MOXA ICF-1150I-S-ST Serial-to-Fiber Converter
3-way communication: RS-232, RS-422/485, and fiber
Rotary switch to change the pull high/low resistor value
Extends RS-232/422/485 transmission up to 40 km with single-mode or 5 km with multi-mode
-40 to 85°C wide-temperature range models available
C1D2, ATEX, and IECEx certified for harsh industrial environments
Serial Interface
| No. of Ports | 2 |
| Serial Standards | RS-232RS-422RS-485 |
| Baudrate | 50 bps to 921.6 kbps (supports non-standard baudrates) |
| Flow Control | ADDC (automatic data direction control) for RS-485 |
| Connector | DB9 female for RS-232 interface5-pin terminal block for RS-422/485 interfaceFiber ports for RS-232/422/485 interface |
| Isolation | 2 kV (I models) |
Serial Signals
| RS-232 | TxD, RxD, GND |
| RS-422 | Tx+, Tx-, Rx+, Rx-, GND |
| RS-485-4w | Tx+, Tx-, Rx+, Rx-, GND |
| RS-485-2w | Data+, Data-, GND |
Power Parameters
| Input Current | ICF-1150 Series: 264 mA@12to 48 VDC ICF-1150I Series: 300 mA@12to 48 VDC |
| Input Voltage | 12to48 VDC |
| No. of Power Inputs | 1 |
| Overload Current Protection | Supported |
| Power Connector | Terminal block |
| Power Consumption | ICF-1150 Series: 264 mA@12to 48 VDC ICF-1150I Series: 300 mA@12to 48 VDC |
Physical Characteristics
| Housing | Metal |
| IP Rating | IP30 |
| Dimensions | 30.3 x70 x115 mm (1.19x 2.76 x 4.53 in) |
| Weight | 330 g (0.73 lb) |
| Installation | DIN-rail mounting |
Environmental Limits
| Operating Temperature | Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 85°C (-40 to 185°F) |
| Storage Temperature (package included) | -40 to 85°C (-40 to185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
MOXA ICF-1150I-S-ST Available Models
| Model Name | Isolation | Operating Temp. | Fiber Module Type | IECEx Supported |
| ICF-1150-M-ST | - | 0 to 60°C | Multi-mode ST | - |
| ICF-1150-M-SC | - | 0 to 60°C | Multi-mode SC | - |
| ICF-1150-S-ST | - | 0 to 60°C | Single-mode ST | - |
| ICF-1150-S-SC | - | 0 to 60°C | Single-mode SC | - |
| ICF-1150-M-ST-T | - | -40 to 85°C | Multi-mode ST | - |
| ICF-1150-M-SC-T | - | -40 to 85°C | Multi-mode SC | - |
| ICF-1150-S-ST-T | - | -40 to 85°C | Single-mode ST | - |
| ICF-1150-S-SC-T | - | -40 to 85°C | Single-mode SC | - |
| ICF-1150I-M-ST | 2kV | 0 to 60°C | Multi-mode ST | - |
| ICF-1150I-M-SC | 2kV | 0 to 60°C | Multi-mode SC | - |
| ICF-1150I-S-ST | 2kV | 0 to 60°C | Single-mode ST | - |
| ICF-1150I-S-SC | 2kV | 0 to 60°C | Single-mode SC | - |
| ICF-1150I-M-ST-T | 2kV | -40 to 85°C | Multi-mode ST | - |
| ICF-1150I-M-SC-T | 2kV | -40 to 85°C | Multi-mode SC | - |
| ICF-1150I-S-ST-T | 2kV | -40 to 85°C | Single-mode ST | - |
| ICF-1150I-S-SC-T | 2kV | -40 to 85°C | Single-mode SC | - |
| ICF-1150-M-ST-IEX | - | 0to 60°C | Multi-mode ST | / |
| ICF-1150-M-SC-IEX | - | 0to 60°C | Multi-mode SC | / |
| ICF-1150-S-ST-IEX | - | 0to 60°C | Single-mode ST | / |
| ICF-1150-S-SC-IEX | - | 0to 60°C | Single-mode SC | / |
| ICF-1150-M-ST-T-IEX | - | -40 to 85°C | Multi-mode ST | / |
| ICF-1150-M-SC-T-IEX | - | -40 to 85°C | Multi-mode SC | / |
| ICF-1150-S-ST-T-IEX | - | -40 to 85°C | Single-mode ST | / |
| ICF-1150-S-SC-T-IEX | - | -40 to 85°C | Single-mode SC | / |
| ICF-1150I-M-ST-IEX | 2kV | 0to 60°C | Multi-mode ST | / |
| ICF-1150I-M-SC-IEX | 2kV | 0to 60°C | Multi-mode SC | / |
| ICF-1150I-S-ST-IEX | 2kV | 0to 60°C | Single-mode ST | / |
| ICF-1150I-S-SC-IEX | 2kV | 0to 60°C | Single-mode SC | / |
| ICF-1150I-M-ST-T-IEX | 2kV | -40 to 85°C | Multi-mode ST | / |
| ICF-1150I-M-SC-T-IEX | 2kV | -40 to 85°C | Multi-mode SC | / |
| ICF-1150I-S-ST-T-IEX | 2kV | -40 to 85°C | Single-mode ST | / |
| ICF-1150I-S-SC-T-IEX | 2kV | -40 to 85°C | Single-mode SC | / |
Related products
-
MOXA EDS-316 16-port unmanaged Ethernet switch
Introduction The EDS-316 Ethernet switches provide an economical solution for your industrial Ethernet connections. These 16-port switches come with a built-in relay warning function that alerts network engineers when power failures or port breaks occur. In addition, the switches are designed for harsh industrial environments, such as the hazardous locations defined by the Class 1 Div. 2 and ATEX Zone 2 standards....
-
MOXA IKS-6728A-4GTXSFP-HV-T Modular Managed PoE...
Features and Benefits 8 built-in PoE+ ports compliant with IEEE 802.3af/at (IKS-6728A-8PoE) Up to 36 W output per PoE+ port (IKS-6728A-8PoE) Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches) , and STP/RSTP/MSTP for network redundancy 1 kV LAN surge protection for extreme outdoor environments PoE diagnostics for powered-device mode analysis 4 Gigabit combo ports for high-bandwidth communicatio...
-
MOXA ICS-G7528A-4XG-HV-HV-T 24G+4 10GbE-port La...
Features and Benefits • 24 Gigabit Ethernet ports plus up to 4 10G Ethernet ports • Up to 28 optical fiber connections (SFP slots) • Fanless, -40 to 75°C operating temperature range (T models) • Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches)1, and STP/RSTP/MSTP for network redundancy • Isolated redundant power inputs with universal 110/220 VAC power supply range • Supports MXstudio for easy, visualized industrial n...
-
MOXA MGate MB3660-16-2AC Modbus TCP Gateway
Features and Benefits Supports Auto Device Routing for easy configuration Supports route by TCP port or IP address for flexible deployment Innovative Command Learning for improving system performance Supports agent mode for high performance through active and parallel polling of serial devices Supports Modbus serial master to Modbus serial slave communications 2 Ethernet ports with the same IP or dual IP addresses...
-
MOXA NPort 5110 Industrial General Device Server
Features and Benefits Small size for easy installation Real COM and TTY drivers for Windows, Linux, and macOS Standard TCP/IP interface and versatile operation modes Easy-to-use Windows utility for configuring multiple device servers SNMP MIB-II for network management Configure by Telnet, web browser, or Windows utility Adjustable pull high/low resistor for RS-485 ports ...
-
MOXA TSN-G5004 4G-port full Gigabit managed Eth...
Introduction The TSN-G5004 Series switches are ideal for making manufacturing networks compatible with the vision of Industry 4.0. The switches are equipped with 4 Gigabit Ethernet ports. The full Gigabit design makes them a good choice for upgrading an existing network to Gigabit speed or for building a new full-Gigabit backbone for future high-bandwidth applications. The compact design and user-friendly configur...