T Layer 2 Managed Industrial Ethernet Switch

      MOXA EDS-510A-3SFP-T Layer 2 Managed Industrial...

      Features and Benefits 2 Gigabit Ethernet ports for redundant ring and 1 Gigabit Ethernet port for uplink solutionTurbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), RSTP/STP, and MSTP for network redundancy TACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network security Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01 ...

    • MOXA NPort 5410 Industrial General Serial Device Server

      MOXA NPort 5410 Industrial General Serial Devic...

      Features and Benefits User-friendly LCD panel for easy installation Adjustable termination and pull high/low resistors Socket modes: TCP server, TCP client, UDP Configure by Telnet, web browser, or Windows utility SNMP MIB-II for network management 2 kV isolation protection for NPort 5430I/5450I/5450I-T -40 to 75°C operating temperature range (-T model) Speci...

    • MOXA EDS-G512E-8PoE-4GSFP Full Gigabit Managed Industrial Ethernet Switch

      MOXA EDS-G512E-8PoE-4GSFP Full Gigabit Managed ...

      Features and Benefits 8 IEEE 802.3af and IEEE 802.3at PoE+ standard ports36-watt output per PoE+ port in high-power mode Turbo Ring and Turbo Chain (recovery time < 50 ms @ 250 switches), RSTP/STP, and MSTP for network redundancy RADIUS, TACACS+, MAB Authentication, SNMPv3, IEEE 802.1X, MAC ACL, HTTPS, SSH, and sticky MAC-addresses to enhance network security Security features based on IEC 62443 EtherNet/IP, PR...

    • MOXA EDS-G512E-8PoE-4GSFP-T Layer 2 Managed Switch

      MOXA EDS-G512E-8PoE-4GSFP-T Layer 2 Managed Switch

      Introduction The EDS-G512E Series is equipped with 12 Gigabit Ethernet ports and up to 4 fiber-optic ports, making it ideal for upgrading an existing network to Gigabit speed or building a new full Gigabit backbone. It also comes with 8 10/100/1000BaseT(X), 802.3af (PoE), and 802.3at (PoE+)-compliant Ethernet port options to connect high-bandwidth PoE devices. Gigabit transmission increases bandwidth for higher pe...

    • MOXA ioLogik E1242 Universal Controllers Ethernet Remote I/O

      MOXA ioLogik E1242 Universal Controllers Ethern...

      Features and Benefits User-definable Modbus TCP Slave addressing Supports RESTful API for IIoT applications Supports EtherNet/IP Adapter 2-port Ethernet switch for daisy-chain topologies Saves time and wiring costs with peer-to-peer communications Active communication with MX-AOPC UA Server Supports SNMP v1/v2c Easy mass deployment and configuration with ioSearch utility Friendly configuration via web browser Simp...

    • MOXA ICS-G7850A-2XG-HV-HV 48G+2 10GbE Layer 3 Full Gigabit Modular Managed Industrial Ethernet Switch

      MOXA ICS-G7850A-2XG-HV-HV 48G+2 10GbE Layer 3 F...

      Features and Benefits Up to 48 Gigabit Ethernet ports plus 2 10G Ethernet ports Up to 50 optical fiber connections (SFP slots) Up to 48 PoE+ ports with external power supply (with IM-G7000A-4PoE module) Fanless, -10 to 60°C operating temperature range Modular design for maximum flexibility and hassle-free future expansion Hot-swappable interface and power modules for continuous operation Turbo Ring and Turbo Chain...