MOXA IMC-21GA-T Ethernet-to-Fiber Media Converter
Supports 1000Base-SX/LX with SC connector or SFP slot
Link Fault Pass-Through (LFPT)
10K jumbo frame
Redundant power inputs
-40 to 75°C operating temperature range (-T models)
Supports Energy-Efficient Ethernet (IEEE 802.3az)
Ethernet Interface
| 10/100/1000BaseT(X) Ports (RJ45 connector) | 1 |
| 100/1000BaseSFP Ports | IMC-21GA models: 1 |
| 1000BaseSX Ports (multi-mode SC connector) | IMC-21GA-SX-SC models: 1 |
| 1000BaseLX Ports (single-mode SC connector)Magnetic Isolation Protection | IMC-21GA-LX-SC models: 1 |
| Magnetic Isolation Protection | 1.5 kV (built-in) |
Power Parameters
| Input Current | 284.7 mA@12to 48 VDC |
| Input Voltage | 12 to 48 VDC |
| Overload Current Protection | Supported |
| Power Connector | Terminal block |
| Power Consumption | 284.7 mA@12to 48 VDC |
Physical Characteristics
| Housing | Metal |
| Dimensions | 30x125x79 mm(1.19x4.92x3.11 in) |
| Weight | 170g(0.37 lb) |
| Installation | DIN-rail mounting |
Environmental Limits
| Operating Temperature | Standard Models: -10 to 60°C (14to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Storage Temperature (package included) | -40 to 75°C (-40 to167°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
Standards and Certifications
| EMC | EN 55032/24 |
| EMI | CISPR 32, FCC Part 15B Class A |
| EMS | IEC 61000-4-2 ESD: Contact: 6 kV; Air:8 kVIEC 61000-4-3 RS:80 MHz to 1 GHz: 10 V/mIEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m IEC 61000-4-8 PFMF IEC 61000-4-11 |
| Environmental Testing | IEC 60068-2-1IEC 60068-2-2IEC 60068-2-3 |
| Safety | EN 60950-1, UL60950-1 |
| Vibration | IEC 60068-2-6 |
MTBF
| Time | 2,762,058 hrs |
| Standards | MIL-HDBK-217F |
MOXA IMC-21GA-T Available Models
| Model Name | Operating Temp. | Fiber Module Type |
| IMC-21GA | -10 to 60°C | SFP |
| IMC-21GA-T | -40 to 75°C | SFP |
| IMC-21GA-SX-SC | -10 to 60°C | Multi-mode SC |
| IMC-21GA-SX-SC-T | -40 to 75°C | Multi-mode SC |
| IMC-21GA-LX-SC | -10 to 60°C | Single-mode SC |
| IMC-21GA-LX-SC-T | -40 to 75°C | Single-mode SC |
Related products
-
MOXA NPort IA-5250A Device Server
Introduction NPort IA device servers provide easy and reliable serial-to-Ethernet connectivity for industrial automation applications. The device servers can connect any serial device to an Ethernet network, and to ensure compatibility with network software, they support a variety of port operation modes, including TCP Server, TCP Client, and UDP. The rock-solid reliability of the NPortIA device servers makes them an ideal choice for establi...
-
MOXA IMC-21GA-LX-SC Ethernet-to-Fiber Media Con...
Features and Benefits Supports 1000Base-SX/LX with SC connector or SFP slot Link Fault Pass-Through (LFPT) 10K jumbo frame Redundant power inputs -40 to 75°C operating temperature range (-T models) Supports Energy-Efficient Ethernet (IEEE 802.3az) Specifications Ethernet Interface 10/100/1000BaseT(X) Ports (RJ45 connector...
-
MOXA EDS-G512E-8PoE-4GSFP Full Gigabit Managed ...
Features and Benefits 8 IEEE 802.3af and IEEE 802.3at PoE+ standard ports36-watt output per PoE+ port in high-power mode Turbo Ring and Turbo Chain (recovery time < 50 ms @ 250 switches), RSTP/STP, and MSTP for network redundancy RADIUS, TACACS+, MAB Authentication, SNMPv3, IEEE 802.1X, MAC ACL, HTTPS, SSH, and sticky MAC-addresses to enhance network security Security features based on IEC 62443 EtherNet/IP, PR...
-
MOXA TCC-80 Serial-to-Serial Converter
Introduction The TCC-80/80I media converters provide complete signal conversion between RS-232 and RS-422/485, without requiring an external power source. The converters support both half-duplex 2-wire RS-485 and full-duplex 4-wire RS-422/485, either of which can be converted between RS-232’s TxD and RxD lines. Automatic data direction control is provided for RS-485. In this case, the RS-485 driver is enabled automatically whe...
-
MOXA NPort IA-5150A industrial automation devic...
Introduction The NPort IA5000A device servers are designed for connecting industrial automation serial devices, such as PLCs, sensors, meters, motors, drives, barcode readers, and operator displays. The device servers are solidly built, come in a metal housing and with screw connectors, and provide full surge protection. The NPort IA5000A device servers are extremely user-friendly, making simple and reliable serial-to-Ethernet solutions possi...
-
MOXA NPort 5410 Industrial General Serial Devic...
Features and Benefits User-friendly LCD panel for easy installation Adjustable termination and pull high/low resistors Socket modes: TCP server, TCP client, UDP Configure by Telnet, web browser, or Windows utility SNMP MIB-II for network management 2 kV isolation protection for NPort 5430I/5450I/5450I-T -40 to 75°C operating temperature range (-T model) Speci...