MOXA ioLogik E1213 Universal Controllers Ethernet Remote I/O
User-definable Modbus TCP Slave addressing
Supports RESTful API for IIoT applications
Supports EtherNet/IP Adapter
2-port Ethernet switch for daisy-chain topologies
Saves time and wiring costs with peer-to-peer communications
Active communication with MX-AOPC UA Server
Supports SNMP v1/v2c
Easy mass deployment and configuration with ioSearch utility
Friendly configuration via web browser
Simplifies I/O management with MXIO library for Windows or Linux
Class I Division 2, ATEX Zone 2 certification
Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments
Input/Output Interface
| Digital Input Channels | ioLogik E1210 Series: 16ioLogik E1212/E1213 Series: 8ioLogik E1214 Series: 6
ioLogik E1242 Series: 4 |
||
| Digital Output Channels | ioLogik E1211 Series: 16ioLogik E1213 Series: 4 | ||
| Configurable DIO Channels (by jumper) | ioLogik E1212 Series: 8ioLogik E1213/E1242 Series: 4 | ||
| Relay Channels | ioLogik E1214 Series: 6 | ||
| Analog Input Channels | ioLogik E1240 Series: 8ioLogik E1242 Series: 4 | ||
| Analog Output Channels | ioLogik E1241 Series: 4 | ||
| RTD Channels | ioLogik E1260 Series: 6 | ||
| Thermocouple Channels | ioLogik E1262 Series: 8 | ||
| Isolation | 3kVDC or2kVrms | ||
| Buttons | Reset button | ||
Digital Inputs
| Connector | Screw-fastened Euroblock terminal |
| Sensor Type | Dry contactWet contact (NPN or PNP) |
| I/O Mode | DI or event counter |
| Dry Contact | On: short to GNDOff: open |
| Wet Contact (DI to COM) | On:10to 30 VDC Off:0to3VDC |
| Counter Frequency | 250 Hz |
| Digital Filtering Time Interval | Software configurable |
| Points per COM | ioLogik E1210/E1212 Series: 8 channels ioLogik E1213 Series: 12 channels ioLogik E1214 Series: 6 channels ioLogik E1242 Series: 4 channels |
Digital Outputs
| Connector | Screw-fastened Euroblock terminal |
| I/O Type | ioLogik E1211/E1212/E1242 Series: SinkioLogik E1213 Series: Source |
| I/O Mode | DO or pulse output |
| Current Rating | ioLogik E1211/E1212/E1242 Series: 200 mA per channel ioLogik E1213 Series: 500 mA per channel |
| Pulse Output Frequency | 500 Hz (max.) |
| Over-Current Protection | ioLogik E1211/E1212/E1242 Series: 2.6 A per channel @ 25°C ioLogik E1213 Series: 1.5A per channel @ 25°C |
| Over-Temperature Shutdown | 175°C (typical), 150°C (min.) |
| Over-Voltage Protection | 35 VDC |
Relays
| Connector | Screw-fastened Euroblock terminal |
| Type | Form A (N.O.) power relay |
| I/O Mode | Relay or pulse output |
| Pulse Output Frequency | 0.3 Hz at rated load (max.) |
| Contact Current Rating | Resistive load: 5A@30 VDC, 250 VAC,110 VAC |
| Contact Resistance | 100 milli-ohms (max.) |
| Mechanical Endurance | 5,000,000 operations |
| Electrical Endurance | 100,000 operations @5A resistive load |
| Breakdown Voltage | 500 VAC |
| Initial Insulation Resistance | 1,000 mega-ohms (min.) @ 500 VDC |
| Note | Ambient humidity must be non-condensing and remain between 5 and 95%. The relays may malfunction when operating in high condensation environments below 0°C. |
Physical Characteristics
| Housing | Plastic |
| Dimensions | 27.8 x124x84 mm (1.09 x 4.88 x 3.31 in) |
| Weight | 200 g (0.44 lb) |
| Installation | DIN-rail mounting, Wall mounting |
| Wiring | I/O cable, 16to 26AWG Power cable, 12to24 AWG |
Environmental Limits
| Operating Temperature | Standard Models: -10 to 60°C (14to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Storage Temperature (package included) | -40 to 85°C (-40 to185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| Altitude | 4000 m4 |
MOXA ioLogik E1200 Series Available Models
| Model Name | Input/Output Interface | Digital Output Type | OperatingTemp. |
| ioLogikE1210 | 16xDI | - | -10 to 60°C |
| ioLogikE1210-T | 16xDI | - | -40 to 75°C |
| ioLogikE1211 | 16xDO | Sink | -10 to 60°C |
| ioLogikE1211-T | 16xDO | Sink | -40 to 75°C |
| ioLogikE1212 | 8xDI,8xDIO | Sink | -10 to 60°C |
| ioLogikE1212-T | 8 x DI, 8 x DIO | Sink | -40 to 75°C |
| ioLogikE1213 | 8 x DI, 4 x DO, 4 x DIO | Source | -10 to 60°C |
| ioLogikE1213-T | 8 x DI, 4 x DO, 4 x DIO | Source | -40 to 75°C |
| ioLogikE1214 | 6x DI, 6x Relay | - | -10 to 60°C |
| ioLogikE1214-T | 6x DI, 6x Relay | - | -40 to 75°C |
| ioLogikE1240 | 8xAI | - | -10 to 60°C |
| ioLogikE1240-T | 8xAI | - | -40 to 75°C |
| ioLogikE1241 | 4xAO | - | -10 to 60°C |
| ioLogikE1241-T | 4xAO | - | -40 to 75°C |
| ioLogikE1242 | 4DI,4xDIO,4xAI | Sink | -10 to 60°C |
| ioLogikE1242-T | 4DI,4xDIO,4xAI | Sink | -40 to 75°C |
| ioLogikE1260 | 6xRTD | - | -10 to 60°C |
Related products
-
MOXA MGate 5119-T Modbus TCP Gateway
Introduction The MGate 5119 is an industrial Ethernet gateway with 2 Ethernet ports and 1 RS-232/422/485 serial port. To integrate Modbus, IEC 60870-5-101, and IEC 60870-5-104 devices with an IEC 61850 MMS network, use the MGate 5119 as a Modbus master/client, IEC 60870-5-101/104 master, and DNP3 serial/TCP master to collect and exchange data with IEC 61850 MMS systems. Easy Configuration via SCL Generator The MGate 5119 as an IEC 61850...
-
MOXA AWK-1131A-EU Industrial Wireless AP
Introduction Moxa’s AWK-1131A extensive collection of industrial-grade wireless 3-in-1 AP/bridge/client products combine a rugged casing with high-performance Wi-Fi connectivity to deliver a secure and reliable wireless network connection that will not fail, even in environments with water, dust, and vibrations. The AWK-1131A industrial wireless AP/client meets the growing need for faster data transmission speeds ...
-
MOXA UPort 1250I USB To 2-port RS-232/422/485 S...
Features and Benefits Hi-Speed USB 2.0 for up to 480 Mbps USB data transmission rates 921.6 kbps maximum baudrate for fast data transmission Real COM and TTY drivers for Windows, Linux, and macOS Mini-DB9-female-to-terminal-block adapter for easy wiring LEDs for indicating USB and TxD/RxD activity 2 kV isolation protection (for “V' models) Specifications ...
-
MOXA NPort 6650-32 Terminal Server
Features and Benefits Moxa's terminal servers are equipped with the specialized functions and security features needed to establish reliable terminal connections to a network, and can connect various devices such as terminals, modems, data switches, mainframe computers, and POS devices to make them available to network hosts and process. LCD panel for easy IP address configuration (standard temp. models) Secure...
-
MOXA SFP-1FEMLC-T 1-port Fast Ethernet SFP Module
Introduction Moxa's small form-factor pluggable transceiver (SFP) Ethernet fiber modules for Fast Ethernet provide coverage across a wide range of communication distances. The SFP-1FE Series 1-port Fast Ethernet SFP modules are available as optional accessories for a wide range of Moxa Ethernet switches. SFP module with 1 100Base multi-mode, LC connector for 2/4 km transmission, -40 to 85°C operating temperature. ...
-
MOXA EDS-208-T Unmanaged Industrial Ethernet Sw...
Features and Benefits 10/100BaseT(X) (RJ45 connector), 100BaseFX (multi-mode, SC/ST connectors) IEEE802.3/802.3u/802.3x support Broadcast storm protection DIN-rail mounting ability -10 to 60°C operating temperature range Specifications Ethernet Interface Standards IEEE 802.3 for10BaseTIEEE 802.3u for 100BaseT(X) and 100Ba...