• head_banner_01

MOXA ioLogik E2214 Universal Controller Smart Ethernet Remote I/O

Short Description:

Moxa’s ioLogik E2200 Series Ethernet Remote I/O is a PC-based data acquisition and control device that uses proactive, event-based reporting to control I/O devices and features the Click&Go programming interface. Unlike traditional PLCs, which are passive and must poll for data, Moxa’s ioLogik E2200 Series will, when paired with our MX-AOPC UA Server, communicate with SCADA systems using active messaging that is pushed to the server only when state changes or configured events occur. Additionally, the ioLogik E2200 features SNMP for communications and control using an NMS (Network Management System), allowing IT professionals to configure the device to push I/O status reports according to configured specifications. This report-by-exception approach, which is new to PC-based monitoring, requires far less bandwidth than traditional polling methods.


Product Detail

Product Tags

Features and Benefits

Front-end intelligence with Click&Go control logic, up to 24 rules
Active communication with MX-AOPC UA Server
Saves time and wiring costs with peer-to-peer communications
Supports SNMP v1/v2c/v3
Friendly configuration via web browser
Simplifies I/O management with MXIO library for Windows or Linux
Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments

Specifications

Control Logic

Language Click&Go

Input/Output Interface

Digital Input Channels ioLogikE2210Series: 12 ioLogikE2212Series:8 ioLogikE2214Series:6
Digital Output Channels ioLogik E2210/E2212 Series: 8ioLogik E2260/E2262 Series: 4
Configurable DIO Channels (by software) ioLogik E2212 Series: 4ioLogik E2242 Series: 12
Relay Channels ioLogikE2214Series:6
Analog Input Channels ioLogik E2240 Series: 8ioLogik E2242 Series: 4
Analog Output Channels ioLogik E2240 Series: 2
RTD Channels ioLogik E2260 Series: 6
Thermocouple Channels ioLogik E2262 Series: 8
Buttons Reset button
Rotary Switch 0to9
Isolation 3kVDC or2kVrms

Digital Inputs

Connector Screw-fastened Euroblock terminal
Sensor Type ioLogik E2210 Series: Dry Contact and Wet Contact (NPN)ioLogik E2212/E2214/E2242 Series: Dry Contact and Wet Contact (NPN or PNP)
I/O Mode DI or event counter
Dry Contact On: short to GNDOff: open
Wet Contact (DI to GND) On: 0 to 3 VDC Off: 10 to 30 VDC
Counter Frequency 900 Hz
Digital Filtering Time Interval Software configurable
Points per COM ioLogik E2210 Series: 12 channels ioLogik E2212/E2242 Series: 6 channels ioLogik E2214 Series: 3 channels

Power Parameters

Power Connector Screw-fastened Euroblock terminal
No. of Power Inputs 1
Input Voltage 12to36 VDC
Power Consumption ioLogik E2210 Series: 202 mA @ 24 VDC ioLogik E2212 Series: 136 mA@ 24 VDC ioLogik E2214Series: 170 mA@ 24 VDC ioLogik E2240 Series: 198 mA@ 24 VDC ioLogik E2242 Series: 178 mA@ 24 VDC ioLogik E2260 Series: 95 mA @ 24 VDC ioLogik E2262 Series: 160 mA @ 24 VDC

Physical Characteristics

Dimensions 115x79x 45.6 mm (4.53 x3.11 x1.80 in)
Weight 250 g (0.55 lb)
Installation DIN-rail mounting, Wall mounting
Wiring I/O cable, 16to 26AWG Power cable, 16to26 AWG
Housing Plastic

Environmental Limits

Operating Temperature Standard Models: -10 to 60°C (14to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature (package included) -40 to 85°C (-40 to185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Altitude 2000 m

MOXA ioLogik E2214 Available Models

Model Name Input/Output Interface Digital Input Sensor Type Analog Input Range Operating Temp.
ioLogikE2210 12xDI,8xDO Wet Contact (NPN), Dry Contact - -10 to 60°C
ioLogikE2210-T 12xDI,8xDO Wet Contact (NPN), Dry Contact - -40 to 75°C
ioLogik E2212 8xDI,4xDIO,8xDO Wet Contact (NPN or PNP), Dry Contact - -10 to 60°C
ioLogikE2212-T 8 x DI, 4 x DIO, 8 x DO Wet Contact (NPN or PNP), Dry Contact - -40 to 75°C
ioLogikE2214 6x DI, 6x Relay Wet Contact (NPN or PNP), Dry Contact - -10 to 60°C
ioLogikE2214-T 6x DI, 6x Relay Wet Contact (NPN or PNP), Dry Contact - -40 to 75°C
ioLogik E2240 8xAI, 2xAO - ±150 mV, ±500 mV, ±5 V, ±10 V, 0-20 mA, 4-20 mA -10 to 60°C
ioLogik E2240-T 8xAI,2xAO - ±150 mV, ±500 mV, ±5 V, ±10 V, 0-20 mA, 4-20 mA -40 to 75°C
ioLogik E2242 12xDIO,4xAI Wet Contact (NPN or PNP), Dry Contact ±150 mV, 0-150 mV, ±500 mV, 0-500 mV, ±5 V, 0-5 V, ±10 V, 0-10 V, 0-20 mA, 4-20 mA -10 to 60°C
ioLogik E2242-T 12xDIO,4xAI Wet Contact (NPN or PNP), Dry Contact ±150 mV, 0-150 mV, ±500 mV, 0-500 mV, ±5 V, 0-5 V, ±10 V, 0-10 V, 0-20 mA, 4-20 mA -40 to 75°C
ioLogik E2260 4 x DO, 6 x RTD - - -10 to 60°C
ioLogik E2260-T 4 x DO, 6 x RTD - - -40 to 75°C
ioLogik E2262 4xDO,8xTC - - -10 to 60°C
ioLogik E2262-T 4xDO,8xTC - - -40 to 75°C

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • MOXA ioMirror E3210 Universal Controller I/O

      MOXA ioMirror E3210 Universal Controller I/O

      Introduction   The ioMirror E3200 Series, which is designed as a cable-replacement solution to connect remote digital input signals to output signals over an IP network, provides 8 digital input channels, 8 digital output channels, and a 10/100M Ethernet interface. Up to 8 pairs of digital input and output signals can be exchanged over Ethernet with another ioMirror E3200 Series device, or can be sent to a local PLC or DCS controller. Ove...

    • MOXA NPort 6450 Secure Terminal Server

      MOXA NPort 6450 Secure Terminal Server

      Features and Benefits LCD panel for easy IP address configuration (standard temp. models)  Secure operation modes for Real COM, TCP Server, TCP Client, Pair Connection, Terminal, and Reverse Terminal  Nonstandard baudrates supported with high precision  Port buffers for storing serial data when the Ethernet is offline  Supports IPv6  Ethernet redundancy (STP/RSTP/Turbo Ring) with network module  Generic serial com...

    • MOXA NPort 6610-8 Secure Terminal Server

      MOXA NPort 6610-8 Secure Terminal Server

      Features and Benefits LCD panel for easy IP address configuration (standard temp. models)  Secure operation modes for Real COM, TCP Server, TCP Client, Pair Connection, Terminal, and Reverse Terminal  Nonstandard baudrates supported with high precision  Port buffers for storing serial data when the Ethernet is offline  Supports IPv6  Ethernet redundancy (STP/RSTP/Turbo Ring) with network module  Generic serial com...

    • MOXA ioLogik E1260 Universal Controllers Ethernet Remote I/O

      MOXA ioLogik E1260 Universal Controllers Ethern...

      Features and Benefits User-definable Modbus TCP Slave addressing Supports RESTful API for IIoT applications Supports EtherNet/IP Adapter 2-port Ethernet switch for daisy-chain topologies Saves time and wiring costs with peer-to-peer communications Active communication with MX-AOPC UA Server Supports SNMP v1/v2c Easy mass deployment and configuration with ioSearch utility Friendly configuration via web browser Simp...

    • MOXA TCF-142-M-ST Industrial Serial-to-Fiber Converter

      MOXA TCF-142-M-ST Industrial Serial-to-Fiber Co...

      Features and Benefits Ring and point-to-point transmission Extends RS-232/422/485 transmission up to 40 km with single-mode (TCF- 142-S) or 5 km with multi-mode (TCF-142-M) Decreases signal interference Protects against electrical interference and chemical corrosion Supports baudrates up to 921.6 kbps Wide-temperature models available for -40 to 75°C environments ...

    • MOXA TSN-G5004 4G-port full Gigabit managed Ethernet switch

      MOXA TSN-G5004 4G-port full Gigabit managed Eth...

      Introduction The TSN-G5004 Series switches are ideal for making manufacturing networks compatible with the vision of Industry 4.0. The switches are equipped with 4 Gigabit Ethernet ports. The full Gigabit design makes them a good choice for upgrading an existing network to Gigabit speed or for building a new full-Gigabit backbone for future high-bandwidth applications. The compact design and user-friendly configur...